xref: /openbmc/u-boot/arch/arm/dts/uniphier-ld11.dtsi (revision 014a953c)
1/*
2 * Device Tree Source for UniPhier LD11 SoC
3 *
4 * Copyright (C) 2016 Socionext Inc.
5 *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6 *
7 * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 */
9
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/gpio/uniphier-gpio.h>
12
13/memreserve/ 0x80000000 0x02000000;
14
15/ {
16	compatible = "socionext,uniphier-ld11";
17	#address-cells = <2>;
18	#size-cells = <2>;
19	interrupt-parent = <&gic>;
20
21	cpus {
22		#address-cells = <2>;
23		#size-cells = <0>;
24
25		cpu-map {
26			cluster0 {
27				core0 {
28					cpu = <&cpu0>;
29				};
30				core1 {
31					cpu = <&cpu1>;
32				};
33			};
34		};
35
36		cpu0: cpu@0 {
37			device_type = "cpu";
38			compatible = "arm,cortex-a53", "arm,armv8";
39			reg = <0 0x000>;
40			clocks = <&sys_clk 33>;
41			enable-method = "psci";
42			operating-points-v2 = <&cluster0_opp>;
43		};
44
45		cpu1: cpu@1 {
46			device_type = "cpu";
47			compatible = "arm,cortex-a53", "arm,armv8";
48			reg = <0 0x001>;
49			clocks = <&sys_clk 33>;
50			enable-method = "psci";
51			operating-points-v2 = <&cluster0_opp>;
52		};
53	};
54
55	cluster0_opp: opp-table {
56		compatible = "operating-points-v2";
57		opp-shared;
58
59		opp-245000000 {
60			opp-hz = /bits/ 64 <245000000>;
61			clock-latency-ns = <300>;
62		};
63		opp-250000000 {
64			opp-hz = /bits/ 64 <250000000>;
65			clock-latency-ns = <300>;
66		};
67		opp-490000000 {
68			opp-hz = /bits/ 64 <490000000>;
69			clock-latency-ns = <300>;
70		};
71		opp-500000000 {
72			opp-hz = /bits/ 64 <500000000>;
73			clock-latency-ns = <300>;
74		};
75		opp-653334000 {
76			opp-hz = /bits/ 64 <653334000>;
77			clock-latency-ns = <300>;
78		};
79		opp-666667000 {
80			opp-hz = /bits/ 64 <666667000>;
81			clock-latency-ns = <300>;
82		};
83		opp-980000000 {
84			opp-hz = /bits/ 64 <980000000>;
85			clock-latency-ns = <300>;
86		};
87	};
88
89	psci {
90		compatible = "arm,psci-1.0";
91		method = "smc";
92	};
93
94	clocks {
95		refclk: ref {
96			compatible = "fixed-clock";
97			#clock-cells = <0>;
98			clock-frequency = <25000000>;
99		};
100	};
101
102	emmc_pwrseq: emmc-pwrseq {
103		compatible = "mmc-pwrseq-emmc";
104		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
105	};
106
107	timer {
108		compatible = "arm,armv8-timer";
109		interrupts = <1 13 4>,
110			     <1 14 4>,
111			     <1 11 4>,
112			     <1 10 4>;
113	};
114
115	soc@0 {
116		compatible = "simple-bus";
117		#address-cells = <1>;
118		#size-cells = <1>;
119		ranges = <0 0 0 0xffffffff>;
120
121		serial0: serial@54006800 {
122			compatible = "socionext,uniphier-uart";
123			status = "disabled";
124			reg = <0x54006800 0x40>;
125			interrupts = <0 33 4>;
126			pinctrl-names = "default";
127			pinctrl-0 = <&pinctrl_uart0>;
128			clocks = <&peri_clk 0>;
129			clock-frequency = <58820000>;
130			resets = <&peri_rst 0>;
131		};
132
133		serial1: serial@54006900 {
134			compatible = "socionext,uniphier-uart";
135			status = "disabled";
136			reg = <0x54006900 0x40>;
137			interrupts = <0 35 4>;
138			pinctrl-names = "default";
