xref: /openbmc/u-boot/arch/arm/dts/tegra20-paz00.dts (revision 7d3ca0f8)
1/dts-v1/;
2
3#include "tegra20.dtsi"
4
5/ {
6	model = "Toshiba AC100 / Dynabook AZ";
7	compatible = "compal,paz00", "nvidia,tegra20";
8
9	aliases {
10		usb0 = "/usb@c5008000";
11		sdhci0 = "/sdhci@c8000600";
12		sdhci1 = "/sdhci@c8000000";
13	};
14
15	memory {
16		reg = <0x00000000 0x20000000>;
17	};
18
19	host1x {
20		status = "okay";
21		dc@54200000 {
22			status = "okay";
23			rgb {
24				status = "okay";
25				nvidia,panel = <&lcd_panel>;
26			};
27		};
28	};
29
30	serial@70006000 {
31		clock-frequency = < 216000000 >;
32	};
33
34	i2c@7000c000 {
35		status = "disabled";
36	};
37
38	i2c@7000c400 {
39		status = "disabled";
40	};
41
42	i2c@7000c500 {
43		status = "disabled";
44	};
45
46	i2c@7000d000 {
47		status = "disabled";
48	};
49
50	usb@c5000000 {
51		status = "disabled";
52	};
53
54	usb@c5004000 {
55		status = "disabled";
56	};
57
58	sdhci@c8000000 {
59		status = "okay";
60		cd-gpios = <&gpio 173 1>; /* gpio PV5 */
61		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
62		power-gpios = <&gpio 169 0>; /* gpio PV1 */
63		bus-width = <4>;
64	};
65
66	sdhci@c8000600 {
67		status = "okay";
68		bus-width = <8>;
69	};
70
71	lcd_panel: panel {
72		/* PAZ00 has 1024x600 */
73		clock = <54030000>;
74		xres = <1024>;
75		yres = <600>;
76		right-margin = <160>;
77		left-margin = <24>;
78		hsync-len = <136>;
79		upper-margin = <3>;
80		lower-margin = <61>;
81		vsync-len = <6>;
82		hsync-active-high;
83		nvidia,bits-per-pixel = <16>;
84		nvidia,pwm = <&pwm 0 0>;
85		nvidia,backlight-enable-gpios = <&gpio 164 0>;	/* PU4 */
86		nvidia,lvds-shutdown-gpios = <&gpio 102 0>;	/* PM6 */
87		nvidia,backlight-vdd-gpios = <&gpio 176 0>;	/* PW0 */
88		nvidia,panel-vdd-gpios = <&gpio 4 0>;		/* PA4 */
89		nvidia,panel-timings = <400 4 203 17 15>;
90	};
91};
92