1 /* 2 * (C) Copyright 2006-2008 3 * Texas Instruments, <www.ti.com> 4 * Richard Woodruff <r-woodruff2@ti.com> 5 * Syed Mohammed Khasim <x0khasim@ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _OMAP3_H_ 11 #define _OMAP3_H_ 12 13 #include <linux/sizes.h> 14 15 /* Stuff on L3 Interconnect */ 16 #define SMX_APE_BASE 0x68000000 17 18 /* GPMC */ 19 #define OMAP34XX_GPMC_BASE 0x6E000000 20 21 /* SMS */ 22 #define OMAP34XX_SMS_BASE 0x6C000000 23 24 /* SDRC */ 25 #define OMAP34XX_SDRC_BASE 0x6D000000 26 27 /* 28 * L4 Peripherals - L4 Wakeup and L4 Core now 29 */ 30 #define OMAP34XX_CORE_L4_IO_BASE 0x48000000 31 #define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 32 #define OMAP34XX_ID_L4_IO_BASE 0x4830A200 33 #define OMAP34XX_L4_PER 0x49000000 34 #define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE 35 36 /* DMA4/SDMA */ 37 #define OMAP34XX_DMA4_BASE 0x48056000 38 39 /* CONTROL */ 40 #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) 41 42 #ifndef __ASSEMBLY__ 43 /* Signal Integrity Parameter Control Registers */ 44 struct control_prog_io { 45 unsigned char res[0x408]; 46 unsigned int io2; /* 0x408 */ 47 unsigned char res2[0x38]; 48 unsigned int io0; /* 0x444 */ 49 unsigned int io1; /* 0x448 */ 50 }; 51 #endif /* __ASSEMBLY__ */ 52 53 /* Bit definition for CONTROL_PROG_IO1 */ 54 #define PRG_I2C2_PULLUPRESX 0x00000001 55 56 /* Scratchpad memory */ 57 #define OMAP34XX_SCRATCHPAD (OMAP34XX_CTRL_BASE + 0x910) 58 59 /* UART */ 60 #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) 61 #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) 62 #define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) 63 #define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000) 64 65 /* General Purpose Timers */ 66 #define OMAP34XX_GPT1 0x48318000 67 #define OMAP34XX_GPT2 0x49032000 68 #define OMAP34XX_GPT3 0x49034000 69 #define OMAP34XX_GPT4 0x49036000 70 #define OMAP34XX_GPT5 0x49038000 71 #define OMAP34XX_GPT6 0x4903A000 72 #define OMAP34XX_GPT7 0x4903C000 73 #define OMAP34XX_GPT8 0x4903E000 74 #define OMAP34XX_GPT9 0x49040000 75 #define OMAP34XX_GPT10 0x48086000 76 #define OMAP34XX_GPT11 0x48088000 77 #define OMAP34XX_GPT12 0x48304000 78 79 /* WatchDog Timers (1 secure, 3 GP) */ 80 #define WD1_BASE 0x4830C000 81 #define WD2_BASE 0x48314000 82 #define WD3_BASE 0x49030000 83 84 /* 32KTIMER */ 85 #define SYNC_32KTIMER_BASE 0x48320000 86 87 #ifndef __ASSEMBLY__ 88 89 struct s32ktimer { 90 unsigned char res[0x10]; 91 unsigned int s32k_cr; /* 0x10 */ 92 }; 93 94 #endif /* __ASSEMBLY__ */ 95 96 #ifndef __ASSEMBLY__ 97 struct gpio { 98 unsigned char res1[0x34]; 99 unsigned int oe; /* 0x34 */ 100 unsigned int datain; /* 0x38 */ 101 unsigned char res2[0x54]; 102 unsigned int cleardataout; /* 0x90 */ 103 unsigned int setdataout; /* 0x94 */ 104 }; 105 #endif /* __ASSEMBLY__ */ 106 107 #define GPIO0 (0x1 << 0) 108 #define GPIO1 (0x1 << 1) 109 #define GPIO2 (0x1 << 2) 110 #define GPIO3 (0x1 << 3) 111 #define GPIO4 (0x1 << 4) 112 #define GPIO5 (0x1 << 5) 113 #define GPIO6 (0x1 << 6) 114 #define GPIO7 (0x1 << 7) 115 #define GPIO8 (0x1 << 8) 116 #define GPIO9 (0x1 << 9) 117 #define GPIO10 (0x1 << 10) 118 #define GPIO11 (0x1 << 11) 119 #define GPIO12 (0x1 << 12) 120 #define GPIO13 (0x1 << 13) 121 #define GPIO14 (0x1 << 14) 122 #define GPIO15 (0x1 << 15) 123 #define GPIO16 (0x1 << 16) 124 #define GPIO17 (0x1 << 17) 125 #define GPIO18 (0x1 << 18) 126 #define GPIO19 (0x1 << 19) 127 #define GPIO20 (0x1 << 20) 128 #define GPIO21 (0x1 << 21) 129 #define GPIO22 (0x1 << 22) 130 #define GPIO23 (0x1 << 23) 131 #define GPIO24 (0x1 << 24) 132 #define GPIO25 (0x1 << 25) 133 #define GPIO26 (0x1 << 26) 134 #define GPIO27 (0x1 << 27) 135 #define GPIO28 (0x1 << 28) 136 #define GPIO29 (0x1 << 29) 137 #define GPIO30 (0x1 << 30) 138 #define GPIO31 (0x1 << 31) 139 140 /* base address for indirect vectors (internal boot mode) */ 141 #define SRAM_OFFSET0 0x40000000 142 #define SRAM_OFFSET1 