1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * Authors: 6 * Aneesh V <aneesh@ti.com> 7 * 8 * Derived from OMAP3 work by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <x0khasim@ti.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _OMAP4_H_ 16 #define _OMAP4_H_ 17 18 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) 19 #include <asm/types.h> 20 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ 21 22 #include <linux/sizes.h> 23 24 /* 25 * L4 Peripherals - L4 Wakeup and L4 Core now 26 */ 27 #define OMAP44XX_L4_CORE_BASE 0x4A000000 28 #define OMAP44XX_L4_WKUP_BASE 0x4A300000 29 #define OMAP44XX_L4_PER_BASE 0x48000000 30 31 #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 32 #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 33 #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START 34 #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END 35 36 /* CONTROL_ID_CODE */ 37 #define CONTROL_ID_CODE 0x4A002204 38 39 #define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F 40 #define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F 41 #define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F 42 #define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F 43 #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F 44 #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F 45 #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F 46 #define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F 47 48 /* UART */ 49 #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) 50 #define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) 51 #define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) 52 53 /* General Purpose Timers */ 54 #define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) 55 #define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) 56 #define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) 57 58 /* Watchdog Timer2 - MPU watchdog */ 59 #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) 60 61 /* 62 * Hardware Register Details 63 */ 64 65 /* Watchdog Timer */ 66 #define WD_UNLOCK1 0xAAAA 67 #define WD_UNLOCK2 0x5555 68 69 /* GP Timer */ 70 #define TCLR_ST (0x1 << 0) 71 #define TCLR_AR (0x1 << 1) 72 #define TCLR_PRE (0x1 << 5) 73 74 /* Control Module */ 75 #define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5) 76 #define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f 77 #define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110 78 #define CONTROL_EFUSE_2_OVERRIDE 0x99084000 79 80 /* LPDDR2 IO regs */ 81 #define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C 82 #define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E 83 #define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C 84 #define LPDDR2IO_GR10_WD_MASK (3 << 17) 85 #define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F 86 87 /* CONTROL_EFUSE_2 */ 88 #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 89 90 #define MMC1_PWRDNZ (1 << 26) 91 #define MMC1_PBIASLITE_PWRDNZ (1 << 22) 92 #define MMC1_PBIASLITE_VMODE (1 << 21) 93 94 #ifndef __ASSEMBLY__ 95 96 struct s32ktimer { 97 unsigned char res[0x10]; 98 unsigned int s32k_cr; /* 0x10 */ 99 }; 100 101 #define DEVICE_TYPE_SHIFT (0x8) 102 #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) 103 #define DEVICE_GP 0x3 104 105 #endif /* __ASSEMBLY__ */ 106 107 /* 108 * Non-secure SRAM Addresses 109 * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE 110 * at 0x40304000(EMU base) so that our code works for both EMU and GP 111 */ 112 #define NON_SECURE_SRAM_START 0x40304000 113 #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ 114 #define NON_SECURE_SRAM_IMG_END 0x4030C000 115 #define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) 116 /* base address for indirect vectors (internal boot mode) */ 117 #define SRAM_ROM_VECT_BASE 0x4030D000 118 119 /* ABB settings */ 120 #define OMAP_ABB_SETTLING_TIME 50 121 #define OMAP_ABB_CLOCK_CYCLES 16 122 123 /* ABB tranxdone mask */ 124 #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) 125 126 #define OMAP44XX_SAR_RAM_BASE 0x4a326000 127 #define OMAP_REBOOT_REASON_OFFSET 0xA0C 128 #define OMAP_REBOOT_REASON_SIZE 0x0F 129 130 /* Boot parameters */ 131 #ifndef __ASSEMBLY__ 132 struct omap_boot_parameters { 133 unsigned int boot_message; 134 unsigned int boot_device_descriptor; 135 unsigned char boot_device; 136 unsigned char reset_reason; 137 unsigned char ch_flags; 138 }; 139 140 int omap_reboot_mode(char *mode, unsigned int length); 141 int omap_reboot_mode_clear(void); 142 int omap_reboot_mode_store(char *mode); 143 #endif 144 145 #endif 146