1/*
2 * Xilinx ZC770 XM010 board DTS
3 *
4 * Copyright (C) 2013 - 2015 Xilinx, Inc.
5 *
6 * SPDX-License-Identifier:	GPL-2.0+
7 */
8/dts-v1/;
9#include "zynq-7000.dtsi"
10
11/ {
12	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
13	model = "Xilinx Zynq";
14
15	aliases {
16		ethernet0 = &gem0;
17		i2c0 = &i2c0;
18		serial0 = &uart1;
19		spi0 = &qspi;
20		spi1 = &spi1;
21	};
22
23	chosen {
24		bootargs = "";
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory {
29		device_type = "memory";
30		reg = <0x0 0x40000000>;
31	};
32
33	usb_phy0: phy0 {
34		compatible = "usb-nop-xceiv";
35		#phy-cells = <0>;
36	};
37};
38
39&can0 {
40	status = "okay";
41};
42
43&gem0 {
44	status = "okay";
45	phy-mode = "rgmii-id";
46	phy-handle = <&ethernet_phy>;
47
48	ethernet_phy: ethernet-phy@7 {
49		reg = <7>;
50	};
51};
52
53&i2c0 {
54	status = "okay";
55	clock-frequency = <400000>;
56
57	m24c02_eeprom@52 {
58		compatible = "at,24c02";
59		reg = <0x52>;
60	};
61
62};
63
64&qspi {
65	status = "okay";
66};
67
68&sdhci0 {
69	status = "okay";
70};
71
72&spi1 {
73	status = "okay";
74	num-cs = <4>;
75	is-decoded-cs = <0>;
76	flash@0 {
77		compatible = "sst25wf080";
78		reg = <1>;
79		spi-max-frequency = <1000000>;
80		#address-cells = <1>;
81		#size-cells = <1>;
82		partition@test {
83			label = "spi-flash";
84			reg = <0x0 0x100000>;
85		};
86	};
87};
88
89&uart1 {
90	u-boot,dm-pre-reloc;
91	status = "okay";
92};
93
94&usb0 {
95	status = "okay";
96	dr_mode = "host";
97	usb-phy = <&usb_phy0>;
98};
99