1/*
2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52	model = "Xunlong Orange Pi One";
53	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
54
55	aliases {
56		ethernet0 = &emac;
57		serial0 = &uart0;
58	};
59
60	chosen {
61		stdout-path = "serial0:115200n8";
62	};
63
64	leds {
65		compatible = "gpio-leds";
66		pinctrl-names = "default";
67		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
68
69		pwr_led {
70			label = "orangepi:green:pwr";
71			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
72			default-state = "on";
73		};
74
75		status_led {
76			label = "orangepi:red:status";
77			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
78		};
79	};
80
81	r_gpio_keys {
82		compatible = "gpio-keys";
83		pinctrl-names = "default";
84		pinctrl-0 = <&sw_r_opc>;
85
86		sw4 {
87			label = "sw4";
88			linux,code = <BTN_0>;
89			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
90		};
91	};
92};
93
94&ehci1 {
95	status = "okay";
96};
97
98&emac {
99	phy-handle = <&int_mii_phy>;
100	phy-mode = "mii";
101	allwinner,leds-active-low;
102	status = "okay";
103};
104
105&mmc0 {
106	pinctrl-names = "default";
107	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
108	vmmc-supply = <&reg_vcc3v3>;
109	bus-width = <4>;
110	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
111	cd-inverted;
112	status = "okay";
113};
114
115&ohci1 {
116	status = "okay";
117};
118
119&pio {
120	leds_opc: led_pins@0 {
121		allwinner,pins = "PA15";
122		allwinner,function = "gpio_out";
123		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
124		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
125	};
126};
127
128&r_pio {
129	leds_r_opc: led_pins@0 {
130		allwinner,pins = "PL10";
131		allwinner,function = "gpio_out";
132		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
133		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
134	};
135
136	sw_r_opc: key_pins@0 {
137		allwinner,pins = "PL3";
138		allwinner,function = "gpio_in";
139		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
140		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
141	};
142};
143
144&uart0 {
145	pinctrl-names = "default";
146	pinctrl-0 = <&uart0_pins_a>;
147	status = "okay";
148};
149
150&usbphy {
151	/* USB VBUS is always on */
152	status = "okay";
153};
154