xref: /openbmc/u-boot/arch/arm/dts/uniphier-ld20.dtsi (revision 30373ef0)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier LD20 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/gpio/uniphier-gpio.h>
10#include <dt-bindings/thermal/thermal.h>
11
12/memreserve/ 0x80000000 0x02000000;
13
14/ {
15	compatible = "socionext,uniphier-ld20";
16	#address-cells = <2>;
17	#size-cells = <2>;
18	interrupt-parent = <&gic>;
19
20	cpus {
21		#address-cells = <2>;
22		#size-cells = <0>;
23
24		cpu-map {
25			cluster0 {
26				core0 {
27					cpu = <&cpu0>;
28				};
29				core1 {
30					cpu = <&cpu1>;
31				};
32			};
33
34			cluster1 {
35				core0 {
36					cpu = <&cpu2>;
37				};
38				core1 {
39					cpu = <&cpu3>;
40				};
41			};
42		};
43
44		cpu0: cpu@0 {
45			device_type = "cpu";
46			compatible = "arm,cortex-a72", "arm,armv8";
47			reg = <0 0x000>;
48			clocks = <&sys_clk 32>;
49			enable-method = "psci";
50			operating-points-v2 = <&cluster0_opp>;
51			#cooling-cells = <2>;
52		};
53
54		cpu1: cpu@1 {
55			device_type = "cpu";
56			compatible = "arm,cortex-a72", "arm,armv8";
57			reg = <0 0x001>;
58			clocks = <&sys_clk 32>;
59			enable-method = "psci";
60			operating-points-v2 = <&cluster0_opp>;
61		};
62
63		cpu2: cpu@100 {
64			device_type = "cpu";
65			compatible = "arm,cortex-a53", "arm,armv8";
66			reg = <0 0x100>;
67			clocks = <&sys_clk 33>;
68			enable-method = "psci";
69			operating-points-v2 = <&cluster1_opp>;
70			#cooling-cells = <2>;
71		};
72
73		cpu3: cpu@101 {
74			device_type = "cpu";
75			compatible = "arm,cortex-a53", "arm,armv8";
76			reg = <0 0x101>;
77			clocks = <&sys_clk 33>;
78			enable-method = "psci";
79			operating-points-v2 = <&cluster1_opp>;
80		};
81	};
82
83	cluster0_opp: opp-table0 {
84		compatible = "operating-points-v2";
85		opp-shared;
86
87		opp-250000000 {
88			opp-hz = /bits/ 64 <250000000>;
89			clock-latency-ns = <300>;
90		};
91		opp-275000000 {
92			opp-hz = /bits/ 64 <275000000>;
93			clock-latency-ns = <300>;
94		};
95		opp-500000000 {
96			opp-hz = /bits/ 64 <500000000>;
97			clock-latency-ns = <300>;
98		};
99		opp-550000000 {
100			opp-hz = /bits/ 64 <550000000>;
101			clock-latency-ns = <300>;
102		};
103		opp-666667000 {
104			opp-hz = /bits/ 64 <666667000>;
105			clock-latency-ns = <300>;
106		};
107		opp-733334000 {
108			opp-hz = /bits/ 64 <733334000>;
109			clock-latency-ns = <300>;
110		};
111		opp-1000000000 {
112			opp-hz = /bits/ 64 <1000000000>;
113			clock-latency-ns = <300>;
114		};
115		opp-1100000000 {
116			opp-hz = /bits/ 64 <1100000000>;
117			clock-latency-ns = <300>;
118		};
119	};
120
121	cluster1_opp: opp-table1 {
122		compatible = "operating-points-v2";
123		opp-shared;
124
125		opp-250000000 {
126			opp-hz = /bits/ 64 <250000000>;
127			clock-latency-ns = <300>;
128		};
129		opp-275000000 {
130			opp-hz = /bits/ 64 <275000000>;
131			clock-latency-ns = <300>;
132		};
133		opp-500000000 {
134			opp-hz = /bits/ 64 <500000000>;
135			clock-latency-ns = <300>;
136		};
137		opp-550000000 {
138			opp-hz = /bits/ 64 <550000000>;
139			clock-latency-ns = <300>;
140		};
141		opp-666667000 {
142			opp-hz = /bits/ 64 <666667000>;
143			clock-latency-ns = <300>;
144		};
145		opp-733334000 {
146			opp-hz = /bits/ 64 <733334000>;
147			clock-latency-ns = <300>;
148		};
149		opp-1000000000 {
150			opp-hz = /bits/ 64 <1000000000>;
151			clock-latency-ns = <300>;
