xref: /openbmc/u-boot/arch/arm/dts/uniphier-pxs2.dtsi (revision 014a953c)
1/*
2 * Device Tree Source for UniPhier PXs2 SoC
3 *
4 * Copyright (C) 2015-2016 Socionext Inc.
5 *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6 *
7 * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 */
9
10#include <dt-bindings/gpio/uniphier-gpio.h>
11#include <dt-bindings/thermal/thermal.h>
12
13/ {
14	compatible = "socionext,uniphier-pxs2";
15	#address-cells = <1>;
16	#size-cells = <1>;
17
18	cpus {
19		#address-cells = <1>;
20		#size-cells = <0>;
21
22		cpu0: cpu@0 {
23			device_type = "cpu";
24			compatible = "arm,cortex-a9";
25			reg = <0>;
26			clocks = <&sys_clk 32>;
27			enable-method = "psci";
28			next-level-cache = <&l2>;
29			operating-points-v2 = <&cpu_opp>;
30			#cooling-cells = <2>;
31		};
32
33		cpu1: cpu@1 {
34			device_type = "cpu";
35			compatible = "arm,cortex-a9";
36			reg = <1>;
37			clocks = <&sys_clk 32>;
38			enable-method = "psci";
39			next-level-cache = <&l2>;
40			operating-points-v2 = <&cpu_opp>;
41		};
42
43		cpu2: cpu@2 {
44			device_type = "cpu";
45			compatible = "arm,cortex-a9";
46			reg = <2>;
47			clocks = <&sys_clk 32>;
48			enable-method = "psci";
49			next-level-cache = <&l2>;
50			operating-points-v2 = <&cpu_opp>;
51		};
52
53		cpu3: cpu@3 {
54			device_type = "cpu";
55			compatible = "arm,cortex-a9";
56			reg = <3>;
57			clocks = <&sys_clk 32>;
58			enable-method = "psci";
59			next-level-cache = <&l2>;
60			operating-points-v2 = <&cpu_opp>;
61		};
62	};
63
64	cpu_opp: opp-table {
65		compatible = "operating-points-v2";
66		opp-shared;
67
68		opp-100000000 {
69			opp-hz = /bits/ 64 <100000000>;
70			clock-latency-ns = <300>;
71		};
72		opp-150000000 {
73			opp-hz = /bits/ 64 <150000000>;
74			clock-latency-ns = <300>;
75		};
76		opp-200000000 {
77			opp-hz = /bits/ 64 <200000000>;
78			clock-latency-ns = <300>;
79		};
80		opp-300000000 {
81			opp-hz = /bits/ 64 <300000000>;
82			clock-latency-ns = <300>;
83		};
84		opp-400000000 {
85			opp-hz = /bits/ 64 <400000000>;
86			clock-latency-ns = <300>;
87		};
88		opp-600000000 {
89			opp-hz = /bits/ 64 <600000000>;
90			clock-latency-ns = <300>;
91		};
92		opp-800000000 {
93			opp-hz = /bits/ 64 <800000000>;
94			clock-latency-ns = <300>;
95		};
96		opp-1200000000 {
97			opp-hz = /bits/ 64 <1200000000>;
98			clock-latency-ns = <300>;
99		};
100	};
101
102	psci {
103		compatible = "arm,psci-0.2";
104		method = "smc";
105	};
106
107	clocks {
108		refclk: ref {
109			compatible = "fixed-clock";
110			#clock-cells = <0>;
111			clock-frequency = <25000000>;
112		};
113
114		arm_timer_clk: arm-timer {
115			#clock-cells = <0>;
116			compatible = "fixed-clock";
117			clock-frequency = <50000000>;
118		};
119	};
120
121	thermal-zones {
122		cpu-thermal {
123			polling-delay-passive = <250>;	/* 250ms */
124			polling-delay = <1000>;		/* 1000ms */
125			thermal-sensors = <&pvtctl>;
126
127			trips {
128				cpu_crit: cpu-crit {
129					temperature = <95000>;	/* 95C */
130					hysteresis = <2000>;
131					type = "critical";
132				};
133				cpu_alert: cpu-alert {
134					temperature = <85000>;	/* 85C */
135					hysteresis = <2000>;
136					type = "passive";
137				};
138			};
139
140			cooling-maps {
141				map {
142					trip = <&cpu_alert>;
143					cooling-device = <&cpu0
144					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
145				};
146			};
