xref: /openbmc/u-boot/arch/arm/dts/uniphier-ld20.dtsi (revision ad97051b)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier LD20 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/gpio/uniphier-gpio.h>
10#include <dt-bindings/thermal/thermal.h>
11
12/memreserve/ 0x80000000 0x02000000;
13
14/ {
15	compatible = "socionext,uniphier-ld20";
16	#address-cells = <2>;
17	#size-cells = <2>;
18	interrupt-parent = <&gic>;
19
20	cpus {
21		#address-cells = <2>;
22		#size-cells = <0>;
23
24		cpu-map {
25			cluster0 {
26				core0 {
27					cpu = <&cpu0>;
28				};
29				core1 {
30					cpu = <&cpu1>;
31				};
32			};
33
34			cluster1 {
35				core0 {
36					cpu = <&cpu2>;
37				};
38				core1 {
39					cpu = <&cpu3>;
40				};
41			};
42		};
43
44		cpu0: cpu@0 {
45			device_type = "cpu";
46			compatible = "arm,cortex-a72", "arm,armv8";
47			reg = <0 0x000>;
48			clocks = <&sys_clk 32>;
49			enable-method = "psci";
50			operating-points-v2 = <&cluster0_opp>;
51			#cooling-cells = <2>;
52		};
53
54		cpu1: cpu@1 {
55			device_type = "cpu";
56			compatible = "arm,cortex-a72", "arm,armv8";
57			reg = <0 0x001>;
58			clocks = <&sys_clk 32>;
59			enable-method = "psci";
60			operating-points-v2 = <&cluster0_opp>;
61		};
62
63		cpu2: cpu@100 {
64			device_type = "cpu";
65			compatible = "arm,cortex-a53", "arm,armv8";
66			reg = <0 0x100>;
67			clocks = <&sys_clk 33>;
68			enable-method = "psci";
69			operating-points-v2 = <&cluster1_opp>;
70			#cooling-cells = <2>;
71		};
72
73		cpu3: cpu@101 {
74			device_type = "cpu";
75			compatible = "arm,cortex-a53", "arm,armv8";
76			reg = <0 0x101>;
77			clocks = <&sys_clk 33>;
78			enable-method = "psci";
79			operating-points-v2 = <&cluster1_opp>;
80		};
81	};
82
83	cluster0_opp: opp-table0 {
84		compatible = "operating-points-v2";
85		opp-shared;
86
87		opp-250000000 {
88			opp-hz = /bits/ 64 <250000000>;
89			clock-latency-ns = <300>;
90		};
91		opp-275000000 {
92			opp-hz = /bits/ 64 <275000000>;
93			clock-latency-ns = <300>;
94		};
95		opp-500000000 {
96			opp-hz = /bits/ 64 <500000000>;
97			clock-latency-ns = <300>;
98		};
99		opp-550000000 {
100			opp-hz = /bits/ 64 <550000000>;
101			clock-latency-ns = <300>;
102		};
103		opp-666667000 {
104			opp-hz = /bits/ 64 <666667000>;
105			clock-latency-ns = <300>;
106		};
107		opp-733334000 {
108			opp-hz = /bits/ 64 <733334000>;
109			clock-latency-ns = <300>;
110		};
111		opp-1000000000 {
112			opp-hz = /bits/ 64 <1000000000>;
113			clock-latency-ns = <300>;
114		};
115		opp-1100000000 {
116			opp-hz = /bits/ 64 <1100000000>;
117			clock-latency-ns = <300>;
118		};
119	};
120
121	cluster1_opp: opp-table1 {
122		compatible = "operating-points-v2";
123		opp-shared;
124
125		opp-250000000 {
126			opp-hz = /bits/ 64 <250000000>;
127			clock-latency-ns = <300>;
128		};
129		opp-275000000 {
130			opp-hz = /bits/ 64 <275000000>;
131			clock-latency-ns = <300>;
132		};
133		opp-500000000 {
134			opp-hz = /bits/ 64 <500000000>;
135			clock-latency-ns = <300>;
136		};
137		opp-550000000 {
138			opp-hz = /bits/ 64 <550000000>;
139			clock-latency-ns = <300>;
140		};
141		opp-666667000 {
142			opp-hz = /bits/ 64 <666667000>;
143			clock-latency-ns = <300>;
144		};
145		opp-733334000 {
146			opp-hz = /bits/ 64 <733334000>;
147			clock-latency-ns = <300>;
148		};
149		opp-1000000000 {
150			opp-hz = /bits/ 64 <1000000000>;
151			clock-latency-ns = <300>;
152		};
