1 /*
2  * Copyright 2017 NXP Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  *
6  */
7 #ifndef __FSL_STREAM_ID_H
8 #define __FSL_STREAM_ID_H
9 
10 /*
11  * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices
12  * are not hardwired and are programmed by sw.  There are a limited number
13  * of stream IDs available, and the partitioning of them is scenario
14  * dependent. This header defines the partitioning between legacy, PCI,
15  * and DPAA1 devices.
16  *
17  * This partitioning can be customized in this file depending
18  * on the specific hardware config:
19  *
20  *  -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc)
21  *     -all legacy devices get a unique stream ID assigned and programmed in
22  *      their AMQR registers by u-boot
23  *
24  *  -PCIe
25  *     -there is a range of stream IDs set aside for PCI in this
26  *      file.  U-boot will scan the PCI bus and for each device discovered:
27  *         -allocate a streamID
28  *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
29  *         -set a msi-map entry in the PEXn controller node in the
30  *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
31  *          for more info on the msi-map definition)
32  *         -set a iommu-map entry in the PEXn controller node in the
33  *          device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt
34  *          for more info on the iommu-map definition)
35  *
36  *  -DPAA1
37  *     - Stream ids for DPAA1 use are reserved for future usecase.
38  *
39  */
40 
41 
42 #define FSL_INVALID_STREAM_ID		0
43 
44 /* legacy devices */
45 #define FSL_USB1_STREAM_ID		1
46 #define FSL_USB2_STREAM_ID		2
47 #define FSL_USB3_STREAM_ID		3
48 #define FSL_SDHC_STREAM_ID		4
49 #define FSL_SATA_STREAM_ID		5
50 #define FSL_QE_STREAM_ID		6
51 #define FSL_QDMA_STREAM_ID		7
52 #define FSL_EDMA_STREAM_ID		8
53 #define FSL_ETR_STREAM_ID		9
54 
55 /* PCI - programmed in PEXn_LUT */
56 #define FSL_PEX_STREAM_ID_START		11
57 #define FSL_PEX_STREAM_ID_END		26
58 
59 /* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */
60 #define FSL_DPAA1_STREAM_ID_START	27
61 #define FSL_DPAA1_STREAM_ID_END		63
62 
63 #endif
64