xref: /openbmc/u-boot/arch/arm/dts/zynq-zc702.dts (revision cc4f1558) 
1/*
2 * Xilinx ZC702 board DTS
3 *
4 *  Copyright (C) 2011 - 2015 Xilinx
5 *  Copyright (C) 2012 National Instruments Corp.
6 *
7 * SPDX-License-Identifier:	GPL-2.0+
8 */
9/dts-v1/;
10#include "zynq-7000.dtsi"
11
12/ {
13	model = "Zynq ZC702 Development Board";
14	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
15
16	aliases {
17		ethernet0 = &gem0;
18		i2c0 = &i2c0;
19		serial0 = &uart1;
20	};
21
22	memory {
23		device_type = "memory";
24		reg = <0x0 0x40000000>;
25	};
26
27	chosen {
28		bootargs = "earlyprintk";
29		stdout-path = "serial0:115200n8";
30	};
31
32	gpio-keys {
33		compatible = "gpio-keys";
34		#address-cells = <1>;
35		#size-cells = <0>;
36		autorepeat;
37		sw14 {
38			label = "sw14";
39			gpios = <&gpio0 12 0>;
40			linux,code = <108>; /* down */
41			gpio-key,wakeup;
42			autorepeat;
43		};
44		sw13 {
45			label = "sw13";
46			gpios = <&gpio0 14 0>;
47			linux,code = <103>; /* up */
48			gpio-key,wakeup;
49			autorepeat;
50		};
51	};
52
53	leds {
54		compatible = "gpio-leds";
55
56		ds23 {
57			label = "ds23";
58			gpios = <&gpio0 10 0>;
59			linux,default-trigger = "heartbeat";
60		};
61	};
62
63	usb_phy0: phy0 {
64		compatible = "usb-nop-xceiv";
65		#phy-cells = <0>;
66	};
67};
68
69&amba {
70	ocm: sram@fffc0000 {
71		compatible = "mmio-sram";
72		reg = <0xfffc0000 0x10000>;
73	};
74};
75
76&can0 {
77	status = "okay";
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_can0_default>;
80};
81
82&clkc {
83	ps-clk-frequency = <33333333>;
84};
85
86&gem0 {
87	status = "okay";
88	phy-mode = "rgmii-id";
89	phy-handle = <&ethernet_phy>;
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_gem0_default>;
92
93	ethernet_phy: ethernet-phy@7 {
94		reg = <7>;
95	};
96};
97
98&gpio0 {
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_gpio0_default>;
101};
102
103&i2c0 {
104	status = "okay";
105	clock-frequency = <400000>;
106	pinctrl-names = "default";
107	pinctrl-0 = <&pinctrl_i2c0_default>;
108
109	i2cswitch@74 {
110		compatible = "nxp,pca9548";
111		#address-cells = <1>;
112		#size-cells = <0>;
113		reg = <0x74>;
114
115		i2c@0 {
116			#address-cells = <1>;
117			#size-cells = <0>;
118			reg = <0>;
119			si570: clock-generator@5d {
120				#clock-cells = <0>;
121				compatible = "silabs,si570";
122				temperature-stability = <50>;
123				reg = <0x5d>;
124				factory-fout = <156250000>;
125				clock-frequency = <148500000>;
126			};
127		};
128
129		i2c@2 {
130			#address-cells = <1>;
131			#size-cells = <0>;
132			reg = <2>;
133			eeprom@54 {
134				compatible = "at,24c08";
135				reg = <0x54>;
136			};
137		};
138
139		i2c@3 {
140			#address-cells = <1>;
141			#size-cells = <0>;
142			reg = <3>;
143			gpio@21 {
144				compatible = "ti,tca6416";
145				reg = <0x21>;
146				gpio-controller;
147				#gpio-cells = <2>;
148			};
149		};
150
151		i2c@4 {
152			#address-cells = <1>;
153			#size-cells = <0>;
154			reg = <4>;
155			rtc@51 {
156				compatible = "nxp,pcf8563";
157				reg = <0x51>;
158			};
159		};
160
161		i2c@7 {
162			#address-cells = <1>;
163			#size-cells = <0>;
164			reg = <7>;
165			hwmon@52 {
166				compatible = "ti,ucd9248";
167				reg = <52>;
168			};
169			hwmon@53 {
170				compatible = "ti,ucd9248";
171				reg = <53>;
172			};
173			hwmon@54 {
174				compatible = "ti,ucd9248";
175				reg = <54>;
176			};
177		};
178	};
179};
180
181&pinctrl0 {
182	pinctrl_can0_default: can0-default {
183		mux {
184			function = "can0";
185			groups = "can0_9_grp";
186		};
187
188		conf {
189			groups = "can0_9_grp";
190			slew-rate = <0>;
191			io-standard = <1>;
192		};
193
194		conf-rx {
195			pins = "MIO46";
196			bias-high-impedance;
197		};
198