153		opp-1100000000 {
154			opp-hz = /bits/ 64 <1100000000>;
155			clock-latency-ns = <300>;
156		};
157	};
158
159	psci {
160		compatible = "arm,psci-1.0";
161		method = "smc";
162	};
163
164	clocks {
165		refclk: ref {
166			compatible = "fixed-clock";
167			#clock-cells = <0>;
168			clock-frequency = <25000000>;
169		};
170	};
171
172	emmc_pwrseq: emmc-pwrseq {
173		compatible = "mmc-pwrseq-emmc";
174		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
175	};
176
177	timer {
178		compatible = "arm,armv8-timer";
179		interrupts = <1 13 4>,
180			     <1 14 4>,
181			     <1 11 4>,
182			     <1 10 4>;
183	};
184
185	thermal-zones {
186		cpu-thermal {
187			polling-delay-passive = <250>;	/* 250ms */
188			polling-delay = <1000>;		/* 1000ms */
189			thermal-sensors = <&pvtctl>;
190
191			trips {
192				cpu_crit: cpu-crit {
193					temperature = <110000>;	/* 110C */
194					hysteresis = <2000>;
195					type = "critical";
196				};
197				cpu_alert: cpu-alert {
198					temperature = <100000>;	/* 100C */
199					hysteresis = <2000>;
200					type = "passive";
201				};
202			};
203
204			cooling-maps {
205				map0 {
206					trip = <&cpu_alert>;
207					cooling-device = <&cpu0
208					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
209				};
210				map1 {
211					trip = <&cpu_alert>;
212					cooling-device = <&cpu2
213					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
214				};
215			};
216		};
217	};
218
219	soc@0 {
220		compatible = "simple-bus";
221		#address-cells = <1>;
222		#size-cells = <1>;
223		ranges = <0 0 0 0xffffffff>;
224
225		serial0: serial@54006800 {
226			compatible = "socionext,uniphier-uart";
227			status = "disabled";
228			reg = <0x54006800 0x40>;
229			interrupts = <0 33 4>;
230			pinctrl-names = "default";
231			pinctrl-0 = <&pinctrl_uart0>;
232			clocks = <&peri_clk 0>;
233			clock-frequency = <58820000>;
234			resets = <&peri_rst 0>;
235		};
236
237		serial1: serial@54006900 {
238			compatible = "socionext,uniphier-uart";
239			status = "disabled";
240			reg = <0x54006900 0x40>;
241			interrupts = <0 35 4>;
242			pinctrl-names = "default";
243			pinctrl-0 = <&pinctrl_uart1>;
244			clocks = <&peri_clk 1>;
245			clock-frequency = <58820000>;
246			resets = <&peri_rst 1>;
247		};
248
249		serial2: serial@54006a00 {
250			compatible = "socionext,uniphier-uart";
251			status = "disabled";
252			reg = <0x54006a00 0x40>;
253			interrupts = <0 37 4>;
254			pinctrl-names = "default";
255			pinctrl-0 = <&pinctrl_uart2>;
256			clocks = <&peri_clk 2>;
257			clock-frequency = <58820000>;
258			resets = <&peri_rst 2>;
259		};
260
261		serial3: serial@54006b00 {
262			compatible = "socionext,uniphier-uart";
263			status = "disabled";
264			reg = <0x54006b00 0x40>;
265			interrupts = <0 177 4>;
266			pinctrl-names = "default";
267			pinctrl-0 = <&pinctrl_uart3>;
268			clocks = <&peri_clk 3>;
269			clock-frequency = <58820000>;
270			resets = <&peri_rst 3>;
271		};
272
273		gpio: gpio@55000000 {
274			compatible = "socionext,uniphier-gpio";
275			reg = <0x55000000 0x200>;
276			interrupt-parent = <&aidet>;
277			interrupt-controller;
278			#interrupt-cells = <2>;
279			gpio-controller;
280			#gpio-cells = <2>;
281			gpio-ranges = <&pinctrl 0 0 0>,
282				      <&pinctrl 96 0 0>,
283				      <&pinctrl 160 0 0>;
284			gpio-ranges-group-names = "gpio_range0",
285						  "gpio_range1",
286						  "gpio_range2";
287			ngpios = <205>;