139			pinctrl-0 = <&pinctrl_uart1>;
140			clocks = <&peri_clk 1>;
141			clock-frequency = <58820000>;
142			resets = <&peri_rst 1>;
143		};
144
145		serial2: serial@54006a00 {
146			compatible = "socionext,uniphier-uart";
147			status = "disabled";
148			reg = <0x54006a00 0x40>;
149			interrupts = <0 37 4>;
150			pinctrl-names = "default";
151			pinctrl-0 = <&pinctrl_uart2>;
152			clocks = <&peri_clk 2>;
153			clock-frequency = <58820000>;
154			resets = <&peri_rst 2>;
155		};
156
157		serial3: serial@54006b00 {
158			compatible = "socionext,uniphier-uart";
159			status = "disabled";
160			reg = <0x54006b00 0x40>;
161			interrupts = <0 177 4>;
162			pinctrl-names = "default";
163			pinctrl-0 = <&pinctrl_uart3>;
164			clocks = <&peri_clk 3>;
165			clock-frequency = <58820000>;
166			resets = <&peri_rst 3>;
167		};
168
169		gpio: gpio@55000000 {
170			compatible = "socionext,uniphier-gpio";
171			reg = <0x55000000 0x200>;
172			interrupt-parent = <&aidet>;
173			interrupt-controller;
174			#interrupt-cells = <2>;
175			gpio-controller;
176			#gpio-cells = <2>;
177			gpio-ranges = <&pinctrl 0 0 0>,
178				      <&pinctrl 43 0 0>,
179				      <&pinctrl 51 0 0>,
180				      <&pinctrl 96 0 0>,
181				      <&pinctrl 160 0 0>,
182				      <&pinctrl 184 0 0>;
183			gpio-ranges-group-names = "gpio_range0",
184						  "gpio_range1",
185						  "gpio_range2",
186						  "gpio_range3",
187						  "gpio_range4",
188						  "gpio_range5";
189			ngpios = <200>;
190			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
191						     <21 217 3>;
192		};
193
194		adamv@57920000 {
195			compatible = "socionext,uniphier-ld11-adamv",
196				     "simple-mfd", "syscon";
197			reg = <0x57920000 0x1000>;
198
199			adamv_rst: reset {
200				compatible = "socionext,uniphier-ld11-adamv-reset";
201				#reset-cells = <1>;
202			};
203		};
204
205		i2c0: i2c@58780000 {
206			compatible = "socionext,uniphier-fi2c";
207			status = "disabled";
208			reg = <0x58780000 0x80>;
209			#address-cells = <1>;
210			#size-cells = <0>;
211			interrupts = <0 41 4>;
212			pinctrl-names = "default";
213			pinctrl-0 = <&pinctrl_i2c0>;
214			clocks = <&peri_clk 4>;
215			resets = <&peri_rst 4>;
216			clock-frequency = <100000>;
217		};
218
219		i2c1: i2c@58781000 {
220			compatible = "socionext,uniphier-fi2c";
221			status = "disabled";
222			reg = <0x58781000 0x80>;
223			#address-cells = <1>;
224			#size-cells = <0>;
225			interrupts = <0 42 4>;
226			pinctrl-names = "default";
227			pinctrl-0 = <&pinctrl_i2c1>;
228			clocks = <&peri_clk 5>;
229			resets = <&peri_rst 5>;
230			clock-frequency = <100000>;
231		};
232
233		i2c2: i2c@58782000 {
234			compatible = "socionext,uniphier-fi2c";
235			reg = <0x58782000 0x80>;
236			#address-cells = <1>;
237			#size-cells = <0>;
238			interrupts = <0 43 4>;
239			clocks = <&peri_clk 6>;
240			resets = <&peri_rst 6>;
241			clock-frequency = <400000>;
242		};
243
244		i2c3: i2c@58783000 {
245			compatible = "socionext,uniphier-fi2c";
246			status = "disabled";
247			reg = <0x58783000 0x80>;
248			#address-cells = <1>;
249			#size-cells = <0>;
250			interrupts = <0 44 4>;
