1/*
2 * Xilinx ZC770 XM010 board DTS
3 *
4 * Copyright (C) 2013 - 2015 Xilinx, Inc.
5 *
6 * SPDX-License-Identifier:	GPL-2.0+
7 */
8/dts-v1/;
9#include "zynq-7000.dtsi"
10
11/ {
12	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
13	model = "Xilinx Zynq";
14
15	aliases {
16		ethernet0 = &gem0;
17		i2c0 = &i2c0;
18		serial0 = &uart1;
19		spi0 = &qspi;
20		spi1 = &spi1;
21	};
22
23	chosen {
24		bootargs = "console=ttyPS0,115200 root=/dev/ram rw earlyprintk";
25		linux,stdout-path = &uart1;
26		stdout-path = &uart1;
27	};
28
29	memory {
30		device_type = "memory";
31		reg = <0x0 0x40000000>;
32	};
33
34	usb_phy0: phy0 {
35		compatible = "usb-nop-xceiv";
36		#phy-cells = <0>;
37	};
38};
39
40&spi1 {
41	status = "okay";
42	num-cs = <4>;
43	is-decoded-cs = <0>;
44	flash@0 {
45		compatible = "sst25wf080";
46		reg = <1>;
47		spi-max-frequency = <1000000>;
48		#address-cells = <1>;
49		#size-cells = <1>;
50		partition@test {
51			label = "spi-flash";
52			reg = <0x0 0x100000>;
53		};
54	};
55};
56
57&qspi {
58	status = "okay";
59};
60
61&can0 {
62	status = "okay";
63};
64
65&gem0 {
66	status = "okay";
67	phy-mode = "rgmii-id";
68	phy-handle = <&ethernet_phy>;
69
70	ethernet_phy: ethernet-phy@7 {
71		reg = <7>;
72	};
73};
74
75&i2c0 {
76	status = "okay";
77	clock-frequency = <400000>;
78
79	m24c02_eeprom@52 {
80		compatible = "at,24c02";
81		reg = <0x52>;
82	};
83
84};
85
86&sdhci0 {
87	status = "okay";
88};
89
90&uart1 {
91	u-boot,dm-pre-reloc;
92	status = "okay";
93};
94
95&usb0 {
96	status = "okay";
97	dr_mode = "host";
98	usb-phy = <&usb_phy0>;
99};
100