1/* 2 * Xilinx Zynq 7000 DTSI 3 * Describes the hardware common to all Zynq 7000-based boards. 4 * 5 * Copyright (C) 2011 - 2015 Xilinx 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9/include/ "skeleton.dtsi" 10 11/ { 12 compatible = "xlnx,zynq-7000"; 13 14 cpus { 15 #address-cells = <1>; 16 #size-cells = <0>; 17 18 cpu@0 { 19 compatible = "arm,cortex-a9"; 20 device_type = "cpu"; 21 reg = <0>; 22 clocks = <&clkc 3>; 23 clock-latency = <1000>; 24 cpu0-supply = <®ulator_vccpint>; 25 operating-points = < 26 /* kHz uV */ 27 666667 1000000 28 333334 1000000 29 >; 30 }; 31 32 cpu@1 { 33 compatible = "arm,cortex-a9"; 34 device_type = "cpu"; 35 reg = <1>; 36 clocks = <&clkc 3>; 37 }; 38 }; 39 40 pmu { 41 compatible = "arm,cortex-a9-pmu"; 42 interrupts = <0 5 4>, <0 6 4>; 43 interrupt-parent = <&intc>; 44 reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; 45 }; 46 47 regulator_vccpint: fixedregulator@0 { 48 compatible = "regulator-fixed"; 49 regulator-name = "VCCPINT"; 50 regulator-min-microvolt = <1000000>; 51 regulator-max-microvolt = <1000000>; 52 regulator-boot-on; 53 regulator-always-on; 54 }; 55 56 amba: amba { 57 u-boot,dm-pre-reloc; 58 compatible = "simple-bus"; 59 #address-cells = <1>; 60 #size-cells = <1>; 61 interrupt-parent = <&intc>; 62 ranges; 63 64 adc: adc@f8007100 { 65 compatible = "xlnx,zynq-xadc-1.00.a"; 66 reg = <0xf8007100 0x20>; 67 interrupts = <0 7 4>; 68 interrupt-parent = <&intc>; 69 clocks = <&clkc 12>; 70 }; 71 72 can0: can@e0008000 { 73 compatible = "xlnx,zynq-can-1.0"; 74 status = "disabled"; 75 clocks = <&clkc 19>, <&clkc 36>; 76 clock-names = "can_clk", "pclk"; 77 reg = <0xe0008000 0x1000>; 78 interrupts = <0 28 4>; 79 interrupt-parent = <&intc>; 80 tx-fifo-depth = <0x40>; 81 rx-fifo-depth = <0x40>; 82 }; 83 84 can1: can@e0009000 { 85 compatible = "xlnx,zynq-can-1.0"; 86 status = "disabled"; 87 clocks = <&clkc 20>, <&clkc 37>; 88 clock-names = "can_clk", "pclk"; 89 reg = <0xe0009000 0x1000>; 90 interrupts = <0 51 4>; 91 interrupt-parent = <&intc>; 92 tx-fifo-depth = <0x40>; 93 rx-fifo-depth = <0x40>; 94 }; 95 96 gpio0: gpio@e000a000 { 97 compatible = "xlnx,zynq-gpio-1.0"; 98 #gpio-cells = <2>; 99 #interrupt-cells = <2>; 100 clocks = <&clkc 42>; 101 gpio-controller; 102 interrupt-controller; 103 interrupt-parent = <&intc>; 104 interrupts = <0 20 4>; 105 reg = <0xe000a000 0x1000>; 106 }; 107 108 i2c0: i2c@e0004000 { 109 compatible = "cdns,i2c-r1p10"; 110 status = "disabled"; 111 clocks = <&clkc 38>; 112 interrupt-parent = <&intc>; 113 interrupts = <0 25 4>; 114 reg = <0xe0004000 0x1000>; 115 #address-cells = <1>; 116 #size-cells = <0>; 117 }; 118 119 i2c1: i2c@e0005000 { 120 compatible = "cdns,i2c-r1p10"; 121 status = "disabled"; 122 clocks = <&clkc 39>; 123 interrupt-parent = <&intc>; 124 interrupts = <0 48 4>; 125 reg = <0xe0005000 0x1000>; 126 #address-cells = <1>; 127 #size-cells = <0>; 128 }; 129 130 intc: interrupt-controller@f8f01000 { 131 compatible = "arm,cortex-a9-gic"; 132 #interrupt-cells = <3>; 133 interrupt-controller; 134 reg = <0xF8F01000 0x1000>, 135 <0xF8F00100 0x100>; 136 }; 137 138 L2: cache-controller@f8f02000 { 139 compatible = "arm,pl310-cache"; 140 reg = <0xF8F02000 0x1000>; 141 interrupts = <0 2 4>; 142 arm,data-latency = <3 2 2>; 143 arm,tag-latency = <2 2 2>; 144 cache-unified; 145 cache-level = <2>; 146 }; 147 148 mc: memory-controller@f8006000 { 149 compatible = "xlnx,zynq-ddrc-a05"; 150 reg = <0xf8006000 0x1000>; 151 }; 152 153 uart0: serial@e0000000 { 154 compatible = "xlnx,xuartps", "cdns,uart-r1p8"; 155 status = "disabled"; 156 clocks = <&clkc 23>, <&clkc 40>; 157 clock-names = "uart_clk", "pclk"; 158 reg = <0xE0000000 0x1000>; 159 interrupts = <0 27 4>; 160 }; 161 162 uart1: serial@e0001000 { 163 compatible = "xlnx,xuartps", "cdns,uart-r1p8"; 164 status = "disabled"; 165 clocks = <&clkc 24>, <&clkc 41>; 166 clock-names = "uart_clk", "pclk"; 167 reg = <0xE0001000 0x1000>; 168 interrupts = <0 50 4>; 169 }; 170 171 spi0: spi@e0006000 { 172 compatible = "xlnx,zynq-spi-r1p6"; 173 reg = <0xe0006000 0x1000>; 174 status = "disabled"; 175 interrupt-parent = <&intc>; 176 interrupts = <0 26 4>; 177 clocks = <&clkc 25>, <&clkc 34>; 178 clock-names = "ref_clk", "pclk"; 179 spi-max-frequency = <166666700>; 180 #address-cells = <1>; 181 #size-cells = <0>; 182 }; 183 184 spi1: spi@e0007000 { 185 compatible = "xlnx,zynq-spi-r1p6"; 186 reg = <0xe0007000 0x1000>; 187 status = "disabled"; 188 interrupt-parent = <&intc>; 189 interrupts = <0 49 4>; 190 clocks = <&clkc 26>, <&clkc 35>; 191 clock-names = "ref_clk", "pclk"; 192 spi-max-frequency = <166666700>; 193 #address-cells = <1>; 194 #size-cells = <0>; 195 }; 196 197 qspi: spi@e000d000 { 198 clock-names = "ref_clk", "pclk"; 199 clocks = <&clkc 10>, <&clkc 43>; 200 compatible = "xlnx,zynq-qspi-1.0"; 201 status = "disabled"; 202 interrupt-parent = <&intc>; 203 interrupts = <0 19 4>; 204 reg = <0xe000d000 0x1000>; 205 #address-cells = <1>; 206 #size-cells = <0>; 207 }; 208 209 gem0: ethernet@e000b000 { 210 compatible = "cdns,zynq-gem", "cdns,gem"; 211 reg = <0xe000b000 0x1000>; 212 status = "disabled"; 213 interrupts = <0 22 4>; 214 clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; 215 clock-names = "pclk", "hclk", "tx_clk"; 216 #address-cells = <1>; 217 #size-cells = <0>; 218 }; 219 220 gem1: ethernet@e000c000 { 221 compatible = "cdns,zynq-gem", "cdns,gem"; 222 reg = <0xe000c000 0x1000>; 223 status = "disabled"; 224 interrupts = <0 45 4>; 225 clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; 226 clock-names = "pclk", "hclk", "tx_clk"; 227 #address-cells = <1>; 228 #size-cells = <0>; 229 }; 230 231 sdhci0: sdhci@e0100000 { 232 compatible = "arasan,sdhci-8.9a"; 233 status = "disabled"; 234 clock-names = "clk_xin", "clk_ahb"; 235 clocks = <&clkc 21>, <&clkc 32>; 236 interrupt-parent = <&intc>; 237 interrupts = <0 24 4>; 238 reg = <0xe0100000 0x1000>; 239 }; 240 241 sdhci1: sdhci@e0101000 { 242 compatible = "arasan,sdhci-8.9a"; 243 status = "disabled"; 244 clock-names = "clk_xin", "clk_ahb"; 245 clocks = <&clkc 22>, <&clkc 33>; 246 interrupt-parent = <&intc>; 247 interrupts = <0 47 4>; 248 reg = <0xe0101000 0x1000>; 249 }; 250 251 slcr: slcr@f8000000 { 252 #address-cells = <1>; 253 #size-cells = <1>; 254 compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; 255 reg = <0xF8000000 0x1000>; 256 ranges; 257 clkc: clkc@100 { 258 #clock-cells = <1>; 259 compatible = "xlnx,ps7-clkc"; 260 fclk-enable = <0>; 261 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", 