1/*
2 * Xilinx ZC770 XM010 board DTS
3 *
4 * Copyright (C) 2013 - 2015 Xilinx, Inc.
5 *
6 * SPDX-License-Identifier:	GPL-2.0+
7 */
8/dts-v1/;
9#include "zynq-7000.dtsi"
10
11/ {
12	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
13	model = "Xilinx Zynq";
14
15	aliases {
16		ethernet0 = &gem0;
17		i2c0 = &i2c0;
18		serial0 = &uart1;
19		spi0 = &qspi;
20		spi1 = &spi1;
21	};
22
23	chosen {
24		bootargs = "";
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory@0 {
29		device_type = "memory";
30		reg = <0x0 0x40000000>;
31	};
32
33	usb_phy0: phy0 {
34		compatible = "usb-nop-xceiv";
35		#phy-cells = <0>;
36	};
37};
38
39&can0 {
40	status = "okay";
41};
42
43&gem0 {
44	status = "okay";
45	phy-mode = "rgmii-id";
46	phy-handle = <&ethernet_phy>;
47
48	ethernet_phy: ethernet-phy@7 {
49		reg = <7>;
50		device_type = "ethernet-phy";
51	};
52};
53
54&i2c0 {
55	status = "okay";
56	clock-frequency = <400000>;
57
58	m24c02_eeprom@52 {
59		compatible = "at,24c02";
60		reg = <0x52>;
61	};
62
63};
64
65&qspi {
66	status = "okay";
67};
68
69&sdhci0 {
70	status = "okay";
71};
72
73&spi1 {
74	status = "okay";
75	num-cs = <4>;
76	is-decoded-cs = <0>;
77	flash@0 {
78		compatible = "sst25wf080";
79		reg = <1>;
80		spi-max-frequency = <1000000>;
81		#address-cells = <1>;
82		#size-cells = <1>;
83		partition@test {
84			label = "spi-flash";
85			reg = <0x0 0x100000>;
86		};
87	};
88};
89
90&uart1 {
91	u-boot,dm-pre-reloc;
92	status = "okay";
93};
94
95&usb0 {
96	status = "okay";
97	dr_mode = "host";
98	usb-phy = <&usb_phy0>;
99};
100