1/*
2 * Xilinx ZC770 XM013 board DTS
3 *
4 * Copyright (C) 2013 Xilinx, Inc.
5 *
6 * SPDX-License-Identifier:	GPL-2.0+
7 */
8/dts-v1/;
9#include "zynq-7000.dtsi"
10
11/ {
12	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
13	model = "Xilinx Zynq";
14
15	aliases {
16		ethernet0 = &gem1;
17		i2c0 = &i2c1;
18		serial0 = &uart0;
19		spi0 = &qspi;
20		spi1 = &spi0;
21	};
22
23	chosen {
24		bootargs = "";
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory@0 {
29		device_type = "memory";
30		reg = <0x0 0x40000000>;
31	};
32};
33
34&can1 {
35	status = "okay";
36};
37
38&gem1 {
39	status = "okay";
40	phy-mode = "rgmii-id";
41	phy-handle = <&ethernet_phy>;
42
43	ethernet_phy: ethernet-phy@7 {
44		reg = <7>;
45		device_type = "ethernet-phy";
46	};
47};
48
49&i2c1 {
50	status = "okay";
51	clock-frequency = <400000>;
52
53	si570: clock-generator@55 {
54		#clock-cells = <0>;
55		compatible = "silabs,si570";
56		temperature-stability = <50>;
57		reg = <0x55>;
58		factory-fout = <156250000>;
59		clock-frequency = <148500000>;
60	};
61};
62
63&qspi {
64	status = "okay";
65};
66
67&spi0 {
68	status = "okay";
69	num-cs = <4>;
70	is-decoded-cs = <0>;
71	eeprom: at25@0 {
72		at25,byte-len = <8192>;
73		at25,addr-mode = <2>;
74		at25,page-size = <32>;
75
76		compatible = "atmel,at25";
77		reg = <2>;
78		spi-max-frequency = <1000000>;
79	};
80};
81
82&uart0 {
83	u-boot,dm-pre-reloc;
84	status = "okay";
85};
86