1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2017 Linaro 4 * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 5 */ 6 7 #ifndef __HI3798cv200_H__ 8 #define __HI3798cv200_H__ 9 10 #define REG_BASE_PERI_CTRL 0xF8A20000 11 #define REG_BASE_CRG 0xF8A22000 12 13 /* DEVICES */ 14 #define REG_BASE_MCI 0xF9830000 15 #define REG_BASE_UART0 0xF8B00000 16 17 /* PERI control registers (4KB) */ 18 /* USB2 PHY01 configuration register */ 19 #define PERI_CTRL_USB0 (REG_BASE_PERI_CTRL + 0x120) 20 21 /* PERI CRG registers (4KB) */ 22 /* USB2 CTRL0 clock and soft reset */ 23 #define PERI_CRG46 (REG_BASE_CRG + 0xb8) 24 #define USB2_BUS_CKEN (1<<0) 25 #define USB2_OHCI48M_CKEN (1<<1) 26 #define USB2_OHCI12M_CKEN (1<<2) 27 #define USB2_OTG_UTMI_CKEN (1<<3) 28 #define USB2_HST_PHY_CKEN (1<<4) 29 #define USB2_UTMI0_CKEN (1<<5) 30 #define USB2_BUS_SRST_REQ (1<<12) 31 #define USB2_UTMI0_SRST_REQ (1<<13) 32 #define USB2_HST_PHY_SYST_REQ (1<<16) 33 #define USB2_OTG_PHY_SYST_REQ (1<<17) 34 #define USB2_CLK48_SEL (1<<20) 35 36 /* USB2 PHY clock and soft reset */ 37 #define PERI_CRG47 (REG_BASE_CRG + 0xbc) 38 #define USB2_PHY01_REF_CKEN (1 << 0) 39 #define USB2_PHY2_REF_CKEN (1 << 2) 40 #define USB2_PHY01_SRST_REQ (1 << 4) 41 #define USB2_PHY2_SRST_REQ (1 << 6) 42 #define USB2_PHY01_SRST_TREQ0 (1 << 8) 43 #define USB2_PHY01_SRST_TREQ1 (1 << 9) 44 #define USB2_PHY2_SRST_TREQ (1 << 10) 45 #define USB2_PHY01_REFCLK_SEL (1 << 12) 46 #define USB2_PHY2_REFCLK_SEL (1 << 14) 47 48 49 #endif 50