xref: /openbmc/u-boot/arch/arm/dts/sun8i-h3.dtsi (revision 8a23fc9c)
1/*
2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include "sunxi-h3-h5.dtsi"
44
45/ {
46	cpu0_opp_table: opp_table0 {
47		compatible = "operating-points-v2";
48		opp-shared;
49
50		opp@648000000 {
51			opp-hz = /bits/ 64 <648000000>;
52			opp-microvolt = <1040000 1040000 1300000>;
53			clock-latency-ns = <244144>; /* 8 32k periods */
54		};
55
56		opp@816000000 {
57			opp-hz = /bits/ 64 <816000000>;
58			opp-microvolt = <1100000 1100000 1300000>;
59			clock-latency-ns = <244144>; /* 8 32k periods */
60		};
61
62		opp@1008000000 {
63			opp-hz = /bits/ 64 <1008000000>;
64			opp-microvolt = <1200000 1200000 1300000>;
65			clock-latency-ns = <244144>; /* 8 32k periods */
66		};
67	};
68
69	cpus {
70		#address-cells = <1>;
71		#size-cells = <0>;
72
73		cpu0: cpu@0 {
74			compatible = "arm,cortex-a7";
75			device_type = "cpu";
76			reg = <0>;
77			clocks = <&ccu CLK_CPUX>;
78			clock-names = "cpu";
79			operating-points-v2 = <&cpu0_opp_table>;
80			#cooling-cells = <2>;
81		};
82
83		cpu@1 {
84			compatible = "arm,cortex-a7";
85			device_type = "cpu";
86			reg = <1>;
87			clocks = <&ccu CLK_CPUX>;
88			clock-names = "cpu";
89			operating-points-v2 = <&cpu0_opp_table>;
90			#cooling-cells = <2>;
91		};
92
93		cpu@2 {
94			compatible = "arm,cortex-a7";
95			device_type = "cpu";
96			reg = <2>;
97			clocks = <&ccu CLK_CPUX>;
98			clock-names = "cpu";
99			operating-points-v2 = <&cpu0_opp_table>;
100			#cooling-cells = <2>;
101		};
102
103		cpu@3 {
104			compatible = "arm,cortex-a7";
105			device_type = "cpu";
106			reg = <3>;
107			clocks = <&ccu CLK_CPUX>;
108			clock-names = "cpu";
109			operating-points-v2 = <&cpu0_opp_table>;
110			#cooling-cells = <2>;
111		};
112	};
113
114	timer {
115		compatible = "arm,armv7-timer";
116		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
117			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
118			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
119			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
120	};
121
122	soc {
123		system-control@1c00000 {
124			compatible = "allwinner,sun8i-h3-system-control";
125			reg = <0x01c00000 0x30>;
126			#address-cells = <1>;
127			#size-cells = <1>;
128			ranges;
129
130			sram_c: sram@1d00000 {
131				compatible = "mmio-sram";
132				reg = <0x01d00000 0x80000>;
133				#address-cells = <1>;
134				#size-cells = <1>;
135				ranges = <0 0x01d00000 0x80000>;
136
137				ve_sram: sram-section@0 {
138					compatible = "allwinner,sun8i-h3-sram-c1",
139						     "allwinner,sun4i-a10-sram-c1";
140					reg = <0x000000 0x80000>;
141				};
142			};
143		};
144
145		mali: gpu@1c40000 {
146			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
147			reg = <0x01c40000 0x10000>;
148			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
149				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
150				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
151				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
152				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
153				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
154				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
155			interrupt-names = "gp",
156					  "gpmmu",
157					  "pp0",
158					  "ppmmu0",
159					  "pp1",
160					  "ppmmu1",
161					  "pmu";
162			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
163			clock-names = "bus", "core";
164			resets = <&ccu RST_BUS_GPU>;
165
166			assigned-clocks = <&ccu CLK_GPU>;
167			assigned-clock-rates = <384000000>;
168		};
169	};
170};
171
172&ccu {
173	compatible = "allwinner,sun8i-h3-ccu";
174};
175
176&display_clocks {
177	compatible = "allwinner,sun8i-h3-de2-clk";
178};
179
180&mmc0 {
181	compatible = "allwinner,sun7i-a20-mmc";
182	clocks = <&ccu CLK_BUS_MMC0>,
183		 <&ccu CLK_MMC0>,
184		 <&ccu CLK_MMC0_OUTPUT>,
185		 <&ccu CLK_MMC0_SAMPLE>;
186	clock-names = "ahb",
187		      "mmc",
188		      "output",
189		      "sample";
190};
191
192&mmc1 {
193	compatible = "allwinner,sun7i-a20-mmc";
194	clocks = <&ccu CLK_BUS_MMC1>,
195		 <&ccu CLK_MMC1>,
196		 <&ccu CLK_MMC1_OUTPUT>,
197		 <&ccu CLK_MMC1_SAMPLE>;
198	clock-names = "ahb",
199		      "mmc",
200		      "output",
201		      "sample";
202};
203
204&mmc2 {
205	compatible = "allwinner,sun7i-a20-mmc";
206	clocks = <&ccu CLK_BUS_MMC2>,
207		 <&ccu CLK_MMC2>,
208		 <&ccu CLK_MMC2_OUTPUT>,
209		 <&ccu CLK_MMC2_SAMPLE>;
210	clock-names = "ahb",
211		      "mmc",
212		      "output",
213		      "sample";
214};
215
216&pio {
217	compatible = "allwinner,sun8i-h3-pinctrl";
218};
219