152		};
153		opp-1100000000 {
154			opp-hz = /bits/ 64 <1100000000>;
155			clock-latency-ns = <300>;
156		};
157	};
158
159	psci {
160		compatible = "arm,psci-1.0";
161		method = "smc";
162	};
163
164	clocks {
165		refclk: ref {
166			compatible = "fixed-clock";
167			#clock-cells = <0>;
168			clock-frequency = <25000000>;
169		};
170	};
171
172	emmc_pwrseq: emmc-pwrseq {
173		compatible = "mmc-pwrseq-emmc";
174		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
175	};
176
177	timer {
178		compatible = "arm,armv8-timer";
179		interrupts = <1 13 4>,
180			     <1 14 4>,
181			     <1 11 4>,
182			     <1 10 4>;
183	};
184
185	thermal-zones {
186		cpu-thermal {
187			polling-delay-passive = <250>;	/* 250ms */
188			polling-delay = <1000>;		/* 1000ms */
189			thermal-sensors = <&pvtctl>;
190
191			trips {
192				cpu_crit: cpu-crit {
193					temperature = <110000>;	/* 110C */
194					hysteresis = <2000>;
195					type = "critical";
196				};
197				cpu_alert: cpu-alert {
198					temperature = <100000>;	/* 100C */
199					hysteresis = <2000>;
200					type = "passive";
201				};
202			};
203
204			cooling-maps {
205				map0 {
206					trip = <&cpu_alert>;
207					cooling-device = <&cpu0
208					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
209				};
210				map1 {
211					trip = <&cpu_alert>;
212					cooling-device = <&cpu2
213					    THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
214				};
215			};
216		};
217	};
218
219	soc@0 {
220		compatible = "simple-bus";
221		#address-cells = <1>;
222		#size-cells = <1>;
223		ranges = <0 0 0 0xffffffff>;
224
225		serial0: serial@54006800 {
226			compatible = "socionext,uniphier-uart";
227			status = "disabled";
228			reg = <0x54006800 0x40>;
229			interrupts = <0 33 4>;
230			pinctrl-names = "default";
231			pinctrl-0 = <&pinctrl_uart0>;
232			clocks = <&peri_clk 0>;
233			resets = <&peri_rst 0>;
234		};
235
236		serial1: serial@54006900 {
237			compatible = "socionext,uniphier-uart";
238			status = "disabled";
239			reg = <0x54006900 0x40>;
240			interrupts = <0 35 4>;
241			pinctrl-names = "default";
242			pinctrl-0 = <&pinctrl_uart1>;
243			clocks = <&peri_clk 1>;
244			resets = <&peri_rst 1>;
245		};
246
247		serial2: serial@54006a00 {
248			compatible = "socionext,uniphier-uart";
249			status = "disabled";
250			reg = <0x54006a00 0x40>;
251			interrupts = <0 37 4>;
252			pinctrl-names = "default";
253			pinctrl-0 = <&pinctrl_uart2>;
254			clocks = <&peri_clk 2>;
255			resets = <&peri_rst 2>;
256		};
257
258		serial3: serial@54006b00 {
259			compatible = "socionext,uniphier-uart";
260			status = "disabled";
261			reg = <0x54006b00 0x40>;
262			interrupts = <0 177 4>;
263			pinctrl-names = "default";
264			pinctrl-0 = <&pinctrl_uart3>;
265			clocks = <&peri_clk 3>;
266			resets = <&peri_rst 3>;
267		};
268
269		gpio: gpio@55000000 {
270			compatible = "socionext,uniphier-gpio";
271			reg = <0x55000000 0x200>;
272			interrupt-parent = <&aidet>;
273			interrupt-controller;
274			#interrupt-cells = <2>;
275			gpio-controller;
276			#gpio-cells = <2>;
277			gpio-ranges = <&pinctrl 0 0 0>,
278				      <&pinctrl 96 0 0>,
279				      <&pinctrl 160 0 0>;
280			gpio-ranges-group-names = "gpio_range0",
281						  "gpio_range1",
282						  "gpio_range2";
283			ngpios = <205>;
284			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
285						     <21 217 3>;