262 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", 263 "dci", "lqspi", "smc", "pcap", "gem0", "gem1", 264 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", 265 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", 266 "dma", "usb0_aper", "usb1_aper", "gem0_aper", 267 "gem1_aper", "sdio0_aper", "sdio1_aper", 268 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", 269 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", 270 "gpio_aper", "lqspi_aper", "smc_aper", "swdt", 271 "dbg_trc", "dbg_apb"; 272 reg = <0x100 0x100>; 273 }; 274 275 rstc: rstc@200 { 276 compatible = "xlnx,zynq-reset"; 277 reg = <0x200 0x48>; 278 #reset-cells = <1>; 279 syscon = <&slcr>; 280 }; 281 282 pinctrl0: pinctrl@700 { 283 compatible = "xlnx,pinctrl-zynq"; 284 reg = <0x700 0x200>; 285 syscon = <&slcr>; 286 }; 287 }; 288 289 dmac_s: dmac@f8003000 { 290 compatible = "arm,pl330", "arm,primecell"; 291 reg = <0xf8003000 0x1000>; 292 interrupt-parent = <&intc>; 293 interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", 294 "dma4", "dma5", "dma6", "dma7"; 295 interrupts = <0 13 4>, 296 <0 14 4>, <0 15 4>, 297 <0 16 4>, <0 17 4>, 298 <0 40 4>, <0 41 4>, 299 <0 42 4>, <0 43 4>; 300 #dma-cells = <1>; 301 #dma-channels = <8>; 302 #dma-requests = <4>; 303 clocks = <&clkc 27>; 304 clock-names = "apb_pclk"; 305 }; 306 307 devcfg: devcfg@f8007000 { 308 compatible = "xlnx,zynq-devcfg-1.0"; 309 interrupt-parent = <&intc>; 310 interrupts = <0 8 4>; 311 reg = <0xf8007000 0x100>; 312 clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>; 313 clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3"; 314 syscon = <&slcr>; 315 }; 316 317 global_timer: timer@f8f00200 { 318 compatible = "arm,cortex-a9-global-timer"; 319 reg = <0xf8f00200 0x20>; 320 interrupts = <1 11 0x301>; 321 interrupt-parent = <&intc>; 322 clocks = <&clkc 4>; 323 }; 324 325 ttc0: timer@f8001000 { 326 interrupt-parent = <&intc>; 327 interrupts = <0 10 4>, <0 11 4>, <0 12 4>; 328 compatible = "cdns,ttc"; 329 clocks = <&clkc 6>; 330 reg = <0xF8001000 0x1000>; 331 }; 332 333 ttc1: timer@f8002000 { 334 interrupt-parent = <&intc>; 335 interrupts = <0 37 4>, <0 38 4>, <0 39 4>; 336 compatible = "cdns,ttc"; 337 clocks = <&clkc 6>; 338 reg = <0xF8002000 0x1000>; 339 }; 340 341 scutimer: timer@f8f00600 { 342 interrupt-parent = <&intc>; 343 interrupts = <1 13 0x301>; 344 compatible = "arm,cortex-a9-twd-timer"; 345 reg = <0xf8f00600 0x20>; 346 clocks = <&clkc 4>; 347 }; 348 349 usb0: usb@e0002000 { 350 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; 351 status = "disabled"; 352 clocks = <&clkc 28>; 353 interrupt-parent = <&intc>; 354 interrupts = <0 21 4>; 355 reg = <0xe0002000 0x1000>; 356 phy_type = "ulpi"; 357 }; 358 359 usb1: usb@e0003000 { 360 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2"; 361 status = "disabled"; 362 clocks = <&clkc 29>; 363 interrupt-parent = <&intc>; 364 interrupts = <0 44 4>; 365 reg = <0xe0003000 0x1000>; 366 phy_type = "ulpi"; 367 }; 368 369 watchdog0: watchdog@f8005000 { 370 clocks = <&clkc 45>; 371 compatible = "cdns,wdt-r1p2"; 372 interrupt-parent = <&intc>; 373 interrupts = <0 9 1>; 374 reg = <0xf8005000 0x1000>; 375 timeout-sec = <10>; 376 }; 377 }; 378}; 379