1/dts-v1/; 2 3#include "tegra20.dtsi" 4 5/ { 6 model = "Toshiba AC100 / Dynabook AZ"; 7 compatible = "compal,paz00", "nvidia,tegra20"; 8 9 chosen { 10 stdout-path = &uarta; 11 }; 12 13 aliases { 14 usb0 = "/usb@c5008000"; 15 mmc0 = "/sdhci@c8000600"; 16 mmc1 = "/sdhci@c8000000"; 17 }; 18 19 memory { 20 reg = <0x00000000 0x20000000>; 21 }; 22 23 host1x@50000000 { 24 status = "okay"; 25 dc@54200000 { 26 status = "okay"; 27 rgb { 28 status = "okay"; 29 nvidia,panel = <&lcd_panel>; 30 }; 31 }; 32 }; 33 34 serial@70006000 { 35 clock-frequency = < 216000000 >; 36 }; 37 38 usb@c5008000 { 39 status = "okay"; 40 }; 41 42 sdhci@c8000000 { 43 status = "okay"; 44 cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; 45 wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; 46 power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; 47 bus-width = <4>; 48 }; 49 50 sdhci@c8000600 { 51 status = "okay"; 52 bus-width = <8>; 53 non-removable; 54 }; 55 56 clocks { 57 compatible = "simple-bus"; 58 #address-cells = <1>; 59 #size-cells = <0>; 60 61 clk32k_in: clock@0 { 62 compatible = "fixed-clock"; 63 reg=<0>; 64 #clock-cells = <0>; 65 clock-frequency = <32768>; 66 }; 67 }; 68 69 pwm: pwm@7000a000 { 70 status = "okay"; 71 }; 72 73 lcd_panel: panel { 74 /* PAZ00 has 1024x600 */ 75 clock = <54030000>; 76 xres = <1024>; 77 yres = <600>; 78 right-margin = <160>; 79 left-margin = <24>; 80 hsync-len = <136>; 81 upper-margin = <3>; 82 lower-margin = <61>; 83 vsync-len = <6>; 84 hsync-active-high; 85 nvidia,bits-per-pixel = <16>; 86 nvidia,pwm = <&pwm 0 0>; 87 nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(U, 4) 88 GPIO_ACTIVE_HIGH>; 89 nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(M, 6) 90 GPIO_ACTIVE_HIGH>; 91 nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0) 92 GPIO_ACTIVE_HIGH>; 93 nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(A, 4) 94 GPIO_ACTIVE_HIGH>; 95 nvidia,panel-timings = <400 4 203 17 15>; 96 }; 97}; 98