147		};
148	};
149
150	soc {
151		compatible = "simple-bus";
152		#address-cells = <1>;
153		#size-cells = <1>;
154		ranges;
155		interrupt-parent = <&intc>;
156
157		l2: l2-cache@500c0000 {
158			compatible = "socionext,uniphier-system-cache";
159			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
160			      <0x506c0000 0x400>;
161			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
162			cache-unified;
163			cache-size = <(1280 * 1024)>;
164			cache-sets = <512>;
165			cache-line-size = <128>;
166			cache-level = <2>;
167		};
168
169		serial0: serial@54006800 {
170			compatible = "socionext,uniphier-uart";
171			status = "disabled";
172			reg = <0x54006800 0x40>;
173			interrupts = <0 33 4>;
174			pinctrl-names = "default";
175			pinctrl-0 = <&pinctrl_uart0>;
176			clocks = <&peri_clk 0>;
177			clock-frequency = <88900000>;
178			resets = <&peri_rst 0>;
179		};
180
181		serial1: serial@54006900 {
182			compatible = "socionext,uniphier-uart";
183			status = "disabled";
184			reg = <0x54006900 0x40>;
185			interrupts = <0 35 4>;
186			pinctrl-names = "default";
187			pinctrl-0 = <&pinctrl_uart1>;
188			clocks = <&peri_clk 1>;
189			clock-frequency = <88900000>;
190			resets = <&peri_rst 1>;
191		};
192
193		serial2: serial@54006a00 {
194			compatible = "socionext,uniphier-uart";
195			status = "disabled";
196			reg = <0x54006a00 0x40>;
197			interrupts = <0 37 4>;
198			pinctrl-names = "default";
199			pinctrl-0 = <&pinctrl_uart2>;
200			clocks = <&peri_clk 2>;
201			clock-frequency = <88900000>;
202			resets = <&peri_rst 2>;
203		};
204
205		serial3: serial@54006b00 {
206			compatible = "socionext,uniphier-uart";
207			status = "disabled";
208			reg = <0x54006b00 0x40>;
209			interrupts = <0 177 4>;
210			pinctrl-names = "default";
211			pinctrl-0 = <&pinctrl_uart3>;
212			clocks = <&peri_clk 3>;
213			clock-frequency = <88900000>;
214			resets = <&peri_rst 3>;
215		};
216
217		gpio: gpio@55000000 {
218			compatible = "socionext,uniphier-gpio";
219			reg = <0x55000000 0x200>;
220			interrupt-parent = <&aidet>;
221			interrupt-controller;
222			#interrupt-cells = <2>;
223			gpio-controller;
224			#gpio-cells = <2>;
225			gpio-ranges = <&pinctrl 0 0 0>,
226				      <&pinctrl 96 0 0>;
227			gpio-ranges-group-names = "gpio_range0",
228						  "gpio_range1";
229			ngpios = <232>;
230			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
231						     <21 217 3>;
232		};
233
234		i2c0: i2c@58780000 {
235			compatible = "socionext,uniphier-fi2c";
236			status = "disabled";
237			reg = <0x58780000 0x80>;
238			#address-cells = <1>;
239			#size-cells = <0>;
240			interrupts = <0 41 4>;
241			pinctrl-names = "default";
242			pinctrl-0 = <&pinctrl_i2c0>;
243			clocks = <&peri_clk 4>;
244			resets = <&peri_rst 4>;
245			clock-frequency = <100000>;
246		};
247
248		i2c1: i2c@58781000 {
249			compatible = "socionext,uniphier-fi2c";
250			status = "disabled";
251			reg = <0x58781000 0x80>;
252			#address-cells = <1>;
253			#size-cells = <0>;
254			interrupts = <0 42 4>;
255			pinctrl-names = "default";
256			pinctrl-0 = <&pinctrl_i2c1>;
257			clocks = <&peri_clk 5>;
258			resets = <&peri_rst 5>;
259			clock-frequency = <100000>;
260		};
261
262		i2c2: i2c@58782000 {
263			compatible = "socionext,uniphier-fi2c";
264			status = "disabled";
265			reg = <0x58782000 0x80>;
266			#address-cells = <1>;
