1/*
2 * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun7i-a20.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53#include <dt-bindings/interrupt-controller/irq.h>
54#include <dt-bindings/pinctrl/sun4i-a10.h>
55
56/ {
57	model = "Olimex A20-OLinuXino-LIME2";
58	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
59
60	aliases {
61		serial0 = &uart0;
62	};
63
64	chosen {
65		stdout-path = "serial0:115200n8";
66	};
67
68	leds {
69		compatible = "gpio-leds";
70		pinctrl-names = "default";
71		pinctrl-0 = <&led_pins_olinuxinolime>;
72
73		green {
74			label = "a20-olinuxino-lime2:green:usr";
75			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
76			default-state = "on";
77		};
78	};
79
80	reg_axp_ipsout: axp_ipsout {
81		compatible = "regulator-fixed";
82		regulator-name = "axp-ipsout";
83		regulator-min-microvolt = <5000000>;
84		regulator-max-microvolt = <5000000>;
85		regulator-always-on;
86	};
87};
88
89&ahci {
90	target-supply = <&reg_ahci_5v>;
91	status = "okay";
92};
93
94&ehci0 {
95	status = "okay";
96};
97
98&ehci1 {
99	status = "okay";
100};
101
102&gmac {
103	pinctrl-names = "default";
104	pinctrl-0 = <&gmac_pins_rgmii_a>;
105	phy = <&phy1>;
106	phy-mode = "rgmii";
107	status = "okay";
108
109	phy1: ethernet-phy@1 {
110		reg = <1>;
111	};
112};
113
114&i2c0 {
115	pinctrl-names = "default";
116	pinctrl-0 = <&i2c0_pins_a>;
117	status = "okay";
118
119	axp209: pmic@34 {
120		compatible = "x-powers,axp209";
121		reg = <0x34>;
122		interrupt-parent = <&nmi_intc>;
123		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
124
125		interrupt-controller;
126		#interrupt-cells = <1>;
127
128		acin-supply = <&reg_axp_ipsout>;
129		vin2-supply = <&reg_axp_ipsout>;
130		vin3-supply = <&reg_axp_ipsout>;
131		ldo24in-supply = <&reg_axp_ipsout>;
132		ldo3in-supply = <&reg_axp_ipsout>;
133
134		regulators {
135			vdd_rtc: ldo1 {
136				regulator-min-microvolt = <1300000>;
137				regulator-max-microvolt = <1300000>;
138				regulator-always-on;
139			};
140
141			avcc: ldo2 {
142				regulator-min-microvolt = <1800000>;
143				regulator-max-microvolt = <3300000>;
144				regulator-always-on;
145			};
146
147			vcc_csi0: ldo3 {
148				regulator-min-microvolt = <700000>;
149				regulator-max-microvolt = <3500000>;
150				regulator-always-on;
151			};
152
153			vcc_csi1: ldo4 {
154				regulator-min-microvolt = <1250000>;
155				regulator-max-microvolt = <3300000>;
156				regulator-always-on;
157			};
158
159			vdd_cpu: dcdc2 {
160				regulator-min-microvolt = <700000>;
161				regulator-max-microvolt = <2275000>;
162				regulator-always-on;
163			};
164
165			vdd_int: dcdc3 {
166				regulator-min-microvolt = <700000>;
167				regulator-max-microvolt = <3500000>;
168				regulator-always-on;
169			};
170		};
171	};
172};
173
174&i2c1 {
175	pinctrl-names = "default";
176	pinctrl-0 = <&i2c1_pins_a>;
177	status = "okay";
178};
179
180&mmc0 {
181	pinctrl-names = "default";
182	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
183	vmmc-supply = <&reg_vcc3v3>;
184	bus-width = <4>;
185	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
186	cd-inverted;
187	status = "okay";
188};
189
190&ohci0 {
191	status = "okay";
192};
193
194&ohci1 {
195	status = "okay";
196};
197
198&pio {
199	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
200		allwinner,pins = "PC3";
201		allwinner,function = "gpio_out";
202		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
203		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
204	};
205
206	led_pins_olinuxinolime: led_pins@0 {
207		allwinner,pins = "PH2";
208		allwinner,function = "gpio_out";
209		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
210		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
211	};
212};
213
214&reg_ahci_5v {
215	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
216	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
217	status = "okay";
218};
219
220&reg_usb1_vbus {
221	status = "okay";
222};
223
224&reg_usb2_vbus {
225	status = "okay";
226};
227
228&uart0 {
229	pinctrl-names = "default";
230	pinctrl-0 = <&uart0_pins_a>;
231	status = "okay";
232};
233
234&usbphy {
235	usb1_vbus-supply = <&reg_usb1_vbus>;
236	usb2_vbus-supply = <&reg_usb2_vbus>;
237	status = "okay";
238};
239