1/*
2 * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51	model = "FriendlyARM NanoPi NEO Air";
52	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
53
54	aliases {
55		serial0 = &uart0;
56	};
57
58	chosen {
59		stdout-path = "serial0:115200n8";
60	};
61
62	leds {
63		compatible = "gpio-leds";
64
65		pwr {
66			label = "nanopi:green:pwr";
67			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
68			default-state = "on";
69		};
70
71		status {
72			label = "nanopi:blue:status";
73			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
74		};
75	};
76};
77
78&mmc0 {
79	pinctrl-names = "default";
80	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
81	vmmc-supply = <&reg_vcc3v3>;
82	bus-width = <4>;
83	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
84	cd-inverted;
85	status = "okay";
86};
87
88&uart0 {
89	pinctrl-names = "default";
90	pinctrl-0 = <&uart0_pins_a>;
91	status = "okay";
92};
93
94&usbphy {
95	/* USB VBUS is always on */
96	status = "okay";
97};
98