251			pinctrl-names = "default";
252			pinctrl-0 = <&pinctrl_i2c3>;
253			clocks = <&peri_clk 7>;
254			resets = <&peri_rst 7>;
255			clock-frequency = <100000>;
256		};
257
258		i2c4: i2c@58784000 {
259			compatible = "socionext,uniphier-fi2c";
260			status = "disabled";
261			reg = <0x58784000 0x80>;
262			#address-cells = <1>;
263			#size-cells = <0>;
264			interrupts = <0 45 4>;
265			pinctrl-names = "default";
266			pinctrl-0 = <&pinctrl_i2c4>;
267			clocks = <&peri_clk 8>;
268			resets = <&peri_rst 8>;
269			clock-frequency = <100000>;
270		};
271
272		i2c5: i2c@58785000 {
273			compatible = "socionext,uniphier-fi2c";
274			reg = <0x58785000 0x80>;
275			#address-cells = <1>;
276			#size-cells = <0>;
277			interrupts = <0 25 4>;
278			clocks = <&peri_clk 9>;
279			resets = <&peri_rst 9>;
280			clock-frequency = <400000>;
281		};
282
283		system_bus: system-bus@58c00000 {
284			compatible = "socionext,uniphier-system-bus";
285			status = "disabled";
286			reg = <0x58c00000 0x400>;
287			#address-cells = <2>;
288			#size-cells = <1>;
289			pinctrl-names = "default";
290			pinctrl-0 = <&pinctrl_system_bus>;
291		};
292
293		smpctrl@59801000 {
294			compatible = "socionext,uniphier-smpctrl";
295			reg = <0x59801000 0x400>;
296		};
297
298		sdctrl@59810000 {
299			compatible = "socionext,uniphier-ld11-sdctrl",
300				     "simple-mfd", "syscon";
301			reg = <0x59810000 0x400>;
302
303			sd_rst: reset {
304				compatible = "socionext,uniphier-ld11-sd-reset";
305				#reset-cells = <1>;
306			};
307		};
308
309		perictrl@59820000 {
310			compatible = "socionext,uniphier-ld11-perictrl",
311				     "simple-mfd", "syscon";
312			reg = <0x59820000 0x200>;
313
314			peri_clk: clock {
315				compatible = "socionext,uniphier-ld11-peri-clock";
316				#clock-cells = <1>;
317			};
318
319			peri_rst: reset {
320				compatible = "socionext,uniphier-ld11-peri-reset";
321				#reset-cells = <1>;
322			};
323		};
324
325		emmc: sdhc@5a000000 {
326			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
327			reg = <0x5a000000 0x400>;
328			interrupts = <0 78 4>;
329			pinctrl-names = "default";
330			pinctrl-0 = <&pinctrl_emmc_1v8>;
331			clocks = <&sys_clk 4>;
332			resets = <&sys_rst 4>;
333			bus-width = <8>;
334			mmc-ddr-1_8v;
335			mmc-hs200-1_8v;
336			mmc-pwrseq = <&emmc_pwrseq>;
337			cdns,phy-input-delay-legacy = <4>;
338			cdns,phy-input-delay-mmc-highspeed = <2>;
339			cdns,phy-input-delay-mmc-ddr = <3>;
340			cdns,phy-dll-delay-sdclk = <21>;
341			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
342		};
343
344		usb0: usb@5a800100 {
345			compatible = "socionext,uniphier-ehci", "generic-ehci";
346			status = "disabled";
347			reg = <0x5a800100 0x100>;
348			interrupts = <0 243 4>;
349			pinctrl-names = "default";
350			pinctrl-0 = <&pinctrl_usb0>;
351			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
352				 <&mio_clk 12>;
353			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
354				 <&mio_rst 12>;
355		};
356
357		usb1: usb@5a810100 {
358			compatible = "socionext,uniphier-ehci", "generic-ehci";
359			status = "disabled";
360			reg = <0x5a810100 0x100>;
361			interrupts = <0 244 4>;
