1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2017 Linaro 4 * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> 5 */ 6 7 #ifndef __HI3798cv200_H__ 8 #define __HI3798cv200_H__ 9 10 #define REG_BASE_PERI_CTRL 0xF8A20000 11 #define REG_BASE_CRG 0xF8A22000 12 13 /* DEVICES */ 14 #define REG_BASE_MCI 0xF9830000 15 #define REG_BASE_UART0 0xF8B00000 16 #define HIOTG_BASE_ADDR 0xF98C0000 17 18 /* PERI control registers (4KB) */ 19 /* USB2 PHY01 configuration register */ 20 #define PERI_CTRL_USB0 (REG_BASE_PERI_CTRL + 0x120) 21 22 /* USB2 controller configuration register */ 23 #define PERI_CTRL_USB3 (REG_BASE_PERI_CTRL + 0x12c) 24 #define USB2_2P_CHIPID (1 << 28) 25 26 /* PERI CRG registers (4KB) */ 27 /* USB2 CTRL0 clock and soft reset */ 28 #define PERI_CRG46 (REG_BASE_CRG + 0xb8) 29 #define USB2_BUS_CKEN (1<<0) 30 #define USB2_OHCI48M_CKEN (1<<1) 31 #define USB2_OHCI12M_CKEN (1<<2) 32 #define USB2_OTG_UTMI_CKEN (1<<3) 33 #define USB2_HST_PHY_CKEN (1<<4) 34 #define USB2_UTMI0_CKEN (1<<5) 35 #define USB2_BUS_SRST_REQ (1<<12) 36 #define USB2_UTMI0_SRST_REQ (1<<13) 37 #define USB2_HST_PHY_SYST_REQ (1<<16) 38 #define USB2_OTG_PHY_SYST_REQ (1<<17) 39 #define USB2_CLK48_SEL (1<<20) 40 41 /* USB2 PHY clock and soft reset */ 42 #define PERI_CRG47 (REG_BASE_CRG + 0xbc) 43 #define USB2_PHY01_REF_CKEN (1 << 0) 44 #define USB2_PHY2_REF_CKEN (1 << 2) 45 #define USB2_PHY01_SRST_REQ (1 << 4) 46 #define USB2_PHY2_SRST_REQ (1 << 6) 47 #define USB2_PHY01_SRST_TREQ0 (1 << 8) 48 #define USB2_PHY01_SRST_TREQ1 (1 << 9) 49 #define USB2_PHY2_SRST_TREQ (1 << 10) 50 #define USB2_PHY01_REFCLK_SEL (1 << 12) 51 #define USB2_PHY2_REFCLK_SEL (1 << 14) 52 53 54 #endif 55