1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2011 - 2015 Xilinx 4 * Copyright (C) 2012 National Instruments Corp. 5 */ 6/dts-v1/; 7#include "zynq-7000.dtsi" 8 9/ { 10 model = "Xilinx ZC702 board"; 11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; 12 13 aliases { 14 ethernet0 = &gem0; 15 i2c0 = &i2c0; 16 serial0 = &uart1; 17 spi0 = &qspi; 18 mmc0 = &sdhci0; 19 }; 20 21 memory@0 { 22 device_type = "memory"; 23 reg = <0x0 0x40000000>; 24 }; 25 26 chosen { 27 bootargs = ""; 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 gpio-keys { 32 compatible = "gpio-keys"; 33 autorepeat; 34 sw14 { 35 label = "sw14"; 36 gpios = <&gpio0 12 0>; 37 linux,code = <108>; /* down */ 38 wakeup-source; 39 autorepeat; 40 }; 41 sw13 { 42 label = "sw13"; 43 gpios = <&gpio0 14 0>; 44 linux,code = <103>; /* up */ 45 wakeup-source; 46 autorepeat; 47 }; 48 }; 49 50 leds { 51 compatible = "gpio-leds"; 52 53 ds23 { 54 label = "ds23"; 55 gpios = <&gpio0 10 0>; 56 linux,default-trigger = "heartbeat"; 57 }; 58 }; 59 60 usb_phy0: phy0 { 61 compatible = "usb-nop-xceiv"; 62 #phy-cells = <0>; 63 }; 64}; 65 66&amba { 67 ocm: sram@fffc0000 { 68 compatible = "mmio-sram"; 69 reg = <0xfffc0000 0x10000>; 70 }; 71}; 72 73&can0 { 74 status = "okay"; 75 pinctrl-names = "default"; 76 pinctrl-0 = <&pinctrl_can0_default>; 77}; 78 79&clkc { 80 ps-clk-frequency = <33333333>; 81}; 82 83&gem0 { 84 status = "okay"; 85 phy-mode = "rgmii-id"; 86 phy-handle = <ðernet_phy>; 87 pinctrl-names = "default"; 88 pinctrl-0 = <&pinctrl_gem0_default>; 89 phy-reset-gpio = <&gpio0 11 0>; 90 phy-reset-active-low; 91 92 ethernet_phy: ethernet-phy@7 { 93 reg = <7>; 94 device_type = "ethernet-phy"; 95 }; 96}; 97 98&gpio0 { 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_gpio0_default>; 101}; 102 103&i2c0 { 104 status = "okay"; 105 clock-frequency = <400000>; 106 pinctrl-names = "default", "gpio"; 107 pinctrl-0 = <&pinctrl_i2c0_default>; 108 pinctrl-1 = <&pinctrl_i2c0_gpio>; 109 scl-gpios = <&gpio0 50 0>; 110 sda-gpios = <&gpio0 51 0>; 111 112 i2c-mux@74 { 113 compatible = "nxp,pca9548"; 114 #address-cells = <1>; 115 #size-cells = <0>; 116 reg = <0x74>; 117 118 i2c@0 { 119 #address-cells = <1>; 120 #size-cells = <0>; 121 reg = <0>; 122 si570: clock-generator@5d { 123 #clock-cells = <0>; 124 compatible = "silabs,si570"; 125 temperature-stability = <50>; 126 reg = <0x5d>; 127 factory-fout = <156250000>; 128 clock-frequency = <148500000>; 129 }; 130 }; 131 132 i2c@1 { 133 #address-cells = <1>; 134 #size-cells = <0>; 135 reg = <1>; 136 adv7511: hdmi-tx@39 { 137 compatible = "adi,adv7511"; 138 reg = <0x39>; 139 adi,input-depth = <8>; 140 adi,input-colorspace = "yuv422"; 141 adi,input-clock = "1x"; 142 adi,input-style = <3>; 143 adi,input-justification = "right"; 144 }; 145 }; 146 147 i2c@2 { 148 #address-cells = <1>; 149 #size-cells = <0>; 150 reg = <2>; 151 eeprom@54 { 152 compatible = "atmel,24c08"; 153 reg = <0x54>; 154 }; 155 }; 156 157 i2c@3 { 158 #address-cells = <1>; 159 #size-cells = <0>; 160 reg = <3>; 161 gpio@21 { 162 compatible = "ti,tca6416"; 163 reg = <0x21>; 164 gpio-controller; 165 #gpio-cells = <2>; 166 }; 167 }; 168 169 i2c@4 { 170 #address-cells = <1>; 171 #size-cells = <0>; 172 reg = <4>; 173 rtc@51 { 174 compatible = "nxp,pcf8563"; 175 reg = <0x51>; 176 }; 177 }; 178 179 i2c@7 { 180 #address-cells = <1>; 181 #size-cells = <0>; 182 reg = <7>; 183 hwmon@52 { 184 compatible = "ti,ucd9248"; 185 reg = <52>; 186 }; 187 hwmon@53 { 188 compatible = "ti,ucd9248"; 189 reg = <53>; 190 }; 191 hwmon@54 { 192 compatible = "ti,ucd9248"; 193 reg = <54>; 194 }; 195 }; 196 }; 197}; 198 199&pinctrl0 { 200 pinctrl_can0_default: can0-default { 201 mux { 202 function = "can0"; 203 groups = "can0_9_grp"; 204 }; 205 206 conf { 207 groups = "can0_9_grp"; 208 slew-rate = <0>; 209 io-standard = <1>; 210 }; 211 212 conf-rx { 213 pins = "MIO46"; 214 bias-high-impedance; 215 }; 216 