362			pinctrl-names = "default";
363			pinctrl-0 = <&pinctrl_usb1>;
364			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
365				 <&mio_clk 13>;
366			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
367				 <&mio_rst 13>;
368		};
369
370		usb2: usb@5a820100 {
371			compatible = "socionext,uniphier-ehci", "generic-ehci";
372			status = "disabled";
373			reg = <0x5a820100 0x100>;
374			interrupts = <0 245 4>;
375			pinctrl-names = "default";
376			pinctrl-0 = <&pinctrl_usb2>;
377			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
378				 <&mio_clk 14>;
379			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
380				 <&mio_rst 14>;
381		};
382
383		mioctrl@5b3e0000 {
384			compatible = "socionext,uniphier-ld11-mioctrl",
385				     "simple-mfd", "syscon";
386			reg = <0x5b3e0000 0x800>;
387
388			mio_clk: clock {
389				compatible = "socionext,uniphier-ld11-mio-clock";
390				#clock-cells = <1>;
391			};
392
393			mio_rst: reset {
394				compatible = "socionext,uniphier-ld11-mio-reset";
395				#reset-cells = <1>;
396				resets = <&sys_rst 7>;
397			};
398		};
399
400		soc-glue@5f800000 {
401			compatible = "socionext,uniphier-ld11-soc-glue",
402				     "simple-mfd", "syscon";
403			reg = <0x5f800000 0x2000>;
404
405			pinctrl: pinctrl {
406				compatible = "socionext,uniphier-ld11-pinctrl";
407			};
408		};
409
410		soc-glue@5f900000 {
411			compatible = "socionext,uniphier-ld11-soc-glue-debug",
412				     "simple-mfd";
413			#address-cells = <1>;
414			#size-cells = <1>;
415			ranges = <0 0x5f900000 0x2000>;
416
417			efuse@100 {
418				compatible = "socionext,uniphier-efuse";
419				reg = <0x100 0x28>;
420			};
421
422			efuse@200 {
423				compatible = "socionext,uniphier-efuse";
424				reg = <0x200 0x68>;
425			};
426		};
427
428		aidet: aidet@5fc20000 {
429			compatible = "socionext,uniphier-ld11-aidet";
430			reg = <0x5fc20000 0x200>;
431			interrupt-controller;
432			#interrupt-cells = <2>;
433		};
434
435		gic: interrupt-controller@5fe00000 {
436			compatible = "arm,gic-v3";
437			reg = <0x5fe00000 0x10000>,	/* GICD */
438			      <0x5fe40000 0x80000>;	/* GICR */
439			interrupt-controller;
440			#interrupt-cells = <3>;
441			interrupts = <1 9 4>;
442		};
443
444		sysctrl@61840000 {
445			compatible = "socionext,uniphier-ld11-sysctrl",
446				     "simple-mfd", "syscon";
447			reg = <0x61840000 0x10000>;
448
449			sys_clk: clock {
450				compatible = "socionext,uniphier-ld11-clock";
451				#clock-cells = <1>;
452			};
453
454			sys_rst: reset {
455				compatible = "socionext,uniphier-ld11-reset";
456				#reset-cells = <1>;
457			};
458
459			watchdog {
460				compatible = "socionext,uniphier-wdt";
461			};
462		};
463
464		nand: nand@68000000 {
465			compatible = "socionext,uniphier-denali-nand-v5b";
466			status = "disabled";
467			reg-names = "nand_data", "denali_reg";
468			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
469			interrupts = <0 65 4>;
470			pinctrl-names = "default";
471			pinctrl-0 = <&pinctrl_nand>;
472			clocks = <&sys_clk 2>;
473			resets = <&sys_rst 2>;
474		};
475	};
476};
477
478#include "uniphier-pinctrl.dtsi"
479