288			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
289						     <21 217 3>;
290		};
291
292		audio@56000000 {
293			compatible = "socionext,uniphier-ld20-aio";
294			reg = <0x56000000 0x80000>;
295			interrupts = <0 144 4>;
296			pinctrl-names = "default";
297			pinctrl-0 = <&pinctrl_aout1>,
298				    <&pinctrl_aoutiec1>;
299			clock-names = "aio";
300			clocks = <&sys_clk 40>;
301			reset-names = "aio";
302			resets = <&sys_rst 40>;
303			#sound-dai-cells = <1>;
304			socionext,syscon = <&soc_glue>;
305
306			i2s_port0: port@0 {
307				i2s_hdmi: endpoint {
308				};
309			};
310
311			i2s_port1: port@1 {
312				i2s_pcmin2: endpoint {
313				};
314			};
315
316			i2s_port2: port@2 {
317				i2s_line: endpoint {
318					dai-format = "i2s";
319					remote-endpoint = <&evea_line>;
320				};
321			};
322
323			i2s_port3: port@3 {
324				i2s_hpcmout1: endpoint {
325				};
326			};
327
328			i2s_port4: port@4 {
329				i2s_hp: endpoint {
330					dai-format = "i2s";
331					remote-endpoint = <&evea_hp>;
332				};
333			};
334
335			spdif_port0: port@5 {
336				spdif_hiecout1: endpoint {
337				};
338			};
339
340			src_port0: port@6 {
341				i2s_epcmout2: endpoint {
342				};
343			};
344
345			src_port1: port@7 {
346				i2s_epcmout3: endpoint {
347				};
348			};
349
350			comp_spdif_port0: port@8 {
351				comp_spdif_hiecout1: endpoint {
352				};
353			};
354		};
355
356		codec@57900000 {
357			compatible = "socionext,uniphier-evea";
358			reg = <0x57900000 0x1000>;
359			clock-names = "evea", "exiv";
360			clocks = <&sys_clk 41>, <&sys_clk 42>;
361			reset-names = "evea", "exiv", "adamv";
362			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
363			#sound-dai-cells = <1>;
364
365			port@0 {
366				evea_line: endpoint {
367					remote-endpoint = <&i2s_line>;
368				};
369			};
370
371			port@1 {
372				evea_hp: endpoint {
373					remote-endpoint = <&i2s_hp>;
374				};
375			};
376		};
377
378		adamv@57920000 {
379			compatible = "socionext,uniphier-ld20-adamv",
380				     "simple-mfd", "syscon";
381			reg = <0x57920000 0x1000>;
382
383			adamv_rst: reset {
384				compatible = "socionext,uniphier-ld20-adamv-reset";
385				#reset-cells = <1>;
386			};
387		};
388
389		i2c0: i2c@58780000 {
390			compatible = "socionext,uniphier-fi2c";
391			status = "disabled";
392			reg = <0x58780000 0x80>;
393			#address-cells = <1>;
394			#size-cells = <0>;
395			interrupts = <0 41 4>;
396			pinctrl-names = "default";
397			pinctrl-0 = <&pinctrl_i2c0>;
398			clocks = <&peri_clk 4>;
399			resets = <&peri_rst 4>;
400			clock-frequency = <100000>;
401		};
402
403		i2c1: i2c@58781000 {
404			compatible = "socionext,uniphier-fi2c";
405			status = "disabled";
406			reg = <0x58781000 0x80>;
407			#address-cells = <1>;
408			#size-cells = <0>;
409			interrupts = <0 42 4>;
410			pinctrl-names = "default";
411			pinctrl-0 = <&pinctrl_i2c1>;
412			clocks = <&peri_clk 5>;
413			resets = <&peri_rst 5>;
414			clock-frequency = <100000>;
415		};
416
417		i2c2: i2c@58782000 {
418			compatible = "socionext,uniphier-fi2c";
419			reg = <0x58782000 0x80>;
420			#address-cells = <1>;
421			#size-cells = <0>;
422			interrupts = <0 43 4>;
423			clocks = <&peri_clk 6>;
424			resets = <&peri_rst 6>;
425			clock-frequency = <400000>;
426		};
427
428		i2c3: i2c@58783000 {
429			compatible = "socionext,uniphier-fi2c";
430			status = "disabled";
431			reg = <0x58783000 0x80>;
