1/dts-v1/; 2 3#include "tegra30.dtsi" 4 5/ { 6 model = "Toradex Apalis T30"; 7 compatible = "toradex,apalis_t30", "nvidia,tegra30"; 8 9 chosen { 10 stdout-path = &uarta; 11 }; 12 13 aliases { 14 i2c0 = "/i2c@7000d000"; 15 i2c1 = "/i2c@7000c000"; 16 i2c2 = "/i2c@7000c500"; 17 i2c3 = "/i2c@7000c700"; 18 mmc0 = "/sdhci@78000600"; 19 mmc1 = "/sdhci@78000400"; 20 mmc2 = "/sdhci@78000000"; 21 spi0 = "/spi@7000d400"; 22 spi1 = "/spi@7000dc00"; 23 spi2 = "/spi@7000de00"; 24 spi3 = "/spi@7000da00"; 25 usb0 = "/usb@7d000000"; 26 usb1 = "/usb@7d004000"; 27 usb2 = "/usb@7d008000"; 28 }; 29 30 memory { 31 device_type = "memory"; 32 reg = <0x80000000 0x40000000>; 33 }; 34 35 pcie-controller@00003000 { 36 status = "okay"; 37 avdd-pexa-supply = <&vdd2_reg>; 38 vdd-pexa-supply = <&vdd2_reg>; 39 avdd-pexb-supply = <&vdd2_reg>; 40 vdd-pexb-supply = <&vdd2_reg>; 41 avdd-pex-pll-supply = <&vdd2_reg>; 42 avdd-plle-supply = <&ldo6_reg>; 43 vddio-pex-ctl-supply = <&sys_3v3_reg>; 44 hvdd-pex-supply = <&sys_3v3_reg>; 45 46 /* Apalis Type Specific 4 Lane PCIe */ 47 pci@1,0 { 48 /* TS_DIFF1/2/3/4 left disabled */ 49 nvidia,num-lanes = <4>; 50 }; 51 52 /* Apalis PCIe */ 53 pci@2,0 { 54 /* PCIE1_RX/TX left disabled */ 55 nvidia,num-lanes = <1>; 56 }; 57 58 /* I210 Gigabit Ethernet Controller (On-module) */ 59 pci@3,0 { 60 status = "okay"; 61 nvidia,num-lanes = <1>; 62 }; 63 }; 64 65 /* 66 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier 67 * board) 68 */ 69 i2c@7000c000 { 70 status = "okay"; 71 clock-frequency = <400000>; 72 }; 73 74 /* GEN2_I2C: unused */ 75 76 /* 77 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on 78 * carrier board) 79 */ 80 i2c@7000c500 { 81 status = "okay"; 82 clock-frequency = <400000>; 83 }; 84 85 /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ 86 i2c@7000c700 { 87 status = "okay"; 88 clock-frequency = <10000>; 89 }; 90 91 /* 92 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and 93 * touch screen controller 94 */ 95 i2c@7000d000 { 96 status = "okay"; 97 clock-frequency = <100000>; 98 99 pmic: tps65911@2d { 100 compatible = "ti,tps65911"; 101 reg = <0x2d>; 102 103 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 104 #interrupt-cells = <2>; 105 interrupt-controller; 106 107 ti,system-power-controller; 108 109 #gpio-cells = <2>; 110 gpio-controller; 111 112 vcc1-supply = <&sys_3v3_reg>; 113 vcc2-supply = <&sys_3v3_reg>; 114 vcc3-supply = <&vio_reg>; 115 vcc4-supply = <&sys_3v3_reg>; 116 vcc5-supply = <&sys_3v3_reg>; 117 vcc6-supply = <&vio_reg>; 118 vcc7-supply = <&charge_pump_5v0_reg>; 119 vccio-supply = <&sys_3v3_reg>; 120 121 regulators { 122 /* SW1: +V1.35_VDDIO_DDR */ 123 vdd1_reg: vdd1 { 124 regulator-name = "vddio_ddr_1v35"; 125 regulator-min-microvolt = <1350000>; 126 regulator-max-microvolt = <1350000>; 127 regulator-always-on; 128 }; 129 130 /* SW2: +V1.05 */ 131 vdd2_reg: vdd2 { 132 regulator-name = 133 "vdd_pexa,vdd_pexb,vdd_sata"; 134 regulator-min-microvolt = <1050000>; 135 regulator-max-microvolt = <1050000>; 136 }; 137 138 /* SW CTRL: +V1.0_VDD_CPU */ 139 vddctrl_reg: vddctrl { 140 regulator-name = "vdd_cpu,vdd_sys"; 141 regulator-min-microvolt = <1150000>; 142 regulator-max-microvolt = <1150000>; 143 regulator-always-on; 144 }; 145 146 /* SWIO: +V1.8 */ 147 vio_reg: vio { 148 regulator-name = "vdd_1v8_gen"; 149 regulator-min-microvolt = <1800000>; 150 regulator-max-microvolt = <1800000>; 151 regulator-always-on; 152 }; 153 154 /* LDO1: unused */ 155 156 /* 157 * EN_+V3.3 switching via FET: 158 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN 159 * see also v3_3 fixed supply 160 */ 161 ldo2_reg: ldo2 { 162 regulator-name = "en_3v3"; 163 regulator-min-microvolt = <3300000>; 164 regulator-max-microvolt = <3300000>; 165 regulator-always-on; 166 }; 167 168 /* +V1.2_CSI */ 169 ldo3_reg: ldo3 { 170 regulator-name = 171 "avdd_dsi_csi,pwrdet_mipi"; 172 regulator-min-microvolt = <1200000>; 173 regulator-max-microvolt = <1200000>; 174 }; 175 176 /* +V1.2_VDD_RTC */ 177 ldo4_reg: ldo4 { 178 regulator-name = "vdd_rtc"; 179 regulator-min-microvolt = <1200000>; 180 regulator-max-microvolt = <1200000>; 181 regulator-always-on; 182 }; 183 184 /* 185 * +V2.8_AVDD_VDAC: 186 * only required for analog RGB 187 */ 188 ldo5_reg: ldo5 { 189 regulator-name = "avdd_vdac"; 190 regulator-min-microvolt = <2800000>; 191 regulator-max-microvolt = <2800000>; 192 regulator-always-on; 193 }; 194 195 /* 196 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V 197 * but LDO6 can't set voltage in 50mV 198 * granularity 199 */ 200 ldo6_reg: ldo6 { 201 regulator-name = "avdd_plle"; 202 regulator-min-microvolt = <1100000>; 203 regulator-max-microvolt = <1100000>; 204 }; 205 206 /* +V1.2_AVDD_PLL */ 207 ldo7_reg: ldo7 { 208 regulator-name = "avdd_pll"; 209 regulator-min-microvolt = <1200000>; 210 regulator-max-microvolt = <1200000>; 211 regulator-always-on; 212 }; 213 214 /* +V1.0_VDD_DDR_HS */ 215 ldo8_reg: ldo8 { 216 regulator-name = "vdd_ddr_hs"; 217 regulator-min-microvolt = <1000000>; 218 regulator-max-microvolt = <1000000>; 219 regulator-always-on; 220 }; 221 }; 222 }; 223 }; 224 225 /* SPI1: Apalis SPI1 */ 226 spi@7000d400 { 227 status = "okay"; 228 spi-max-frequency = <25000000>; 229 }; 230 231 /* SPI4: CAN2 */ 232 spi@7000da00 { 233 status = "okay"; 234 spi-max-frequency = <25000000>; 235 }; 236 237 /* SPI5: Apalis SPI2 */ 238 spi@7000dc00 { 239 status = "okay"; 240 spi-max-frequency = <25000000>; 241 }; 242 243 /* SPI6: CAN1 */ 244 spi@7000de00 { 245 status = "okay"; 246 spi-max-frequency = <25000000>; 247 }; 248 249 sdhci@78000000 { 250 status = "okay"; 251 bus-width = <4>; 252 /* SD1_CD# */ 253 cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; 254 }; 255 256 sdhci@78000400 { 257 status = "okay"; 258 bus-width = <8>; 259 /* MMC1_CD# */ 260 cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; 261 }; 262 263 sdhci@78000600 { 264 status = "okay"; 265 bus-width = <8>; 266 non-removable; 267 }; 268 269 /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ 270 usb@7d000000 { 271 status = "okay"; 272 dr_mode = "otg"; 273 /* USBO1_EN */ 274 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; 275 }; 276 277 /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ 278 usb@7d004000 { 279 status = "okay"; 280 /* USBH_EN */ 281 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; 282 }; 283 284 /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ 285 usb@7d008000 { 286 status = "okay"; 287 /* USBH_EN */ 288 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; 289 }; 290 291 clocks { 292 compatible = "simple-bus"; 293 #address-cells = <1>; 294 #size-cells = <0>; 295 296 clk32k_in: clk@0 { 297 compatible = "fixed-clock"; 298 reg=<0>; 299 #clock-cells = <0>; 300 clock-frequency = <32768>; 301 }; 302 clk16m: clk@1 { 303 compatible = "fixed-clock"; 304 reg=<1>; 305 #clock-cells = <0>; 306 clock-frequency = <16000000>; 307 clock-output-names = "clk16m"; 308 }; 309 }; 310 311 regulators { 312 compatible = "simple-bus"; 313 #address-cells = <1>; 314 #size-cells = <0>; 315 316 sys_3v3_reg: regulator@100 { 317 compatible = "regulator-fixed"; 318 reg = <100>; 319 regulator-name = "3v3"; 320 regulator-min-microvolt = <3300000>; 321 regulator-max-microvolt = <3300000>; 322 regulator-always-on; 323 }; 324 325 charge_pump_5v0_reg: regulator@101 { 326 compatible = "regulator-fixed"; 327 reg = <101>; 328 regulator-name = "5v0"; 329 regulator-min-microvolt = <5000000>; 330 regulator-max-microvolt = <5000000>; 331 regulator-always-on; 332 }; 333 }; 334}; 335 336&uarta { 337 status = "okay"; 338}; 339