286		};
287
288		audio@56000000 {
289			compatible = "socionext,uniphier-ld20-aio";
290			reg = <0x56000000 0x80000>;
291			interrupts = <0 144 4>;
292			pinctrl-names = "default";
293			pinctrl-0 = <&pinctrl_aout1>,
294				    <&pinctrl_aoutiec1>;
295			clock-names = "aio";
296			clocks = <&sys_clk 40>;
297			reset-names = "aio";
298			resets = <&sys_rst 40>;
299			#sound-dai-cells = <1>;
300			socionext,syscon = <&soc_glue>;
301
302			i2s_port0: port@0 {
303				i2s_hdmi: endpoint {
304				};
305			};
306
307			i2s_port1: port@1 {
308				i2s_pcmin2: endpoint {
309				};
310			};
311
312			i2s_port2: port@2 {
313				i2s_line: endpoint {
314					dai-format = "i2s";
315					remote-endpoint = <&evea_line>;
316				};
317			};
318
319			i2s_port3: port@3 {
320				i2s_hpcmout1: endpoint {
321				};
322			};
323
324			i2s_port4: port@4 {
325				i2s_hp: endpoint {
326					dai-format = "i2s";
327					remote-endpoint = <&evea_hp>;
328				};
329			};
330
331			spdif_port0: port@5 {
332				spdif_hiecout1: endpoint {
333				};
334			};
335
336			src_port0: port@6 {
337				i2s_epcmout2: endpoint {
338				};
339			};
340
341			src_port1: port@7 {
342				i2s_epcmout3: endpoint {
343				};
344			};
345
346			comp_spdif_port0: port@8 {
347				comp_spdif_hiecout1: endpoint {
348				};
349			};
350		};
351
352		codec@57900000 {
353			compatible = "socionext,uniphier-evea";
354			reg = <0x57900000 0x1000>;
355			clock-names = "evea", "exiv";
356			clocks = <&sys_clk 41>, <&sys_clk 42>;
357			reset-names = "evea", "exiv", "adamv";
358			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
359			#sound-dai-cells = <1>;
360
361			port@0 {
362				evea_line: endpoint {
363					remote-endpoint = <&i2s_line>;
364				};
365			};
366
367			port@1 {
368				evea_hp: endpoint {
369					remote-endpoint = <&i2s_hp>;
370				};
371			};
372		};
373
374		adamv@57920000 {
375			compatible = "socionext,uniphier-ld20-adamv",
376				     "simple-mfd", "syscon";
377			reg = <0x57920000 0x1000>;
378
379			adamv_rst: reset {
380				compatible = "socionext,uniphier-ld20-adamv-reset";
381				#reset-cells = <1>;
382			};
383		};
384
385		i2c0: i2c@58780000 {
386			compatible = "socionext,uniphier-fi2c";
387			status = "disabled";
388			reg = <0x58780000 0x80>;
389			#address-cells = <1>;
390			#size-cells = <0>;
391			interrupts = <0 41 4>;
392			pinctrl-names = "default";
393			pinctrl-0 = <&pinctrl_i2c0>;
394			clocks = <&peri_clk 4>;
395			resets = <&peri_rst 4>;
396			clock-frequency = <100000>;
397		};
398
399		i2c1: i2c@58781000 {
400			compatible = "socionext,uniphier-fi2c";
401			status = "disabled";
402			reg = <0x58781000 0x80>;
403			#address-cells = <1>;
404			#size-cells = <0>;
405			interrupts = <0 42 4>;
406			pinctrl-names = "default";
407			pinctrl-0 = <&pinctrl_i2c1>;
408			clocks = <&peri_clk 5>;
409			resets = <&peri_rst 5>;
410			clock-frequency = <100000>;
411		};
412
413		i2c2: i2c@58782000 {
414			compatible = "socionext,uniphier-fi2c";
415			reg = <0x58782000 0x80>;
416			#address-cells = <1>;
417			#size-cells = <0>;
418			interrupts = <0 43 4>;
419			clocks = <&peri_clk 6>;
420			resets = <&peri_rst 6>;
421			clock-frequency = <400000>;
422		};
423
424		i2c3: i2c@58783000 {
425			compatible = "socionext,uniphier-fi2c";
426			status = "disabled";
427			reg = <0x58783000 0x80>;
428			#address-cells = <1>;
429			#size-cells = <0>;
