1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2018 NXP 4 */ 5 6 #ifndef SC_PAD_API_H 7 #define SC_PAD_API_H 8 9 /* Defines for sc_pad_config_t */ 10 #define SC_PAD_CONFIG_NORMAL 0U /* Normal */ 11 #define SC_PAD_CONFIG_OD 1U /* Open Drain */ 12 #define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ 13 #define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ 14 15 /* Defines for sc_pad_iso_t */ 16 #define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ 17 #define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ 18 #define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ 19 #define SC_PAD_ISO_ON 3U /* ISO latched data is held */ 20 21 /* Defines for sc_pad_28fdsoi_dse_t */ 22 #define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ 23 #define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ 24 #define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ 25 #define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ 26 #define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ 27 #define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ 28 #define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ 29 #define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed for 1.8v */ 30 #define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ 31 #define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ 32 #define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ 33 #define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ 34 #define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength dual volt */ 35 #define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength dual volt */ 36 37 /* Defines for sc_pad_28fdsoi_ps_t */ 38 #define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ 39 #define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ 40 #define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ 41 #define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ 42 43 /* Defines for sc_pad_28fdsoi_pus_t */ 44 #define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ 45 #define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ 46 #define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ 47 #define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ 48 49 /* Defines for sc_pad_wakeup_t */ 50 #define SC_PAD_WAKEUP_OFF 0U /* Off */ 51 #define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ 52 #define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ 53 #define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ 54 #define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ 55 #define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ 56 57 #endif /* SC_PAD_API_H */ 58