1/*
2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51	model = "Xunlong Orange Pi Plus";
52	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
53
54	aliases {
55		serial0 = &uart0;
56	};
57
58	chosen {
59		stdout-path = "serial0:115200n8";
60	};
61
62	reg_usb3_vbus: usb3-vbus {
63		compatible = "regulator-fixed";
64		pinctrl-names = "default";
65		pinctrl-0 = <&usb3_vbus_pin_a>;
66		regulator-name = "usb3-vbus";
67		regulator-min-microvolt = <5000000>;
68		regulator-max-microvolt = <5000000>;
69		regulator-boot-on;
70		enable-active-high;
71		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
72	};
73};
74
75&ehci1 {
76	status = "okay";
77};
78
79&ehci3 {
80	status = "okay";
81};
82
83&pio {
84	usb3_vbus_pin_a: usb3_vbus_pin@0 {
85		allwinner,pins = "PG11";
86		allwinner,function = "gpio_out";
87		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
88		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
89	};
90};
91
92&mmc0 {
93	pinctrl-names = "default";
94	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
95	vmmc-supply = <&reg_vcc3v3>;
96	bus-width = <4>;
97	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
98	cd-inverted;
99	status = "okay";
100};
101
102&reg_usb1_vbus {
103	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
104	status = "okay";
105};
106
107&uart0 {
108	pinctrl-names = "default";
109	pinctrl-0 = <&uart0_pins_a>;
110	status = "okay";
111};
112
113&usb1_vbus_pin_a {
114	allwinner,pins = "PG13";
115};
116
117&usbphy {
118	usb1_vbus-supply = <&reg_usb1_vbus>;
119	usb3_vbus-supply = <&reg_usb3_vbus>;
120	status = "okay";
121};
122