xref: /openbmc/u-boot/arch/arm/dts/uniphier-ld20.dtsi (revision d3c083a9)
1/*
2 * Device Tree Source for UniPhier LD20 SoC
3 *
4 * Copyright (C) 2015-2016 Socionext Inc.
5 *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6 *
7 * SPDX-License-Identifier:	GPL-2.0+	X11
8 */
9
10/memreserve/ 0x80000000 0x00080000;
11
12/ {
13	compatible = "socionext,uniphier-ld20";
14	#address-cells = <2>;
15	#size-cells = <2>;
16	interrupt-parent = <&gic>;
17
18	cpus {
19		#address-cells = <2>;
20		#size-cells = <0>;
21
22		cpu-map {
23			cluster0 {
24				core0 {
25					cpu = <&cpu0>;
26				};
27				core1 {
28					cpu = <&cpu1>;
29				};
30			};
31
32			cluster1 {
33				core0 {
34					cpu = <&cpu2>;
35				};
36				core1 {
37					cpu = <&cpu3>;
38				};
39			};
40		};
41
42		cpu0: cpu@0 {
43			device_type = "cpu";
44			compatible = "arm,cortex-a72", "arm,armv8";
45			reg = <0 0x000>;
46			clocks = <&sys_clk 32>;
47			enable-method = "psci";
48			operating-points-v2 = <&cluster0_opp>;
49		};
50
51		cpu1: cpu@1 {
52			device_type = "cpu";
53			compatible = "arm,cortex-a72", "arm,armv8";
54			reg = <0 0x001>;
55			clocks = <&sys_clk 32>;
56			enable-method = "psci";
57			operating-points-v2 = <&cluster0_opp>;
58		};
59
60		cpu2: cpu@100 {
61			device_type = "cpu";
62			compatible = "arm,cortex-a53", "arm,armv8";
63			reg = <0 0x100>;
64			clocks = <&sys_clk 33>;
65			enable-method = "psci";
66			operating-points-v2 = <&cluster1_opp>;
67		};
68
69		cpu3: cpu@101 {
70			device_type = "cpu";
71			compatible = "arm,cortex-a53", "arm,armv8";
72			reg = <0 0x101>;
73			clocks = <&sys_clk 33>;
74			enable-method = "psci";
75			operating-points-v2 = <&cluster1_opp>;
76		};
77	};
78
79	cluster0_opp: opp_table0 {
80		compatible = "operating-points-v2";
81		opp-shared;
82
83		opp@250000000 {
84			opp-hz = /bits/ 64 <250000000>;
85			clock-latency-ns = <300>;
86		};
87		opp@275000000 {
88			opp-hz = /bits/ 64 <275000000>;
89			clock-latency-ns = <300>;
90		};
91		opp@500000000 {
92			opp-hz = /bits/ 64 <500000000>;
93			clock-latency-ns = <300>;
94		};
95		opp@550000000 {
96			opp-hz = /bits/ 64 <550000000>;
97			clock-latency-ns = <300>;
98		};
99		opp@666667000 {
100			opp-hz = /bits/ 64 <666667000>;
101			clock-latency-ns = <300>;
102		};
103		opp@733334000 {
104			opp-hz = /bits/ 64 <733334000>;
105			clock-latency-ns = <300>;
106		};
107		opp@1000000000 {
108			opp-hz = /bits/ 64 <1000000000>;
109			clock-latency-ns = <300>;
110		};
111		opp@1100000000 {
112			opp-hz = /bits/ 64 <1100000000>;
113			clock-latency-ns = <300>;
114		};
115	};
116
117	cluster1_opp: opp_table1 {
118		compatible = "operating-points-v2";
119		opp-shared;
120
121		opp@250000000 {
122			opp-hz = /bits/ 64 <250000000>;
123			clock-latency-ns = <300>;
124		};
125		opp@275000000 {
126			opp-hz = /bits/ 64 <275000000>;
127			clock-latency-ns = <300>;
128		};
129		opp@500000000 {
130			opp-hz = /bits/ 64 <500000000>;
131			clock-latency-ns = <300>;
132		};
133		opp@550000000 {
134			opp-hz = /bits/ 64 <550000000>;
135			clock-latency-ns = <300>;
136		};
137		opp@666667000 {
138			opp-hz = /bits/ 64 <666667000>;
139			clock-latency-ns = <300>;
140		};
141		opp@733334000 {
142			opp-hz = /bits/ 64 <733334000>;
143			clock-latency-ns = <300>;
144		};
145		opp@1000000000 {
146			opp-hz = /bits/ 64 <1000000000>;
147			clock-latency-ns = <300>;
148		};
149		opp@1100000000 {
150			opp-hz = /bits/ 64 <1100000000>;
151			clock-latency-ns = <300>;
152		};
153	};
154
155	psci {
156		compatible = "arm,psci-1.0";
157		method = "smc";
158	};
159
160	clocks {
161		refclk: ref {
162			compatible = "fixed-clock";
163			#clock-cells = <0>;
164			clock-frequency = <25000000>;
165		};
166	};
167
168	timer {