0x00200000 143 #define SRAM_OFFSET2 0x0000F800 144 #define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ 145 SRAM_OFFSET2) 146 #define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) 147 148 #define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ 149 #define NON_SECURE_SRAM_END 0x40210000 150 #define NON_SECURE_SRAM_IMG_END 0x4020F000 151 #define SRAM_SCRATCH_SPACE_ADDR (NON_SECURE_SRAM_IMG_END - SZ_1K) 152 153 #define LOW_LEVEL_SRAM_STACK 0x4020FFFC 154 155 /* scratch area - accessible on both EMU and GP */ 156 #define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START 157 158 #define DEBUG_LED1 149 /* gpio */ 159 #define DEBUG_LED2 150 /* gpio */ 160 161 #define XDR_POP 5 /* package on package part */ 162 #define SDR_DISCRETE 4 /* 128M memory SDR module */ 163 #define DDR_STACKED 3 /* stacked part on 2422 */ 164 #define DDR_COMBO 2 /* combo part on cpu daughter card */ 165 #define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ 166 167 #define DDR_100 100 /* type found on most mem d-boards */ 168 #define DDR_111 111 /* some combo parts */ 169 #define DDR_133 133 /* most combo, some mem d-boards */ 170 #define DDR_165 165 /* future parts */ 171 172 #define CPU_3430 0x3430 173 174 /* 175 * 343x real hardware: 176 * ES1 = rev 0 177 * 178 * ES2 onwards, the value maps to contents of IDCODE register [31:28]. 179 * 180 * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. 181 */ 182 #define CPU_3XX_ES10 0 183 #define CPU_3XX_ES20 1 184 #define CPU_3XX_ES21 2 185 #define CPU_3XX_ES30 3 186 #define CPU_3XX_ES31 4 187 #define CPU_3XX_ES312 7 188 #define CPU_3XX_MAX_REV 8 189 190 /* 191 * 37xx real hardware: 192 * ES1.0 onwards, the value maps to contents of IDCODE register [31:28]. 193 */ 194 195 #define CPU_37XX_ES10 0 196 #define CPU_37XX_ES11 1 197 #define CPU_37XX_ES12 2 198 #define CPU_37XX_MAX_REV 3 199 200 #define CPU_3XX_ID_SHIFT 28 201 202 #define WIDTH_8BIT 0x0000 203 #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ 204 205 /* 206 * Hawkeye values 207 */ 208 #define HAWKEYE_OMAP34XX 0xb7ae 209 #define HAWKEYE_AM35XX 0xb868 210 #define HAWKEYE_OMAP36XX 0xb891 211 212 #define HAWKEYE_SHIFT 12 213 214 /* 215 * Define CPU families 216 */ 217 #define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ 218 #define CPU_AM35XX 0x3500 /* AM35xx devices */ 219 #define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ 220 221 /* 222 * Control status register values corresponding to cpu variants 223 */ 224 #define OMAP3503 0x5c00 225 #define OMAP3515 0x1c00 226 #define OMAP3525 0x4c00 227 #define OMAP3530 0x0c00 228 229 #define AM3505 0x5c00 230 #define AM3517 0x1c00 231 232 #define OMAP3730 0x0c00 233 #define OMAP3725 0x4c00 234 #define AM3715 0x1c00 235 #define AM3703 0x5c00 236 237 #define OMAP3730_1GHZ 0x0e00 238 #define OMAP3725_1GHZ 0x4e00 239 #define AM3715_1GHZ 0x1e00 240 #define AM3703_1GHZ 0x5e00 241 242 /* 243 * ROM code API related flags 244 */ 245 #define OMAP3_GP_ROMCODE_API_L2_INVAL 1 246 #define OMAP3_GP_ROMCODE_API_WRITE_ACR 3 247 248 /* 249 * EMU device PPA HAL related flags 250 */ 251 #define OMAP3_EMU_HAL_API_L2_INVAL 40 252 #define OMAP3_EMU_HAL_API_WRITE_ACR 42 253 254 #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 255 256 /* ABB settings */ 257 #define OMAP_ABB_SETTLING_TIME 30 258 #define OMAP_ABB_CLOCK_CYCLES 8 259 260 /* ABB tranxdone mask */ 261 #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) 262 263 #define OMAP_REBOOT_REASON_OFFSET 0x04 264 265 /* Boot parameters */ 266 #ifndef __ASSEMBLY__ 267 struct omap_boot_parameters { 268 unsigned int boot_message; 269 unsigned char boot_device; 270 unsigned char reserved; 271 unsigned char reset_reason; 272 unsigned char ch_flags; 273 unsigned int boot_device_descriptor; 274 }; 275 276 int omap_reboot_mode(char *mode, unsigned int length); 277 int omap_reboot_mode_clear(void); 278 int omap_reboot_mode_store(char *mode); 279 #endif 280 281 #endif 282