1/*
2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
44#include "sun8i-h3-orangepi-2.dts"
45
46/ {
47	model = "Xunlong Orange Pi Plus / Plus 2";
48	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
49
50	reg_gmac_3v3: gmac-3v3 {
51		compatible = "regulator-fixed";
52		pinctrl-names = "default";
53		pinctrl-0 = <&gmac_power_pin_orangepi>;
54		regulator-name = "gmac-3v3";
55		regulator-min-microvolt = <3300000>;
56		regulator-max-microvolt = <3300000>;
57		startup-delay-us = <100000>;
58		enable-active-high;
59		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
60	};
61
62	reg_usb3_vbus: usb3-vbus {
63		compatible = "regulator-fixed";
64		pinctrl-names = "default";
65		pinctrl-0 = <&usb3_vbus_pin_a>;
66		regulator-name = "usb3-vbus";
67		regulator-min-microvolt = <5000000>;
68		regulator-max-microvolt = <5000000>;
69		regulator-boot-on;
70		enable-active-high;
71		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
72	};
73};
74
75&ehci3 {
76	status = "okay";
77};
78
79&emac {
80	/* The Orange Pi Plus uses an external phy */
81	pinctrl-names = "default";
82	pinctrl-0 = <&emac_rgmii_pins>;
83	phy-supply = <&reg_gmac_3v3>;
84	phy-mode = "rgmii";
85};
86
87&external_mdio {
88	ext_rgmii_phy: ethernet-phy@1 {
89		compatible = "ethernet-phy-ieee802.3-c22";
90		reg = <0>;
91	};
92};
93
94&mmc2 {
95	pinctrl-names = "default";
96	pinctrl-0 = <&mmc2_8bit_pins>;
97	vmmc-supply = <&reg_vcc3v3>;
98	bus-width = <8>;
99	non-removable;
100	cap-mmc-hw-reset;
101	status = "okay";
102};
103
104&mmc2_8bit_pins {
105	/* Increase drive strength for DDR modes */
106	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
107	/* eMMC is missing pull-ups */
108	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
109};
110
111&pio {
112	gmac_power_pin_orangepi: gmac_power_pin@0 {
113		allwinner,pins = "PD6";
114		allwinner,function = "gpio_out";
115		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
116		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
117	};
118
119	usb3_vbus_pin_a: usb3_vbus_pin@0 {
120		allwinner,pins = "PG11";
121		allwinner,function = "gpio_out";
122		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
123		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
124	};
125};
126
127&usbphy {
128	usb3_vbus-supply = <&reg_usb3_vbus>;
129};
130