169		compatible = "arm,armv8-timer";
170		interrupts = <1 13 4>,
171			     <1 14 4>,
172			     <1 11 4>,
173			     <1 10 4>;
174	};
175
176	soc {
177		compatible = "simple-bus";
178		#address-cells = <1>;
179		#size-cells = <1>;
180		ranges = <0 0 0 0xffffffff>;
181		u-boot,dm-pre-reloc;
182
183		serial0: serial@54006800 {
184			compatible = "socionext,uniphier-uart";
185			status = "disabled";
186			reg = <0x54006800 0x40>;
187			interrupts = <0 33 4>;
188			pinctrl-names = "default";
189			pinctrl-0 = <&pinctrl_uart0>;
190			clocks = <&peri_clk 0>;
191			clock-frequency = <58820000>;
192		};
193
194		serial1: serial@54006900 {
195			compatible = "socionext,uniphier-uart";
196			status = "disabled";
197			reg = <0x54006900 0x40>;
198			interrupts = <0 35 4>;
199			pinctrl-names = "default";
200			pinctrl-0 = <&pinctrl_uart1>;
201			clocks = <&peri_clk 1>;
202			clock-frequency = <58820000>;
203		};
204
205		serial2: serial@54006a00 {
206			compatible = "socionext,uniphier-uart";
207			status = "disabled";
208			reg = <0x54006a00 0x40>;
209			interrupts = <0 37 4>;
210			pinctrl-names = "default";
211			pinctrl-0 = <&pinctrl_uart2>;
212			clocks = <&peri_clk 2>;
213			clock-frequency = <58820000>;
214		};
215
216		serial3: serial@54006b00 {
217			compatible = "socionext,uniphier-uart";
218			status = "disabled";
219			reg = <0x54006b00 0x40>;
220			interrupts = <0 177 4>;
221			pinctrl-names = "default";
222			pinctrl-0 = <&pinctrl_uart3>;
223			clocks = <&peri_clk 3>;
224			clock-frequency = <58820000>;
225		};
226
227		i2c0: i2c@58780000 {
228			compatible = "socionext,uniphier-fi2c";
229			status = "disabled";
230			reg = <0x58780000 0x80>;
231			#address-cells = <1>;
232			#size-cells = <0>;
233			interrupts = <0 41 4>;
234			pinctrl-names = "default";
235			pinctrl-0 = <&pinctrl_i2c0>;
236			clocks = <&peri_clk 4>;
237			clock-frequency = <100000>;
238		};
239
240		i2c1: i2c@58781000 {
241			compatible = "socionext,uniphier-fi2c";
242			status = "disabled";
243			reg = <0x58781000 0x80>;
244			#address-cells = <1>;
245			#size-cells = <0>;
246			interrupts = <0 42 4>;
247			pinctrl-names = "default";
248			pinctrl-0 = <&pinctrl_i2c1>;
249			clocks = <&peri_clk 5>;
250			clock-frequency = <100000>;
251		};
252
253		i2c2: i2c@58782000 {
254			compatible = "socionext,uniphier-fi2c";
255			reg = <0x58782000 0x80>;
256			#address-cells = <1>;
257			#size-cells = <0>;
258			interrupts = <0 43 4>;
259			clocks = <&peri_clk 6>;
260			clock-frequency = <400000>;
261		};
262
263		i2c3: i2c@58783000 {
264			compatible = "socionext,uniphier-fi2c";
265			status = "disabled";
266			reg = <0x58783000 0x80>;
267			#address-cells = <1>;
268			#size-cells = <0>;
269			interrupts = <0 44 4>;
270			pinctrl-names = "default";
271			pinctrl-0 = <&pinctrl_i2c3>;
272			clocks = <&peri_clk 7>;
273			clock-frequency = <100000>;
274		};
275
276		i2c4: i2c@58784000 {
277			compatible = "socionext,uniphier-fi2c";
278			status = "disabled";
279			reg = <0x58784000 0x80>;
280			#address-cells = <1>;
281			#size-cells = <0>;
282			interrupts = <0 45 4>;
283			pinctrl-names = "default";
284			pinctrl-0 = <&pinctrl_i2c4>;
285			clocks = <&peri_clk 8>;
286			clock-frequency = <100000>;
287		};
288
289		i2c5: i2c@58785000 {
290			compatible = "socionext,uniphier-fi2c";
291			reg = <0x58785000 0x80>;
292			#address-cells = <1>;
293			#size-cells = <0>;
294			interrupts = <0 25 4>;
295			clocks = <&peri_clk 9>;
296			clock-frequency = <400000>;
297		};
298
299		system_bus: system-bus@58c00000 {
300			compatible = "socionext,uniphier-system-bus";
301			status = "disabled";
302			reg = <0x58c00000 0x400>;
303			#address-cells = <2>;
304			#size-cells = <1>;
