xref: /openbmc/u-boot/arch/arm/dts/uniphier-sld8.dtsi (revision 4c0411eb)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier sLD8 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/uniphier-gpio.h>
9
10/ {
11	compatible = "socionext,uniphier-sld8";
12	#address-cells = <1>;
13	#size-cells = <1>;
14
15	cpus {
16		#address-cells = <1>;
17		#size-cells = <0>;
18
19		cpu@0 {
20			device_type = "cpu";
21			compatible = "arm,cortex-a9";
22			reg = <0>;
23			enable-method = "psci";
24			next-level-cache = <&l2>;
25		};
26	};
27
28	psci {
29		compatible = "arm,psci-0.2";
30		method = "smc";
31	};
32
33	clocks {
34		refclk: ref {
35			compatible = "fixed-clock";
36			#clock-cells = <0>;
37			clock-frequency = <25000000>;
38		};
39
40		arm_timer_clk: arm-timer {
41			#clock-cells = <0>;
42			compatible = "fixed-clock";
43			clock-frequency = <50000000>;
44		};
45	};
46
47	soc {
48		compatible = "simple-bus";
49		#address-cells = <1>;
50		#size-cells = <1>;
51		ranges;
52		interrupt-parent = <&intc>;
53
54		l2: l2-cache@500c0000 {
55			compatible = "socionext,uniphier-system-cache";
56			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
57			      <0x506c0000 0x400>;
58			interrupts = <0 174 4>, <0 175 4>;
59			cache-unified;
60			cache-size = <(256 * 1024)>;
61			cache-sets = <256>;
62			cache-line-size = <128>;
63			cache-level = <2>;
64		};
65
66		serial0: serial@54006800 {
67			compatible = "socionext,uniphier-uart";
68			status = "disabled";
69			reg = <0x54006800 0x40>;
70			interrupts = <0 33 4>;
71			pinctrl-names = "default";
72			pinctrl-0 = <&pinctrl_uart0>;
73			clocks = <&peri_clk 0>;
74			resets = <&peri_rst 0>;
75		};
76
77		serial1: serial@54006900 {
78			compatible = "socionext,uniphier-uart";
79			status = "disabled";
80			reg = <0x54006900 0x40>;
81			interrupts = <0 35 4>;
82			pinctrl-names = "default";
83			pinctrl-0 = <&pinctrl_uart1>;
84			clocks = <&peri_clk 1>;
85			resets = <&peri_rst 1>;
86		};
87
88		serial2: serial@54006a00 {
89			compatible = "socionext,uniphier-uart";
90			status = "disabled";
91			reg = <0x54006a00 0x40>;
92			interrupts = <0 37 4>;
93			pinctrl-names = "default";
94			pinctrl-0 = <&pinctrl_uart2>;
95			clocks = <&peri_clk 2>;
96			resets = <&peri_rst 2>;
97		};
98
99		serial3: serial@54006b00 {
100			compatible = "socionext,uniphier-uart";
101			status = "disabled";
102			reg = <0x54006b00 0x40>;
103			interrupts = <0 29 4>;
104			pinctrl-names = "default";
105			pinctrl-0 = <&pinctrl_uart3>;
106			clocks = <&peri_clk 3>;
107			resets = <&peri_rst 3>;
108		};
109
110		gpio: gpio@55000000 {
111			compatible = "socionext,uniphier-gpio";
112			reg = <0x55000000 0x200>;
113			interrupt-parent = <&aidet>;
114			interrupt-controller;
115			#interrupt-cells = <2>;
116			gpio-controller;
117			#gpio-cells = <2>;
118			gpio-ranges = <&pinctrl 0 0 0>,
119				      <&pinctrl 104 0 0>,
120				      <&pinctrl 112 0 0>;
121			gpio-ranges-group-names = "gpio_range0",
122						  "gpio_range1",
123						  "gpio_range2";
124			ngpios = <136>;
125			socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
126		};
127
128		i2c0: i2c@58400000 {
129			compatible = "socionext,uniphier-i2c";
130			status = "disabled";
131			reg = <0x58400000 0x40>;
132			#address-cells = <1>;
133			#size-cells = <0>;
134			interrupts = <0 41 1>;
135			pinctrl-names = "default";
136			pinctrl-0 = <&pinctrl_i2c0>;
137			clocks = <&peri_clk 4>;
138			resets = <&peri_rst 4>;
139			clock-frequency = <100000>;
140		};
141