432			#address-cells = <1>;
433			#size-cells = <0>;
434			interrupts = <0 44 4>;
435			pinctrl-names = "default";
436			pinctrl-0 = <&pinctrl_i2c3>;
437			clocks = <&peri_clk 7>;
438			resets = <&peri_rst 7>;
439			clock-frequency = <100000>;
440		};
441
442		i2c4: i2c@58784000 {
443			compatible = "socionext,uniphier-fi2c";
444			status = "disabled";
445			reg = <0x58784000 0x80>;
446			#address-cells = <1>;
447			#size-cells = <0>;
448			interrupts = <0 45 4>;
449			pinctrl-names = "default";
450			pinctrl-0 = <&pinctrl_i2c4>;
451			clocks = <&peri_clk 8>;
452			resets = <&peri_rst 8>;
453			clock-frequency = <100000>;
454		};
455
456		i2c5: i2c@58785000 {
457			compatible = "socionext,uniphier-fi2c";
458			reg = <0x58785000 0x80>;
459			#address-cells = <1>;
460			#size-cells = <0>;
461			interrupts = <0 25 4>;
462			clocks = <&peri_clk 9>;
463			resets = <&peri_rst 9>;
464			clock-frequency = <400000>;
465		};
466
467		system_bus: system-bus@58c00000 {
468			compatible = "socionext,uniphier-system-bus";
469			status = "disabled";
470			reg = <0x58c00000 0x400>;
471			#address-cells = <2>;
472			#size-cells = <1>;
473			pinctrl-names = "default";
474			pinctrl-0 = <&pinctrl_system_bus>;
475		};
476
477		smpctrl@59801000 {
478			compatible = "socionext,uniphier-smpctrl";
479			reg = <0x59801000 0x400>;
480		};
481
482		sdctrl@59810000 {
483			compatible = "socionext,uniphier-ld20-sdctrl",
484				     "simple-mfd", "syscon";
485			reg = <0x59810000 0x400>;
486
487			sd_clk: clock {
488				compatible = "socionext,uniphier-ld20-sd-clock";
489				#clock-cells = <1>;
490			};
491
492			sd_rst: reset {
493				compatible = "socionext,uniphier-ld20-sd-reset";
494				#reset-cells = <1>;
495			};
496		};
497
498		perictrl@59820000 {
499			compatible = "socionext,uniphier-ld20-perictrl",
500				     "simple-mfd", "syscon";
501			reg = <0x59820000 0x200>;
502
503			peri_clk: clock {
504				compatible = "socionext,uniphier-ld20-peri-clock";
505				#clock-cells = <1>;
506			};
507
508			peri_rst: reset {
509				compatible = "socionext,uniphier-ld20-peri-reset";
510				#reset-cells = <1>;
511			};
512		};
513
514		emmc: sdhc@5a000000 {
515			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
516			reg = <0x5a000000 0x400>;
517			interrupts = <0 78 4>;
518			pinctrl-names = "default";
519			pinctrl-0 = <&pinctrl_emmc_1v8>;
520			clocks = <&sys_clk 4>;
521			resets = <&sys_rst 4>;
522			bus-width = <8>;
523			mmc-ddr-1_8v;
524			mmc-hs200-1_8v;
525			mmc-pwrseq = <&emmc_pwrseq>;
526			cdns,phy-input-delay-legacy = <9>;
527			cdns,phy-input-delay-mmc-highspeed = <2>;
528			cdns,phy-input-delay-mmc-ddr = <3>;
529			cdns,phy-dll-delay-sdclk = <21>;
530			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
531		};
532
533		sd: sdhc@5a400000 {
534			compatible = "socionext,uniphier-sdhc";
535			status = "disabled";
536			reg = <0x5a400000 0x800>;
537			interrupts = <0 76 4>;
538			pinctrl-names = "default";
539			pinctrl-0 = <&pinctrl_sd>;
540			clocks = <&sd_clk 0>;
541			reset-names = "host";
542			resets = <&sd_rst 0>;
543			bus-width = <4>;
544			cap-sd-highspeed;
545		};
546
547		soc_glue: soc-glue@5f800000 {
548			compatible = "socionext,uniphier-ld20-soc-glue",
549				     "simple-mfd", "syscon";
550			reg = <0x5f800000 0x2000>;
551
552			pinctrl: pinctrl {
553				compatible = "socionext,uniphier-ld20-pinctrl";
554			};
555		};
556