305			pinctrl-names = "default";
306			pinctrl-0 = <&pinctrl_system_bus>;
307		};
308
309		smpctrl@59800000 {
310			compatible = "socionext,uniphier-smpctrl";
311			reg = <0x59801000 0x400>;
312		};
313
314		sdctrl@59810000 {
315			compatible = "socionext,uniphier-ld20-sdctrl",
316				     "simple-mfd", "syscon";
317			reg = <0x59810000 0x800>;
318
319			sd_clk: clock {
320				compatible = "socionext,uniphier-ld20-sd-clock";
321				#clock-cells = <1>;
322			};
323
324			sd_rst: reset {
325				compatible = "socionext,uniphier-ld20-sd-reset";
326				#reset-cells = <1>;
327			};
328		};
329
330		perictrl@59820000 {
331			compatible = "socionext,uniphier-ld20-perictrl",
332				     "simple-mfd", "syscon";
333			reg = <0x59820000 0x200>;
334
335			peri_clk: clock {
336				compatible = "socionext,uniphier-ld20-peri-clock";
337				#clock-cells = <1>;
338			};
339
340			peri_rst: reset {
341				compatible = "socionext,uniphier-ld20-peri-reset";
342				#reset-cells = <1>;
343			};
344		};
345
346		emmc: sdhc@5a000000 {
347			compatible = "cdns,sd4hc";
348			reg = <0x5a000000 0x400>;
349			interrupts = <0 78 4>;
350			pinctrl-names = "default";
351			pinctrl-0 = <&pinctrl_emmc_1v8>;
352			clocks = <&sys_clk 4>;
353			bus-width = <8>;
354			mmc-ddr-1_8v;
355			mmc-hs200-1_8v;
356			/* mmc-hs400-1_8v; support depends on board design */
357		};
358
359		sd: sdhc@5a400000 {
360			compatible = "socionext,uniphier-sdhc";
361			status = "disabled";
362			reg = <0x5a400000 0x800>;
363			interrupts = <0 76 4>;
364			pinctrl-names = "default";
365			pinctrl-0 = <&pinctrl_sd>;
366			clocks = <&sd_clk 0>;
367			reset-names = "host";
368			resets = <&sd_rst 0>;
369			bus-width = <4>;
370			cap-sd-highspeed;
371		};
372
373		soc-glue@5f800000 {
374			compatible = "socionext,uniphier-ld20-soc-glue",
375				     "simple-mfd", "syscon";
376			reg = <0x5f800000 0x2000>;
377			u-boot,dm-pre-reloc;
378
379			pinctrl: pinctrl {
380				compatible = "socionext,uniphier-ld20-pinctrl";
381				u-boot,dm-pre-reloc;
382			};
383		};
384
385		aidet@5fc20000 {
386			compatible = "simple-mfd", "syscon";
387			reg = <0x5fc20000 0x200>;
388		};
389
390		gic: interrupt-controller@5fe00000 {
391			compatible = "arm,gic-v3";
392			reg = <0x5fe00000 0x10000>,	/* GICD */
393			      <0x5fe80000 0x80000>;	/* GICR */
394			interrupt-controller;
395			#interrupt-cells = <3>;
396			interrupts = <1 9 4>;
397		};
398
399		sysctrl@61840000 {
400			compatible = "socionext,uniphier-ld20-sysctrl",
401				     "simple-mfd", "syscon";
402			reg = <0x61840000 0x10000>;
403
404			sys_clk: clock {
405				compatible = "socionext,uniphier-ld20-clock";
406				#clock-cells = <1>;
407			};
408
409			sys_rst: reset {
410				compatible = "socionext,uniphier-ld20-reset";
411				#reset-cells = <1>;
412			};
413		};
414
415		usb: usb@65b00000 {
416			compatible = "socionext,uniphier-ld20-dwc3";
417			reg = <0x65b00000 0x1000>;
418			#address-cells = <1>;
419			#size-cells = <1>;
420			ranges;
421			pinctrl-names = "default";
422			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
423				    <&pinctrl_usb2>, <&pinctrl_usb3>;
424			dwc3@65a00000 {
425				compatible = "snps,dwc3";
426				reg = <0x65a00000 0x10000>;
427				interrupts = <0 134 4>;
428				tx-fifo-resize;
429			};
430		};
431
432		nand: nand@68000000 {
433			compatible = "socionext,denali-nand-v5b";
434			status = "disabled";
435			reg-names = "nand_data", "denali_reg";
436			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
437			interrupts = <0 65 4>;
438			pinctrl-names = "default";
439			pinctrl-0 = <&pinctrl_nand>;
440			clocks = <&sys_clk 2>;
441			nand-ecc-strength = <8>;
442		};
443	};
444};
445
446/include/ "uniphier-pinctrl.dtsi"
447