142		i2c1: i2c@58480000 {
143			compatible = "socionext,uniphier-i2c";
144			status = "disabled";
145			reg = <0x58480000 0x40>;
146			#address-cells = <1>;
147			#size-cells = <0>;
148			interrupts = <0 42 1>;
149			pinctrl-names = "default";
150			pinctrl-0 = <&pinctrl_i2c1>;
151			clocks = <&peri_clk 5>;
152			resets = <&peri_rst 5>;
153			clock-frequency = <100000>;
154		};
155
156		/* chip-internal connection for DMD */
157		i2c2: i2c@58500000 {
158			compatible = "socionext,uniphier-i2c";
159			reg = <0x58500000 0x40>;
160			#address-cells = <1>;
161			#size-cells = <0>;
162			interrupts = <0 43 1>;
163			pinctrl-names = "default";
164			pinctrl-0 = <&pinctrl_i2c2>;
165			clocks = <&peri_clk 6>;
166			resets = <&peri_rst 6>;
167			clock-frequency = <400000>;
168		};
169
170		i2c3: i2c@58580000 {
171			compatible = "socionext,uniphier-i2c";
172			status = "disabled";
173			reg = <0x58580000 0x40>;
174			#address-cells = <1>;
175			#size-cells = <0>;
176			interrupts = <0 44 1>;
177			pinctrl-names = "default";
178			pinctrl-0 = <&pinctrl_i2c3>;
179			clocks = <&peri_clk 7>;
180			resets = <&peri_rst 7>;
181			clock-frequency = <100000>;
182		};
183
184		system_bus: system-bus@58c00000 {
185			compatible = "socionext,uniphier-system-bus";
186			status = "disabled";
187			reg = <0x58c00000 0x400>;
188			#address-cells = <2>;
189			#size-cells = <1>;
190			pinctrl-names = "default";
191			pinctrl-0 = <&pinctrl_system_bus>;
192		};
193
194		smpctrl@59801000 {
195			compatible = "socionext,uniphier-smpctrl";
196			reg = <0x59801000 0x400>;
197		};
198
199		mioctrl@59810000 {
200			compatible = "socionext,uniphier-sld8-mioctrl",
201				     "simple-mfd", "syscon";
202			reg = <0x59810000 0x800>;
203
204			mio_clk: clock {
205				compatible = "socionext,uniphier-sld8-mio-clock";
206				#clock-cells = <1>;
207			};
208
209			mio_rst: reset {
210				compatible = "socionext,uniphier-sld8-mio-reset";
211				#reset-cells = <1>;
212			};
213		};
214
215		perictrl@59820000 {
216			compatible = "socionext,uniphier-sld8-perictrl",
217				     "simple-mfd", "syscon";
218			reg = <0x59820000 0x200>;
219
220			peri_clk: clock {
221				compatible = "socionext,uniphier-sld8-peri-clock";
222				#clock-cells = <1>;
223			};
224
225			peri_rst: reset {
226				compatible = "socionext,uniphier-sld8-peri-reset";
227				#reset-cells = <1>;
228			};
229		};
230
231		sd: sdhc@5a400000 {
232			compatible = "socionext,uniphier-sd-v2.91";
233			status = "disabled";
234			reg = <0x5a400000 0x200>;
235			interrupts = <0 76 4>;
236			pinctrl-names = "default", "uhs";
237			pinctrl-0 = <&pinctrl_sd>;
238			pinctrl-1 = <&pinctrl_sd_uhs>;
239			clocks = <&mio_clk 0>;
240			reset-names = "host", "bridge";
241			resets = <&mio_rst 0>, <&mio_rst 3>;
242			bus-width = <4>;
243			cap-sd-highspeed;
244			sd-uhs-sdr12;
245			sd-uhs-sdr25;
246			sd-uhs-sdr50;
247		};
248
249		emmc: sdhc@5a500000 {
250			compatible = "socionext,uniphier-sd-v2.91";
251			status = "disabled";
252			reg = <0x5a500000 0x200>;
253			interrupts = <0 78 4>;
254			pinctrl-names = "default";
255			pinctrl-0 = <&pinctrl_emmc>;
256			clocks = <&mio_clk 1>;
257			reset-names = "host", "bridge", "hw";
258			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
259			bus-width = <8>;
260			cap-mmc-highspeed;
261			cap-mmc-hw-reset;
262			non-removable;
263		};
264
265		usb0: usb@5a800100 {
266			compatible = "socionext,uniphier-ehci", "generic-ehci";
267			status = "disabled";
268			reg = <0x5a800100 0x100>;
