1/* 2 * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org> 3 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> 4 * 5 * This file is dual-licensed: you can use it either under the terms 6 * of the GPL or the X11 license, at your option. Note that this dual 7 * licensing only applies to this file, and not this project as a 8 * whole. 9 * 10 * a) This file is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of the 13 * License, or (at your option) any later version. 14 * 15 * This file is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * Or, alternatively, 21 * 22 * b) Permission is hereby granted, free of charge, to any person 23 * obtaining a copy of this software and associated documentation 24 * files (the "Software"), to deal in the Software without 25 * restriction, including without limitation the rights to use, 26 * copy, modify, merge, publish, distribute, sublicense, and/or 27 * sell copies of the Software, and to permit persons to whom the 28 * Software is furnished to do so, subject to the following 29 * conditions: 30 * 31 * The above copyright notice and this permission notice shall be 32 * included in all copies or substantial portions of the Software. 33 * 34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 41 * OTHER DEALINGS IN THE SOFTWARE. 42 */ 43 44/dts-v1/; 45#include "sun8i-r40.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "Banana Pi BPI-M2-Ultra"; 51 compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40"; 52 53 aliases { 54 ethernet0 = &gmac; 55 serial0 = &uart0; 56 }; 57 58 chosen { 59 stdout-path = "serial0:115200n8"; 60 }; 61 62 leds { 63 compatible = "gpio-leds"; 64 65 pwr-led { 66 label = "bananapi:red:pwr"; 67 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; 68 default-state = "on"; 69 }; 70 71 user-led-green { 72 label = "bananapi:green:user"; 73 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; 74 }; 75 76 user-led-blue { 77 label = "bananapi:blue:user"; 78 gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; 79 }; 80 }; 81 82 reg_vcc5v0: vcc5v0 { 83 compatible = "regulator-fixed"; 84 regulator-name = "vcc5v0"; 85 regulator-min-microvolt = <5000000>; 86 regulator-max-microvolt = <5000000>; 87 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ 88 enable-active-high; 89 }; 90 91 wifi_pwrseq: wifi_pwrseq { 92 compatible = "mmc-pwrseq-simple"; 93 reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ 94 }; 95}; 96 97&ehci1 { 98 status = "okay"; 99}; 100 101&ehci2 { 102 status = "okay"; 103}; 104 105&gmac { 106 pinctrl-names = "default"; 107 pinctrl-0 = <&gmac_rgmii_pins>; 108 phy-handle = <&phy1>; 109 phy-mode = "rgmii"; 110 phy-supply = <®_dc1sw>; 111 status = "okay"; 112}; 113 114&gmac_mdio { 115 phy1: ethernet-phy@1 { 116 compatible = "ethernet-phy-ieee802.3-c22"; 117 reg = <1>; 118 }; 119}; 120 121&i2c0 { 122 status = "okay"; 123 124 axp22x: pmic@34 { 125 compatible = "x-powers,axp221"; 126 reg = <0x34>; 127 interrupt-parent = <&nmi_intc>; 128 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 129 }; 130}; 131 132#include "axp22x.dtsi" 133 134&mmc0 { 135 vmmc-supply = <®_dcdc1>; 136 bus-width = <4>; 137 cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ 138 cd-inverted; 139 status = "okay"; 140}; 141 142&mmc1 { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&mmc1_pg_pins>; 145 vmmc-supply = <®_dldo2>; 146 vqmmc-supply = <®_dldo1>; 147 mmc-pwrseq = <&wifi_pwrseq>; 148 bus-width = <4>; 149 non-removable; 150 status = "okay"; 151}; 152 153&mmc2 { 154 vmmc-supply = <®_dcdc1>; 155 vqmmc-supply = <®_dcdc1>; 156 bus-width = <8>; 157 non-removable; 158 status = "okay"; 159}; 160 161&ohci1 { 162 status = "okay"; 163}; 164 165&ohci2 { 166 status = "okay"; 167}; 168 169®_aldo2 { 170 regulator-always-on; 171 regulator-min-microvolt = <2500000>; 172 regulator-max-microvolt = <2500000>; 173 regulator-name = "vcc-pa"; 174}; 175 176®_aldo3 { 177 regulator-always-on; 178 regulator-min-microvolt = <2700000>; 179 regulator-max-microvolt = <3300000>; 180 regulator-name = "avcc"; 181}; 182 183®_dc1sw { 184 regulator-min-microvolt = <3000000>; 185 regulator-max-microvolt = <3000000>; 186 regulator-name = "vcc-gmac-phy"; 187}; 188 189®_dcdc1 { 190 regulator-always-on; 191 regulator-min-microvolt = <3000000>; 192 regulator-max-microvolt = <3000000>; 193 regulator-name = "vcc-3v0"; 194}; 195 196®_dcdc2 { 197 regulator-always-on; 198 regulator-min-microvolt = <1000000>; 199 regulator-max-microvolt = <1300000>; 200 regulator-name = "vdd-cpu"; 201}; 202 203®_dcdc3 { 204 regulator-always-on; 205 regulator-min-microvolt = <1000000>; 206 regulator-max-microvolt = <1300000>; 207 regulator-name = "vdd-sys"; 208}; 209 210®_dcdc5 { 211 regulator-always-on; 212 regulator-min-microvolt = <1500000>; 213 regulator-max-microvolt = <1500000>; 214 regulator-name = "vcc-dram"; 215}; 216 217®_dldo1 { 218 regulator-min-microvolt = <1800000>; 219 regulator-max-microvolt = <3300000>; 220 regulator-name = "vcc-wifi-io"; 221}; 222 223®_dldo2 { 224 regulator-min-microvolt = <3300000>; 225 regulator-max-microvolt = <3300000>; 226 regulator-name = "vcc-wifi"; 227}; 228 229&uart0 { 230 pinctrl-names = "default"; 231 pinctrl-0 = <&uart0_pb_pins>; 232 status = "okay"; 233}; 234 235&usbphy { 236 usb1_vbus-supply = <®_vcc5v0>; 237 usb2_vbus-supply = <®_vcc5v0>; 238 status = "okay"; 239}; 240