430			interrupts = <0 44 4>;
431			pinctrl-names = "default";
432			pinctrl-0 = <&pinctrl_i2c3>;
433			clocks = <&peri_clk 7>;
434			resets = <&peri_rst 7>;
435			clock-frequency = <100000>;
436		};
437
438		i2c4: i2c@58784000 {
439			compatible = "socionext,uniphier-fi2c";
440			status = "disabled";
441			reg = <0x58784000 0x80>;
442			#address-cells = <1>;
443			#size-cells = <0>;
444			interrupts = <0 45 4>;
445			pinctrl-names = "default";
446			pinctrl-0 = <&pinctrl_i2c4>;
447			clocks = <&peri_clk 8>;
448			resets = <&peri_rst 8>;
449			clock-frequency = <100000>;
450		};
451
452		i2c5: i2c@58785000 {
453			compatible = "socionext,uniphier-fi2c";
454			reg = <0x58785000 0x80>;
455			#address-cells = <1>;
456			#size-cells = <0>;
457			interrupts = <0 25 4>;
458			clocks = <&peri_clk 9>;
459			resets = <&peri_rst 9>;
460			clock-frequency = <400000>;
461		};
462
463		system_bus: system-bus@58c00000 {
464			compatible = "socionext,uniphier-system-bus";
465			status = "disabled";
466			reg = <0x58c00000 0x400>;
467			#address-cells = <2>;
468			#size-cells = <1>;
469			pinctrl-names = "default";
470			pinctrl-0 = <&pinctrl_system_bus>;
471		};
472
473		smpctrl@59801000 {
474			compatible = "socionext,uniphier-smpctrl";
475			reg = <0x59801000 0x400>;
476		};
477
478		sdctrl@59810000 {
479			compatible = "socionext,uniphier-ld20-sdctrl",
480				     "simple-mfd", "syscon";
481			reg = <0x59810000 0x400>;
482
483			sd_clk: clock {
484				compatible = "socionext,uniphier-ld20-sd-clock";
485				#clock-cells = <1>;
486			};
487
488			sd_rst: reset {
489				compatible = "socionext,uniphier-ld20-sd-reset";
490				#reset-cells = <1>;
491			};
492		};
493
494		perictrl@59820000 {
495			compatible = "socionext,uniphier-ld20-perictrl",
496				     "simple-mfd", "syscon";
497			reg = <0x59820000 0x200>;
498
499			peri_clk: clock {
500				compatible = "socionext,uniphier-ld20-peri-clock";
501				#clock-cells = <1>;
502			};
503
504			peri_rst: reset {
505				compatible = "socionext,uniphier-ld20-peri-reset";
506				#reset-cells = <1>;
507			};
508		};
509
510		emmc: sdhc@5a000000 {
511			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
512			reg = <0x5a000000 0x400>;
513			interrupts = <0 78 4>;
514			pinctrl-names = "default";
515			pinctrl-0 = <&pinctrl_emmc_1v8>;
516			clocks = <&sys_clk 4>;
517			resets = <&sys_rst 4>;
518			bus-width = <8>;
519			mmc-ddr-1_8v;
520			mmc-hs200-1_8v;
521			mmc-pwrseq = <&emmc_pwrseq>;
522			cdns,phy-input-delay-legacy = <9>;
523			cdns,phy-input-delay-mmc-highspeed = <2>;
524			cdns,phy-input-delay-mmc-ddr = <3>;
525			cdns,phy-dll-delay-sdclk = <21>;
526			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
527		};
528
529		sd: sdhc@5a400000 {
530			compatible = "socionext,uniphier-sdhc";
531			status = "disabled";
532			reg = <0x5a400000 0x800>;
533			interrupts = <0 76 4>;
534			pinctrl-names = "default";
535			pinctrl-0 = <&pinctrl_sd>;
536			clocks = <&sd_clk 0>;
537			reset-names = "host";
538			resets = <&sd_rst 0>;
539			bus-width = <4>;
540			cap-sd-highspeed;
541		};
542
543		soc_glue: soc-glue@5f800000 {
544			compatible = "socionext,uniphier-ld20-soc-glue",
545				     "simple-mfd", "syscon";
546			reg = <0x5f800000 0x2000>;
547
548			pinctrl: pinctrl {
549				compatible = "socionext,uniphier-ld20-pinctrl";
550			};
551		};
552
553		soc-glue@5f900000 {