269			interrupts = <0 80 4>;
270			pinctrl-names = "default";
271			pinctrl-0 = <&pinctrl_usb0>;
272			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
273				 <&mio_clk 12>;
274			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
275				 <&mio_rst 12>;
276			has-transaction-translator;
277		};
278
279		usb1: usb@5a810100 {
280			compatible = "socionext,uniphier-ehci", "generic-ehci";
281			status = "disabled";
282			reg = <0x5a810100 0x100>;
283			interrupts = <0 81 4>;
284			pinctrl-names = "default";
285			pinctrl-0 = <&pinctrl_usb1>;
286			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
287				 <&mio_clk 13>;
288			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
289				 <&mio_rst 13>;
290			has-transaction-translator;
291		};
292
293		usb2: usb@5a820100 {
294			compatible = "socionext,uniphier-ehci", "generic-ehci";
295			status = "disabled";
296			reg = <0x5a820100 0x100>;
297			interrupts = <0 82 4>;
298			pinctrl-names = "default";
299			pinctrl-0 = <&pinctrl_usb2>;
300			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
301				 <&mio_clk 14>;
302			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
303				 <&mio_rst 14>;
304			has-transaction-translator;
305		};
306
307		soc-glue@5f800000 {
308			compatible = "socionext,uniphier-sld8-soc-glue",
309				     "simple-mfd", "syscon";
310			reg = <0x5f800000 0x2000>;
311
312			pinctrl: pinctrl {
313				compatible = "socionext,uniphier-sld8-pinctrl";
314			};
315		};
316
317		soc-glue@5f900000 {
318			compatible = "socionext,uniphier-sld8-soc-glue-debug",
319				     "simple-mfd";
320			#address-cells = <1>;
321			#size-cells = <1>;
322			ranges = <0 0x5f900000 0x2000>;
323
324			efuse@100 {
325				compatible = "socionext,uniphier-efuse";
326				reg = <0x100 0x28>;
327			};
328
329			efuse@200 {
330				compatible = "socionext,uniphier-efuse";
331				reg = <0x200 0x14>;
332			};
333		};
334
335		timer@60000200 {
336			compatible = "arm,cortex-a9-global-timer";
337			reg = <0x60000200 0x20>;
338			interrupts = <1 11 0x104>;
339			clocks = <&arm_timer_clk>;
340		};
341
342		timer@60000600 {
343			compatible = "arm,cortex-a9-twd-timer";
344			reg = <0x60000600 0x20>;
345			interrupts = <1 13 0x104>;
346			clocks = <&arm_timer_clk>;
347		};
348
349		intc: interrupt-controller@60001000 {
350			compatible = "arm,cortex-a9-gic";
351			reg = <0x60001000 0x1000>,
352			      <0x60000100 0x100>;
353			#interrupt-cells = <3>;
354			interrupt-controller;
355		};
356
357		aidet: aidet@61830000 {
358			compatible = "socionext,uniphier-sld8-aidet";
359			reg = <0x61830000 0x200>;
360			interrupt-controller;
361			#interrupt-cells = <2>;
362		};
363
364		sysctrl@61840000 {
365			compatible = "socionext,uniphier-sld8-sysctrl",
366				     "simple-mfd", "syscon";
367			reg = <0x61840000 0x10000>;
368
369			sys_clk: clock {
370				compatible = "socionext,uniphier-sld8-clock";
371				#clock-cells = <1>;
372			};
373
374			sys_rst: reset {
375				compatible = "socionext,uniphier-sld8-reset";
376				#reset-cells = <1>;
377			};
378		};
379
380		nand: nand@68000000 {
381			compatible = "socionext,uniphier-denali-nand-v5a";
382			status = "disabled";
383			reg-names = "nand_data", "denali_reg";
384			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
385			interrupts = <0 65 4>;
386			pinctrl-names = "default";
387			pinctrl-0 = <&pinctrl_nand2cs>;
388			clocks = <&sys_clk 2>;
389			resets = <&sys_rst 2>;
390		};
391	};
392};
393
394#include "uniphier-pinctrl.dtsi"
395