1/dts-v1/; 2 3#include "tegra20.dtsi" 4 5/ { 6 model = "Toshiba AC100 / Dynabook AZ"; 7 compatible = "compal,paz00", "nvidia,tegra20"; 8 9 chosen { 10 stdout-path = &uarta; 11 }; 12 13 aliases { 14 usb0 = "/usb@c5008000"; 15 sdhci0 = "/sdhci@c8000600"; 16 sdhci1 = "/sdhci@c8000000"; 17 }; 18 19 memory { 20 reg = <0x00000000 0x20000000>; 21 }; 22 23 host1x { 24 status = "okay"; 25 dc@54200000 { 26 status = "okay"; 27 rgb { 28 status = "okay"; 29 nvidia,panel = <&lcd_panel>; 30 }; 31 }; 32 }; 33 34 serial@70006000 { 35 clock-frequency = < 216000000 >; 36 }; 37 38 i2c@7000c000 { 39 status = "disabled"; 40 }; 41 42 i2c@7000c400 { 43 status = "disabled"; 44 }; 45 46 i2c@7000c500 { 47 status = "disabled"; 48 }; 49 50 i2c@7000d000 { 51 status = "disabled"; 52 }; 53 54 usb@c5000000 { 55 status = "disabled"; 56 }; 57 58 usb@c5004000 { 59 status = "disabled"; 60 }; 61 62 sdhci@c8000000 { 63 status = "okay"; 64 cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; 65 wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; 66 power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; 67 bus-width = <4>; 68 }; 69 70 sdhci@c8000600 { 71 status = "okay"; 72 bus-width = <8>; 73 }; 74 75 lcd_panel: panel { 76 /* PAZ00 has 1024x600 */ 77 clock = <54030000>; 78 xres = <1024>; 79 yres = <600>; 80 right-margin = <160>; 81 left-margin = <24>; 82 hsync-len = <136>; 83 upper-margin = <3>; 84 lower-margin = <61>; 85 vsync-len = <6>; 86 hsync-active-high; 87 nvidia,bits-per-pixel = <16>; 88 nvidia,pwm = <&pwm 0 0>; 89 nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(U, 4) 90 GPIO_ACTIVE_HIGH>; 91 nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(M, 6) 92 GPIO_ACTIVE_HIGH>; 93 nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0) 94 GPIO_ACTIVE_HIGH>; 95 nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(A, 4) 96 GPIO_ACTIVE_HIGH>; 97 nvidia,panel-timings = <400 4 203 17 15>; 98 }; 99}; 100