554			compatible = "socionext,uniphier-ld20-soc-glue-debug",
555				     "simple-mfd";
556			#address-cells = <1>;
557			#size-cells = <1>;
558			ranges = <0 0x5f900000 0x2000>;
559
560			efuse@100 {
561				compatible = "socionext,uniphier-efuse";
562				reg = <0x100 0x28>;
563			};
564
565			efuse@200 {
566				compatible = "socionext,uniphier-efuse";
567				reg = <0x200 0x68>;
568			};
569		};
570
571		aidet: aidet@5fc20000 {
572			compatible = "socionext,uniphier-ld20-aidet";
573			reg = <0x5fc20000 0x200>;
574			interrupt-controller;
575			#interrupt-cells = <2>;
576		};
577
578		gic: interrupt-controller@5fe00000 {
579			compatible = "arm,gic-v3";
580			reg = <0x5fe00000 0x10000>,	/* GICD */
581			      <0x5fe80000 0x80000>;	/* GICR */
582			interrupt-controller;
583			#interrupt-cells = <3>;
584			interrupts = <1 9 4>;
585		};
586
587		sysctrl@61840000 {
588			compatible = "socionext,uniphier-ld20-sysctrl",
589				     "simple-mfd", "syscon";
590			reg = <0x61840000 0x10000>;
591
592			sys_clk: clock {
593				compatible = "socionext,uniphier-ld20-clock";
594				#clock-cells = <1>;
595			};
596
597			sys_rst: reset {
598				compatible = "socionext,uniphier-ld20-reset";
599				#reset-cells = <1>;
600			};
601
602			watchdog {
603				compatible = "socionext,uniphier-wdt";
604			};
605
606			pvtctl: pvtctl {
607				compatible = "socionext,uniphier-ld20-thermal";
608				interrupts = <0 3 4>;
609				#thermal-sensor-cells = <0>;
610				socionext,tmod-calibration = <0x0f22 0x68ee>;
611			};
612		};
613
614		eth: ethernet@65000000 {
615			compatible = "socionext,uniphier-ld20-ave4";
616			status = "disabled";
617			reg = <0x65000000 0x8500>;
618			interrupts = <0 66 4>;
619			pinctrl-names = "default";
620			pinctrl-0 = <&pinctrl_ether_rgmii>;
621			clock-names = "ether";
622			clocks = <&sys_clk 6>;
623			reset-names = "ether";
624			resets = <&sys_rst 6>;
625			phy-mode = "rgmii";
626			local-mac-address = [00 00 00 00 00 00];
627			socionext,syscon-phy-mode = <&soc_glue 0>;
628
629			mdio: mdio {
630				#address-cells = <1>;
631				#size-cells = <0>;
632			};
633		};
634
635		usb: usb@65b00000 {
636			compatible = "socionext,uniphier-ld20-dwc3";
637			reg = <0x65b00000 0x1000>;
638			#address-cells = <1>;
639			#size-cells = <1>;
640			ranges;
641			pinctrl-names = "default";
642			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
643				    <&pinctrl_usb2>, <&pinctrl_usb3>;
644			dwc3@65a00000 {
645				compatible = "snps,dwc3";
646				reg = <0x65a00000 0x10000>;
647				interrupts = <0 134 4>;
648				dr_mode = "host";
649				tx-fifo-resize;
650			};
651		};
652
653		nand: nand@68000000 {
654			compatible = "socionext,uniphier-denali-nand-v5b";
655			status = "disabled";
656			reg-names = "nand_data", "denali_reg";
657			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
658			interrupts = <0 65 4>;
659			pinctrl-names = "default";
660			pinctrl-0 = <&pinctrl_nand>;
661			clocks = <&sys_clk 2>;
662			resets = <&sys_rst 2>;
663		};
664	};
665};
666
667#include "uniphier-pinctrl.dtsi"
668
669&pinctrl_aout1 {
670	drive-strength = <4>;	/* default: 3.5mA */
671
672	ao1dacck {
673		pins = "AO1DACCK";
674		drive-strength = <5>;	/* 5mA */
675	};
676};
677
678&pinctrl_aoutiec1 {
679	drive-strength = <4>;	/* default: 3.5mA */
680
681	ao1arc {
682		pins = "AO1ARC";
683		drive-strength = <11>;	/* 11mA */
684	};
685};
686