1 /* 2 * (C) Copyright 2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * Authors: 6 * Aneesh V <aneesh@ti.com> 7 * 8 * Derived from OMAP3 work by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <x0khasim@ti.com> 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #ifndef _OMAP4_H_ 16 #define _OMAP4_H_ 17 18 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) 19 #include <asm/types.h> 20 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ 21 22 /* 23 * L4 Peripherals - L4 Wakeup and L4 Core now 24 */ 25 #define OMAP44XX_L4_CORE_BASE 0x4A000000 26 #define OMAP44XX_L4_WKUP_BASE 0x4A300000 27 #define OMAP44XX_L4_PER_BASE 0x48000000 28 29 #define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000 30 #define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000 31 #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START 32 #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END 33 34 /* CONTROL_ID_CODE */ 35 #define CONTROL_ID_CODE 0x4A002204 36 #define STD_FUSE_DIE_ID_0 0x4A002200 37 #define STD_FUSE_DIE_ID_1 0x4A002208 38 #define STD_FUSE_DIE_ID_2 0x4A00220c 39 #define STD_FUSE_DIE_ID_3 0x4A002210 40 41 #define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F 42 #define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F 43 #define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F 44 #define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F 45 #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F 46 #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F 47 #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F 48 #define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F 49 50 /* UART */ 51 #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) 52 #define UART2_BASE (OMAP44XX_L4_PER_BASE + 0x6c000) 53 #define UART3_BASE (OMAP44XX_L4_PER_BASE + 0x20000) 54 55 /* General Purpose Timers */ 56 #define GPT1_BASE (OMAP44XX_L4_WKUP_BASE + 0x18000) 57 #define GPT2_BASE (OMAP44XX_L4_PER_BASE + 0x32000) 58 #define GPT3_BASE (OMAP44XX_L4_PER_BASE + 0x34000) 59 60 /* Watchdog Timer2 - MPU watchdog */ 61 #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) 62 63 /* GPMC */ 64 #define OMAP44XX_GPMC_BASE 0x50000000 65 66 /* 67 * Hardware Register Details 68 */ 69 70 /* Watchdog Timer */ 71 #define WD_UNLOCK1 0xAAAA 72 #define WD_UNLOCK2 0x5555 73 74 /* GP Timer */ 75 #define TCLR_ST (0x1 << 0) 76 #define TCLR_AR (0x1 << 1) 77 #define TCLR_PRE (0x1 << 5) 78 79 /* Control Module */ 80 #define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5) 81 #define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f 82 #define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110 83 #define CONTROL_EFUSE_2_OVERRIDE 0x99084000 84 85 /* LPDDR2 IO regs */ 86 #define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C 87 #define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E 88 #define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C 89 #define LPDDR2IO_GR10_WD_MASK (3 << 17) 90 #define CONTROL_LPDDR2IO_3_VAL 0xA0888C0F 91 92 /* CONTROL_EFUSE_2 */ 93 #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 94 95 #define MMC1_PWRDNZ (1 << 26) 96 #define MMC1_PBIASLITE_PWRDNZ (1 << 22) 97 #define MMC1_PBIASLITE_VMODE (1 << 21) 98 99 #ifndef __ASSEMBLY__ 100 101 struct s32ktimer { 102 unsigned char res[0x10]; 103 unsigned int s32k_cr; /* 0x10 */ 104 }; 105 106 #define DEVICE_TYPE_SHIFT (0x8) 107 #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) 108 #define DEVICE_GP 0x3 109 110 #endif /* __ASSEMBLY__ */ 111 112 /* 113 * Non-secure SRAM Addresses 114 * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE 115 * at 0x40304000(EMU base) so that our code works for both EMU and GP 116 */ 117 #define NON_SECURE_SRAM_START 0x40304000 118 #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ 119 #define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 120 /* base address for indirect vectors (internal boot mode) */ 121 #define SRAM_ROM_VECT_BASE 0x4030D000 122 123 /* ABB settings */ 124 #define OMAP_ABB_SETTLING_TIME 50 125 #define OMAP_ABB_CLOCK_CYCLES 16 126 127 /* ABB tranxdone mask */ 128 #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) 129 130 #endif 131