267			#size-cells = <0>;
268			interrupts = <0 43 4>;
269			pinctrl-names = "default";
270			pinctrl-0 = <&pinctrl_i2c2>;
271			clocks = <&peri_clk 6>;
272			resets = <&peri_rst 6>;
273			clock-frequency = <100000>;
274		};
275
276		i2c3: i2c@58783000 {
277			compatible = "socionext,uniphier-fi2c";
278			status = "disabled";
279			reg = <0x58783000 0x80>;
280			#address-cells = <1>;
281			#size-cells = <0>;
282			interrupts = <0 44 4>;
283			pinctrl-names = "default";
284			pinctrl-0 = <&pinctrl_i2c3>;
285			clocks = <&peri_clk 7>;
286			resets = <&peri_rst 7>;
287			clock-frequency = <100000>;
288		};
289
290		/* chip-internal connection for DMD */
291		i2c4: i2c@58784000 {
292			compatible = "socionext,uniphier-fi2c";
293			reg = <0x58784000 0x80>;
294			#address-cells = <1>;
295			#size-cells = <0>;
296			interrupts = <0 45 4>;
297			clocks = <&peri_clk 8>;
298			resets = <&peri_rst 8>;
299			clock-frequency = <400000>;
300		};
301
302		/* chip-internal connection for STM */
303		i2c5: i2c@58785000 {
304			compatible = "socionext,uniphier-fi2c";
305			reg = <0x58785000 0x80>;
306			#address-cells = <1>;
307			#size-cells = <0>;
308			interrupts = <0 25 4>;
309			clocks = <&peri_clk 9>;
310			resets = <&peri_rst 9>;
311			clock-frequency = <400000>;
312		};
313
314		/* chip-internal connection for HDMI */
315		i2c6: i2c@58786000 {
316			compatible = "socionext,uniphier-fi2c";
317			reg = <0x58786000 0x80>;
318			#address-cells = <1>;
319			#size-cells = <0>;
320			interrupts = <0 26 4>;
321			clocks = <&peri_clk 10>;
322			resets = <&peri_rst 10>;
323			clock-frequency = <400000>;
324		};
325
326		system_bus: system-bus@58c00000 {
327			compatible = "socionext,uniphier-system-bus";
328			status = "disabled";
329			reg = <0x58c00000 0x400>;
330			#address-cells = <2>;
331			#size-cells = <1>;
332			pinctrl-names = "default";
333			pinctrl-0 = <&pinctrl_system_bus>;
334		};
335
336		smpctrl@59801000 {
337			compatible = "socionext,uniphier-smpctrl";
338			reg = <0x59801000 0x400>;
339		};
340
341		sdctrl@59810000 {
342			compatible = "socionext,uniphier-pxs2-sdctrl",
343				     "simple-mfd", "syscon";
344			reg = <0x59810000 0x400>;
345
346			sd_clk: clock {
347				compatible = "socionext,uniphier-pxs2-sd-clock";
348				#clock-cells = <1>;
349			};
350
351			sd_rst: reset {
352				compatible = "socionext,uniphier-pxs2-sd-reset";
353				#reset-cells = <1>;
354			};
355		};
356
357		perictrl@59820000 {
358			compatible = "socionext,uniphier-pxs2-perictrl",
359				     "simple-mfd", "syscon";
360			reg = <0x59820000 0x200>;
361
362			peri_clk: clock {
363				compatible = "socionext,uniphier-pxs2-peri-clock";
364				#clock-cells = <1>;
365			};
366
367			peri_rst: reset {
368				compatible = "socionext,uniphier-pxs2-peri-reset";
369				#reset-cells = <1>;
370			};
371		};
372
373		emmc: sdhc@5a000000 {
374			compatible = "socionext,uniphier-sdhc";
375			status = "disabled";
376			reg = <0x5a000000 0x800>;
377			interrupts = <0 78 4>;
378			pinctrl-names = "default";
379			pinctrl-0 = <&pinctrl_emmc>;
380			clocks = <&sd_clk 1>;
381			reset-names = "host";
382			resets = <&sd_rst 1>;
383			bus-width = <8>;
384			non-removable;
385			cap-mmc-highspeed;
386			cap-mmc-hw-reset;
387			no-3-3-v;
388		};
389
390		sd: sdhc@5a400000 {
391			compatible = "socionext,uniphier-sdhc";
392			status = "disabled";
393			reg = <0x5a400000 0x800>;