217 conf-tx { 218 pins = "MIO47"; 219 bias-disable; 220 }; 221 }; 222 223 pinctrl_gem0_default: gem0-default { 224 mux { 225 function = "ethernet0"; 226 groups = "ethernet0_0_grp"; 227 }; 228 229 conf { 230 groups = "ethernet0_0_grp"; 231 slew-rate = <0>; 232 io-standard = <4>; 233 }; 234 235 conf-rx { 236 pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27"; 237 bias-high-impedance; 238 low-power-disable; 239 }; 240 241 conf-tx { 242 pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21"; 243 bias-disable; 244 low-power-enable; 245 }; 246 247 mux-mdio { 248 function = "mdio0"; 249 groups = "mdio0_0_grp"; 250 }; 251 252 conf-mdio { 253 groups = "mdio0_0_grp"; 254 slew-rate = <0>; 255 io-standard = <1>; 256 bias-disable; 257 }; 258 }; 259 260 pinctrl_gpio0_default: gpio0-default { 261 mux { 262 function = "gpio0"; 263 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", 264 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", 265 "gpio0_13_grp", "gpio0_14_grp"; 266 }; 267 268 conf { 269 groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp", 270 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp", 271 "gpio0_13_grp", "gpio0_14_grp"; 272 slew-rate = <0>; 273 io-standard = <1>; 274 }; 275 276 conf-pull-up { 277 pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14"; 278 bias-pull-up; 279 }; 280 281 conf-pull-none { 282 pins = "MIO7", "MIO8"; 283 bias-disable; 284 }; 285 }; 286 287 pinctrl_i2c0_default: i2c0-default { 288 mux { 289 groups = "i2c0_10_grp"; 290 function = "i2c0"; 291 }; 292 293 conf { 294 groups = "i2c0_10_grp"; 295 bias-pull-up; 296 slew-rate = <0>; 297 io-standard = <1>; 298 }; 299 }; 300 301 pinctrl_i2c0_gpio: i2c0-gpio { 302 mux { 303 groups = "gpio0_50_grp", "gpio0_51_grp"; 304 function = "gpio0"; 305 }; 306 307 conf { 308 groups = "gpio0_50_grp", "gpio0_51_grp"; 309 slew-rate = <0>; 310 io-standard = <1>; 311 }; 312 }; 313 314 pinctrl_sdhci0_default: sdhci0-default { 315 mux { 316 groups = "sdio0_2_grp"; 317 function = "sdio0"; 318 }; 319 320 conf { 321 groups = "sdio0_2_grp"; 322 slew-rate = <0>; 323 io-standard = <1>; 324 bias-disable; 325 }; 326 327 mux-cd { 328 groups = "gpio0_0_grp"; 329 function = "sdio0_cd"; 330 }; 331 332 conf-cd { 333 groups = "gpio0_0_grp"; 334 bias-high-impedance; 335 bias-pull-up; 336 slew-rate = <0>; 337 io-standard = <1>; 338 }; 339 340 mux-wp { 341 groups = "gpio0_15_grp"; 342 function = "sdio0_wp"; 343 }; 344 345 conf-wp { 346 groups = "gpio0_15_grp"; 347 bias-high-impedance; 348 bias-pull-up; 349 slew-rate = <0>; 350 io-standard = <1>; 351 }; 352 }; 353 354 pinctrl_uart1_default: uart1-default { 355 mux { 356 groups = "uart1_10_grp"; 357 function = "uart1"; 358 }; 359 360 conf { 361 groups = "uart1_10_grp"; 362 slew-rate = <0>; 363 io-standard = <1>; 364 }; 365 366 conf-rx { 367 pins = "MIO49"; 368 bias-high-impedance; 369 }; 370 371 conf-tx { 372 pins = "MIO48"; 373 bias-disable; 374 }; 375 }; 376 377 pinctrl_usb0_default: usb0-default { 378 mux { 379 groups = "usb0_0_grp"; 380 function = "usb0"; 381 }; 382 383 conf { 384 groups = "usb0_0_grp"; 385 slew-rate = <0>; 386 io-standard = <1>; 387 }; 388 389 conf-rx { 390 pins = "MIO29", "MIO31", "MIO36"; 391 bias-high-impedance; 392 }; 393 394 conf-tx { 395 pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", 396 "MIO35", "MIO37", "MIO38", "MIO39"; 397 bias-disable; 398 }; 399 }; 400}; 401 402&qspi { 403 u-boot,dm-pre-reloc; 404 status = "okay"; 405}; 406 407&sdhci0 { 408 u-boot,dm-pre-reloc; 409 status = "okay"; 410 pinctrl-names = "default"; 411 pinctrl-0 = <&pinctrl_sdhci0_default>; 412}; 413 414&uart1 { 415 u-boot,dm-pre-reloc; 416 status = "okay"; 417 pinctrl-names = "default"; 418 pinctrl-0 = <&pinctrl_uart1_default>; 419}; 420 421&usb0 { 422 status = "okay"; 423 dr_mode = "host"; 424 usb-phy = <&usb_phy0>; 425 pinctrl-names = "default"; 426 pinctrl-0 = <&pinctrl_usb0_default>; 427}; 428