557		soc-glue@5f900000 {
558			compatible = "socionext,uniphier-ld20-soc-glue-debug",
559				     "simple-mfd";
560			#address-cells = <1>;
561			#size-cells = <1>;
562			ranges = <0 0x5f900000 0x2000>;
563
564			efuse@100 {
565				compatible = "socionext,uniphier-efuse";
566				reg = <0x100 0x28>;
567			};
568
569			efuse@200 {
570				compatible = "socionext,uniphier-efuse";
571				reg = <0x200 0x68>;
572			};
573		};
574
575		aidet: aidet@5fc20000 {
576			compatible = "socionext,uniphier-ld20-aidet";
577			reg = <0x5fc20000 0x200>;
578			interrupt-controller;
579			#interrupt-cells = <2>;
580		};
581
582		gic: interrupt-controller@5fe00000 {
583			compatible = "arm,gic-v3";
584			reg = <0x5fe00000 0x10000>,	/* GICD */
585			      <0x5fe80000 0x80000>;	/* GICR */
586			interrupt-controller;
587			#interrupt-cells = <3>;
588			interrupts = <1 9 4>;
589		};
590
591		sysctrl@61840000 {
592			compatible = "socionext,uniphier-ld20-sysctrl",
593				     "simple-mfd", "syscon";
594			reg = <0x61840000 0x10000>;
595
596			sys_clk: clock {
597				compatible = "socionext,uniphier-ld20-clock";
598				#clock-cells = <1>;
599			};
600
601			sys_rst: reset {
602				compatible = "socionext,uniphier-ld20-reset";
603				#reset-cells = <1>;
604			};
605
606			watchdog {
607				compatible = "socionext,uniphier-wdt";
608			};
609
610			pvtctl: pvtctl {
611				compatible = "socionext,uniphier-ld20-thermal";
612				interrupts = <0 3 4>;
613				#thermal-sensor-cells = <0>;
614				socionext,tmod-calibration = <0x0f22 0x68ee>;
615			};
616		};
617
618		eth: ethernet@65000000 {
619			compatible = "socionext,uniphier-ld20-ave4";
620			status = "disabled";
621			reg = <0x65000000 0x8500>;
622			interrupts = <0 66 4>;
623			pinctrl-names = "default";
624			pinctrl-0 = <&pinctrl_ether_rgmii>;
625			clock-names = "ether";
626			clocks = <&sys_clk 6>;
627			reset-names = "ether";
628			resets = <&sys_rst 6>;
629			phy-mode = "rgmii";
630			local-mac-address = [00 00 00 00 00 00];
631			socionext,syscon-phy-mode = <&soc_glue 0>;
632
633			mdio: mdio {
634				#address-cells = <1>;
635				#size-cells = <0>;
636			};
637		};
638
639		usb: usb@65b00000 {
640			compatible = "socionext,uniphier-ld20-dwc3";
641			reg = <0x65b00000 0x1000>;
642			#address-cells = <1>;
643			#size-cells = <1>;
644			ranges;
645			pinctrl-names = "default";
646			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
647				    <&pinctrl_usb2>, <&pinctrl_usb3>;
648			dwc3@65a00000 {
649				compatible = "snps,dwc3";
650				reg = <0x65a00000 0x10000>;
651				interrupts = <0 134 4>;
652				dr_mode = "host";
653				tx-fifo-resize;
654			};
655		};
656
657		nand: nand@68000000 {
658			compatible = "socionext,uniphier-denali-nand-v5b";
659			status = "disabled";
660			reg-names = "nand_data", "denali_reg";
661			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
662			interrupts = <0 65 4>;
663			pinctrl-names = "default";
664			pinctrl-0 = <&pinctrl_nand>;
665			clocks = <&sys_clk 2>;
666			resets = <&sys_rst 2>;
667		};
668	};
669};
670
671#include "uniphier-pinctrl.dtsi"
672
673&pinctrl_aout1 {
674	drive-strength = <4>;	/* default: 3.5mA */
675
676	ao1dacck {
677		pins = "AO1DACCK";
678		drive-strength = <5>;	/* 5mA */
679	};
680};
681
682&pinctrl_aoutiec1 {
683	drive-strength = <4>;	/* default: 3.5mA */
684
685	ao1arc {
686		pins = "AO1ARC";
687		drive-strength = <11>;	/* 11mA */
688	};
689};
690