1/*
2 * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52	model = "Xunlong Orange Pi PC";
53	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
54
55	aliases {
56		serial0 = &uart0;
57	};
58
59	chosen {
60		stdout-path = "serial0:115200n8";
61	};
62
63	leds {
64		compatible = "gpio-leds";
65		pinctrl-names = "default";
66		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
67
68		pwr_led {
69			label = "orangepi:green:pwr";
70			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
71			default-state = "on";
72		};
73
74		status_led {
75			label = "orangepi:red:status";
76			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
77		};
78	};
79
80	r_gpio_keys {
81		compatible = "gpio-keys";
82		pinctrl-names = "default";
83		pinctrl-0 = <&sw_r_opc>;
84
85		sw4 {
86			label = "sw4";
87			linux,code = <BTN_0>;
88			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
89		};
90	};
91};
92
93&ehci1 {
94	status = "okay";
95};
96
97&ehci2 {
98	status = "okay";
99};
100
101&ehci3 {
102	status = "okay";
103};
104
105&ir {
106	pinctrl-names = "default";
107	pinctrl-0 = <&ir_pins_a>;
108	status = "okay";
109};
110
111&mmc0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
114	vmmc-supply = <&reg_vcc3v3>;
115	bus-width = <4>;
116	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
117	cd-inverted;
118	status = "okay";
119};
120
121&ohci1 {
122	status = "okay";
123};
124
125&ohci2 {
126	status = "okay";
127};
128
129&ohci3 {
130	status = "okay";
131};
132
133&pio {
134	leds_opc: led_pins@0 {
135		allwinner,pins = "PA15";
136		allwinner,function = "gpio_out";
137		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
138		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
139	};
140};
141
142&r_pio {
143	leds_r_opc: led_pins@0 {
144		allwinner,pins = "PL10";
145		allwinner,function = "gpio_out";
146		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
147		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
148	};
149
150	sw_r_opc: key_pins@0 {
151		allwinner,pins = "PL3";
152		allwinner,function = "gpio_in";
153		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
154		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
155	};
156};
157
158&uart0 {
159	pinctrl-names = "default";
160	pinctrl-0 = <&uart0_pins_a>;
161	status = "okay";
162};
163
164&usbphy {
165	/* USB VBUS is always on */
166	status = "okay";
167};
168
169&emac {
170	phy = <&phy1>;
171	phy-mode = "mii";
172	allwinner,use-internal-phy;
173	allwinner,leds-active-low;
174	status = "okay";
175	phy1: ethernet-phy@1 {
176		reg = <1>;
177	};
178};
179