199		conf-tx {
200			pins = "MIO47";
201			bias-disable;
202		};
203	};
204
205	pinctrl_gem0_default: gem0-default {
206		mux {
207			function = "ethernet0";
208			groups = "ethernet0_0_grp";
209		};
210
211		conf {
212			groups = "ethernet0_0_grp";
213			slew-rate = <0>;
214			io-standard = <4>;
215		};
216
217		conf-rx {
218			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
219			bias-high-impedance;
220			low-power-disable;
221		};
222
223		conf-tx {
224			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
225			bias-disable;
226			low-power-enable;
227		};
228
229		mux-mdio {
230			function = "mdio0";
231			groups = "mdio0_0_grp";
232		};
233
234		conf-mdio {
235			groups = "mdio0_0_grp";
236			slew-rate = <0>;
237			io-standard = <1>;
238			bias-disable;
239		};
240	};
241
242	pinctrl_gpio0_default: gpio0-default {
243		mux {
244			function = "gpio0";
245			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
246				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
247				 "gpio0_13_grp", "gpio0_14_grp";
248		};
249
250		conf {
251			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
252				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
253				 "gpio0_13_grp", "gpio0_14_grp";
254			slew-rate = <0>;
255			io-standard = <1>;
256		};
257
258		conf-pull-up {
259			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
260			bias-pull-up;
261		};
262
263		conf-pull-none {
264			pins = "MIO7", "MIO8";
265			bias-disable;
266		};
267	};
268
269	pinctrl_i2c0_default: i2c0-default {
270		mux {
271			groups = "i2c0_10_grp";
272			function = "i2c0";
273		};
274
275		conf {
276			groups = "i2c0_10_grp";
277			bias-pull-up;
278			slew-rate = <0>;
279			io-standard = <1>;
280		};
281	};
282
283	pinctrl_sdhci0_default: sdhci0-default {
284		mux {
285			groups = "sdio0_2_grp";
286			function = "sdio0";
287		};
288
289		conf {
290			groups = "sdio0_2_grp";
291			slew-rate = <0>;
292			io-standard = <1>;
293			bias-disable;
294		};
295
296		mux-cd {
297			groups = "gpio0_0_grp";
298			function = "sdio0_cd";
299		};
300
301		conf-cd {
302			groups = "gpio0_0_grp";
303			bias-high-impedance;
304			bias-pull-up;
305			slew-rate = <0>;
306			io-standard = <1>;
307		};
308
309		mux-wp {
310			groups = "gpio0_15_grp";
311			function = "sdio0_wp";
312		};
313
314		conf-wp {
315			groups = "gpio0_15_grp";
316			bias-high-impedance;
317			bias-pull-up;
318			slew-rate = <0>;
319			io-standard = <1>;
320		};
321	};
322
323	pinctrl_uart1_default: uart1-default {
324		mux {
325			groups = "uart1_10_grp";
326			function = "uart1";
327		};
328
329		conf {
330			groups = "uart1_10_grp";
331			slew-rate = <0>;
332			io-standard = <1>;
333		};
334
335		conf-rx {
336			pins = "MIO49";
337			bias-high-impedance;
338		};
339
340		conf-tx {
341			pins = "MIO48";
342			bias-disable;
343		};
344	};
345
346	pinctrl_usb0_default: usb0-default {
347		mux {
348			groups = "usb0_0_grp";
349			function = "usb0";
350		};
351
352		conf {
353			groups = "usb0_0_grp";
354			slew-rate = <0>;
355			io-standard = <1>;
356		};
357
358		conf-rx {
359			pins = "MIO29", "MIO31", "MIO36";
360			bias-high-impedance;
361		};
362
363		conf-tx {
364			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
365			       "MIO35", "MIO37", "MIO38", "MIO39";
366			bias-disable;
367		};
368	};
369};
370
371&sdhci0 {
372	status = "okay";
373	pinctrl-names = "default";
374	pinctrl-0 = <&pinctrl_sdhci0_default>;
375};
376
377&uart1 {
378	status = "okay";
379	pinctrl-names = "default";
380	pinctrl-0 = <&pinctrl_uart1_default>;
381};
382
383&usb0 {
384	status = "okay";
385	dr_mode = "host";
386	usb-phy = <&usb_phy0>;
387	pinctrl-names = "default";
388	pinctrl-0 = <&pinctrl_usb0_default>;
389};
390