1/*
2 * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
3 * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License as
12 *     published by the Free Software Foundation; either version 2 of the
13 *     License, or (at your option) any later version.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun8i-h3.dtsi"
46#include "sunxi-common-regulators.dtsi"
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/input.h>
50
51/ {
52	aliases {
53		serial0 = &uart0;
54	};
55
56	chosen {
57		stdout-path = "serial0:115200n8";
58	};
59
60	leds {
61		compatible = "gpio-leds";
62		pinctrl-names = "default";
63		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
64
65		status {
66			label = "nanopi:blue:status";
67			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
68			linux,default-trigger = "heartbeat";
69		};
70
71		pwr {
72			label = "nanopi:green:pwr";
73			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
74			default-state = "on";
75		};
76	};
77
78	r_gpio_keys {
79		compatible = "gpio-keys";
80		input-name = "k1";
81		pinctrl-names = "default";
82		pinctrl-0 = <&sw_r_npi>;
83
84		k1 {
85			label = "k1";
86			linux,code = <KEY_POWER>;
87			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
88		};
89	};
90};
91
92&ehci3 {
93	status = "okay";
94};
95
96&mmc0 {
97	bus-width = <4>;
98	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
99	status = "okay";
100	vmmc-supply = <&reg_vcc3v3>;
101};
102
103&ohci3 {
104	status = "okay";
105};
106
107&pio {
108	leds_npi: led_pins {
109		pins = "PA10";
110		function = "gpio_out";
111	};
112};
113
114&r_pio {
115	leds_r_npi: led_pins {
116		pins = "PL10";
117		function = "gpio_out";
118	};
119
120	sw_r_npi: key_pins {
121		pins = "PL3";
122		function = "gpio_in";
123	};
124};
125
126&uart0 {
127	pinctrl-names = "default";
128	pinctrl-0 = <&uart0_pins_a>;
129	status = "okay";
130};
131
132&usbphy {
133	status = "okay";
134};
135