1/dts-v1/; 2 3#include "tegra20.dtsi" 4 5/ { 6 model = "Compulab TrimSlice board"; 7 compatible = "compulab,trimslice", "nvidia,tegra20"; 8 9 chosen { 10 stdout-path = &uarta; 11 }; 12 13 aliases { 14 usb0 = "/usb@c5008000"; 15 usb1 = "/usb@c5000000"; 16 sdhci0 = "/sdhci@c8000600"; 17 sdhci1 = "/sdhci@c8000000"; 18 spi0 = "/spi@7000c380"; 19 }; 20 21 memory { 22 reg = <0x00000000 0x40000000>; 23 }; 24 25 serial@70006000 { 26 clock-frequency = <216000000>; 27 }; 28 29 i2c@7000c000 { 30 status = "disabled"; 31 }; 32 33 spi@7000c380 { 34 status = "okay"; 35 spi-max-frequency = <25000000>; 36 }; 37 38 i2c@7000c400 { 39 status = "disabled"; 40 }; 41 42 i2c@7000c500 { 43 status = "disabled"; 44 }; 45 46 i2c@7000d000 { 47 status = "disabled"; 48 }; 49 50 pcie-controller@80003000 { 51 status = "okay"; 52 53 avdd-pex-supply = <&pci_vdd_reg>; 54 vdd-pex-supply = <&pci_vdd_reg>; 55 avdd-pex-pll-supply = <&pci_vdd_reg>; 56 avdd-plle-supply = <&pci_vdd_reg>; 57 vddio-pex-clk-supply = <&pci_clk_reg>; 58 59 pci@1,0 { 60 status = "okay"; 61 }; 62 }; 63 64 usb@c5000000 { 65 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; 66 }; 67 68 usb@c5004000 { 69 status = "disabled"; 70 }; 71 72 sdhci@c8000000 { 73 status = "okay"; 74 bus-width = <4>; 75 }; 76 77 sdhci@c8000600 { 78 status = "okay"; 79 cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>; 80 wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; 81 bus-width = <4>; 82 }; 83 84 regulators { 85 compatible = "simple-bus"; 86 #address-cells = <1>; 87 #size-cells = <0>; 88 89 hdmi_vdd_reg: regulator@0 { 90 compatible = "regulator-fixed"; 91 reg = <0>; 92 regulator-name = "avdd_hdmi"; 93 regulator-min-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>; 95 regulator-always-on; 96 }; 97 98 hdmi_pll_reg: regulator@1 { 99 compatible = "regulator-fixed"; 100 reg = <1>; 101 regulator-name = "avdd_hdmi_pll"; 102 regulator-min-microvolt = <1800000>; 103 regulator-max-microvolt = <1800000>; 104 regulator-always-on; 105 }; 106 107 vbus_reg: regulator@2 { 108 compatible = "regulator-fixed"; 109 reg = <2>; 110 regulator-name = "usb1_vbus"; 111 regulator-min-microvolt = <5000000>; 112 regulator-max-microvolt = <5000000>; 113 enable-active-high; 114 gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; 115 regulator-always-on; 116 regulator-boot-on; 117 }; 118 119 pci_clk_reg: regulator@3 { 120 compatible = "regulator-fixed"; 121 reg = <3>; 122 regulator-name = "pci_clk"; 123 regulator-min-microvolt = <3300000>; 124 regulator-max-microvolt = <3300000>; 125 regulator-always-on; 126 }; 127 128 pci_vdd_reg: regulator@4 { 129 compatible = "regulator-fixed"; 130 reg = <4>; 131 regulator-name = "pci_vdd"; 132 regulator-min-microvolt = <1050000>; 133 regulator-max-microvolt = <1050000>; 134 regulator-always-on; 135 }; 136 }; 137 138}; 139