1/* 2 * Copyright 2015 Maxime Ripard 3 * 4 * Maxime Ripard <maxime.ripard@free-electrons.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45/dts-v1/; 46#include "sun8i-a23.dtsi" 47#include "sunxi-common-regulators.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/input/input.h> 51 52/ { 53 model = "Allwinner A23 Evaluation Board"; 54 compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23"; 55 56 aliases { 57 i2c0 = &i2c0; 58 i2c1 = &i2c1; 59 serial0 = &r_uart; 60 }; 61 62 chosen { 63 stdout-path = "serial0:115200n8"; 64 }; 65}; 66 67&i2c0 { 68 pinctrl-names = "default"; 69 pinctrl-0 = <&i2c0_pins_a>; 70 status = "okay"; 71}; 72 73&i2c1 { 74 pinctrl-names = "default"; 75 pinctrl-0 = <&i2c1_pins_a>; 76 status = "okay"; 77}; 78 79&lradc { 80 vref-supply = <®_vcc3v0>; 81 status = "okay"; 82 83 button@190 { 84 label = "Volume Up"; 85 linux,code = <KEY_VOLUMEUP>; 86 channel = <0>; 87 voltage = <190000>; 88 }; 89 90 button@390 { 91 label = "Volume Down"; 92 linux,code = <KEY_VOLUMEDOWN>; 93 channel = <0>; 94 voltage = <390000>; 95 }; 96 97 button@600 { 98 label = "Home"; 99 linux,code = <KEY_HOME>; 100 channel = <0>; 101 voltage = <600000>; 102 }; 103}; 104 105&mmc0 { 106 pinctrl-names = "default"; 107 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; 108 vmmc-supply = <®_vcc3v0>; 109 bus-width = <4>; 110 cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ 111 status = "okay"; 112}; 113 114&pio { 115 mmc0_cd_pin_evb: mmc0_cd_pin@0 { 116 pins = "PB4"; 117 function = "gpio_in"; 118 bias-pull-up; 119 }; 120}; 121 122/* 123 * The RX line has a non-populated resistance. In order to use it, you 124 * need to solder R207 on the back of the board in order to close the 125 * line and get a working UART. 126 */ 127&r_uart { 128 pinctrl-names = "default"; 129 pinctrl-0 = <&r_uart_pins_a>; 130 status = "okay"; 131}; 132