xref: /openbmc/u-boot/arch/arm/dts/sun8i-a23.dtsi (revision a7da6f8c)
1/*
2 * Copyright 2014 Chen-Yu Tsai
3 *
4 * Chen-Yu Tsai <wens@csie.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45#include "sun8i-a23-a33.dtsi"
46
47/ {
48	memory {
49		reg = <0x40000000 0x40000000>;
50	};
51
52	clocks {
53		ahb1_gates: clk@01c20060 {
54			#clock-cells = <1>;
55			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
56			reg = <0x01c20060 0x8>;
57			clocks = <&ahb1>;
58			clock-indices = <1>, <6>,
59					<8>, <9>, <10>,
60					<13>, <14>,
61					<19>, <20>,
62					<21>, <24>, <26>,
63					<29>, <32>, <36>,
64					<40>, <44>, <46>,
65					<52>, <53>,
66					<54>, <57>;
67			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
68					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
69					"ahb1_nand", "ahb1_sdram",
70					"ahb1_hstimer", "ahb1_spi0",
71					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
72					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
73					"ahb1_csi", "ahb1_be",	"ahb1_fe",
74					"ahb1_gpu", "ahb1_msgbox",
75					"ahb1_spinlock", "ahb1_drc";
76		};
77
78		mbus_clk: clk@01c2015c {
79			#clock-cells = <0>;
80			compatible = "allwinner,sun8i-a23-mbus-clk";
81			reg = <0x01c2015c 0x4>;
82			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
83			clock-output-names = "mbus";
84		};
85	};
86
87	soc@01c00000 {
88		usb_otg: usb@01c19000 {
89			compatible = "allwinner,sun6i-a31-musb";
90			reg = <0x01c19000 0x0400>;
91			clocks = <&ahb1_gates 24>;
92			resets = <&ahb1_rst 24>;
93			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
94			interrupt-names = "mc";
95			phys = <&usbphy 0>;
96			phy-names = "usb";
97			extcon = <&usbphy 0>;
98			status = "disabled";
99		};
100
101		usbphy: phy@01c19400 {
102			compatible = "allwinner,sun8i-a23-usb-phy";
103			reg = <0x01c19400 0x10>,
104			      <0x01c1a800 0x4>;
105			reg-names = "phy_ctrl",
106				    "pmu1";
107			clocks = <&usb_clk 8>,
108				 <&usb_clk 9>;
109			clock-names = "usb0_phy",
110				      "usb1_phy";
111			resets = <&usb_clk 0>,
112				 <&usb_clk 1>;
113			reset-names = "usb0_reset",
114				      "usb1_reset";
115			status = "disabled";
116			#phy-cells = <1>;
117		};
118	};
119};
120
121&pio {
122	compatible = "allwinner,sun8i-a23-pinctrl";
123	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
124		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
125		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
126};
127