1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Xilinx ZC770 XM013 board DTS
4 *
5 * Copyright (C) 2013 Xilinx, Inc.
6 */
7/dts-v1/;
8#include "zynq-7000.dtsi"
9
10/ {
11	model = "Xilinx ZC770 XM013 board";
12	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
13
14	aliases {
15		ethernet0 = &gem1;
16		i2c0 = &i2c1;
17		serial0 = &uart0;
18		spi0 = &qspi;
19		spi1 = &spi0;
20	};
21
22	chosen {
23		bootargs = "";
24		stdout-path = "serial0:115200n8";
25	};
26
27	memory@0 {
28		device_type = "memory";
29		reg = <0x0 0x40000000>;
30	};
31};
32
33&can1 {
34	status = "okay";
35};
36
37&gem1 {
38	status = "okay";
39	phy-mode = "rgmii-id";
40	phy-handle = <&ethernet_phy>;
41
42	ethernet_phy: ethernet-phy@7 {
43		reg = <7>;
44		device_type = "ethernet-phy";
45	};
46};
47
48&i2c1 {
49	status = "okay";
50	clock-frequency = <400000>;
51
52	si570: clock-generator@55 {
53		#clock-cells = <0>;
54		compatible = "silabs,si570";
55		temperature-stability = <50>;
56		reg = <0x55>;
57		factory-fout = <156250000>;
58		clock-frequency = <148500000>;
59	};
60};
61
62&qspi {
63	status = "okay";
64};
65
66&spi0 {
67	status = "okay";
68	num-cs = <4>;
69	is-decoded-cs = <0>;
70	eeprom: eeprom@0 {
71		at25,byte-len = <8192>;
72		at25,addr-mode = <2>;
73		at25,page-size = <32>;
74
75		compatible = "atmel,at25";
76		reg = <2>;
77		spi-max-frequency = <1000000>;
78	};
79};
80
81&uart0 {
82	u-boot,dm-pre-reloc;
83	status = "okay";
84};
85