394			interrupts = <0 76 4>;
395			pinctrl-names = "default", "1.8v";
396			pinctrl-0 = <&pinctrl_sd>;
397			pinctrl-1 = <&pinctrl_sd_1v8>;
398			clocks = <&sd_clk 0>;
399			reset-names = "host";
400			resets = <&sd_rst 0>;
401			bus-width = <4>;
402			cap-sd-highspeed;
403			sd-uhs-sdr12;
404			sd-uhs-sdr25;
405			sd-uhs-sdr50;
406		};
407
408		soc-glue@5f800000 {
409			compatible = "socionext,uniphier-pxs2-soc-glue",
410				     "simple-mfd", "syscon";
411			reg = <0x5f800000 0x2000>;
412
413			pinctrl: pinctrl {
414				compatible = "socionext,uniphier-pxs2-pinctrl";
415			};
416		};
417
418		aidet: aidet@5fc20000 {
419			compatible = "socionext,uniphier-pxs2-aidet";
420			reg = <0x5fc20000 0x200>;
421			interrupt-controller;
422			#interrupt-cells = <2>;
423		};
424
425		timer@60000200 {
426			compatible = "arm,cortex-a9-global-timer";
427			reg = <0x60000200 0x20>;
428			interrupts = <1 11 0xf04>;
429			clocks = <&arm_timer_clk>;
430		};
431
432		timer@60000600 {
433			compatible = "arm,cortex-a9-twd-timer";
434			reg = <0x60000600 0x20>;
435			interrupts = <1 13 0xf04>;
436			clocks = <&arm_timer_clk>;
437		};
438
439		intc: interrupt-controller@60001000 {
440			compatible = "arm,cortex-a9-gic";
441			reg = <0x60001000 0x1000>,
442			      <0x60000100 0x100>;
443			#interrupt-cells = <3>;
444			interrupt-controller;
445		};
446
447		sysctrl@61840000 {
448			compatible = "socionext,uniphier-pxs2-sysctrl",
449				     "simple-mfd", "syscon";
450			reg = <0x61840000 0x10000>;
451
452			sys_clk: clock {
453				compatible = "socionext,uniphier-pxs2-clock";
454				#clock-cells = <1>;
455			};
456
457			sys_rst: reset {
458				compatible = "socionext,uniphier-pxs2-reset";
459				#reset-cells = <1>;
460			};
461
462			pvtctl: pvtctl {
463				compatible = "socionext,uniphier-pxs2-thermal";
464				interrupts = <0 3 4>;
465				#thermal-sensor-cells = <0>;
466				socionext,tmod-calibration = <0x0f86 0x6844>;
467			};
468		};
469
470		usb0: usb@65b00000 {
471			compatible = "socionext,uniphier-pxs2-dwc3";
472			status = "disabled";
473			reg = <0x65b00000 0x1000>;
474			#address-cells = <1>;
475			#size-cells = <1>;
476			ranges;
477			pinctrl-names = "default";
478			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
479			dwc3@65a00000 {
480				compatible = "snps,dwc3";
481				reg = <0x65a00000 0x10000>;
482				interrupts = <0 134 4>;
483				dr_mode = "host";
484				tx-fifo-resize;
485			};
486		};
487
488		usb1: usb@65d00000 {
489			compatible = "socionext,uniphier-pxs2-dwc3";
490			status = "disabled";
491			reg = <0x65d00000 0x1000>;
492			#address-cells = <1>;
493			#size-cells = <1>;
494			ranges;
495			pinctrl-names = "default";
496			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
497			dwc3@65c00000 {
498				compatible = "snps,dwc3";
499				reg = <0x65c00000 0x10000>;
500				interrupts = <0 137 4>;
501				dr_mode = "host";
502				tx-fifo-resize;
503			};
504		};
505
506		nand: nand@68000000 {
507			compatible = "socionext,uniphier-denali-nand-v5b";
508			status = "disabled";
509			reg-names = "nand_data", "denali_reg";
510			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
511			interrupts = <0 65 4>;
512			pinctrl-names = "default";
513			pinctrl-0 = <&pinctrl_nand2cs>;
514			clocks = <&sys_clk 2>;
515			resets = <&sys_rst 2>;
516		};
517	};
518};
519
520#include "uniphier-pinctrl.dtsi"
521