1/* 2 * Copyright 2015 Marcus Cooper 3 * 4 * Marcus Cooper <codekipper@gmail.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public 22 * License along with this file; if not, write to the Free 23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 24 * MA 02110-1301 USA 25 * 26 * Or, alternatively, 27 * 28 * b) Permission is hereby granted, free of charge, to any person 29 * obtaining a copy of this software and associated documentation 30 * files (the "Software"), to deal in the Software without 31 * restriction, including without limitation the rights to use, 32 * copy, modify, merge, publish, distribute, sublicense, and/or 33 * sell copies of the Software, and to permit persons to whom the 34 * Software is furnished to do so, subject to the following 35 * conditions: 36 * 37 * The above copyright notice and this permission notice shall be 38 * included in all copies or substantial portions of the Software. 39 * 40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 47 * OTHER DEALINGS IN THE SOFTWARE. 48 */ 49 50/dts-v1/; 51#include "sun7i-a20.dtsi" 52#include "sunxi-common-regulators.dtsi" 53 54#include <dt-bindings/gpio/gpio.h> 55#include <dt-bindings/interrupt-controller/irq.h> 56 57/ { 58 model = "mk808c"; 59 compatible = "allwinner,mk808c", "allwinner,sun7i-a20"; 60 61 aliases { 62 serial0 = &uart0; 63 serial1 = &uart2; 64 }; 65 66 chosen { 67 stdout-path = "serial0:115200n8"; 68 }; 69 70 hdmi-connector { 71 compatible = "hdmi-connector"; 72 type = "a"; 73 74 port { 75 hdmi_con_in: endpoint { 76 remote-endpoint = <&hdmi_out_con>; 77 }; 78 }; 79 }; 80}; 81 82&codec { 83 status = "okay"; 84}; 85 86&de { 87 status = "okay"; 88}; 89 90&ehci0 { 91 status = "okay"; 92}; 93 94&ehci1 { 95 status = "okay"; 96}; 97 98&hdmi { 99 status = "okay"; 100}; 101 102&hdmi_out { 103 hdmi_out_con: endpoint { 104 remote-endpoint = <&hdmi_con_in>; 105 }; 106}; 107 108&i2c0 { 109 pinctrl-names = "default"; 110 pinctrl-0 = <&i2c0_pins_a>; 111 status = "okay"; 112 113 axp209: pmic@34 { 114 compatible = "x-powers,axp209"; 115 reg = <0x34>; 116 interrupt-parent = <&nmi_intc>; 117 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 118 interrupt-controller; 119 #interrupt-cells = <1>; 120 }; 121}; 122 123&i2c1 { 124 pinctrl-names = "default"; 125 pinctrl-0 = <&i2c1_pins_a>; 126 status = "okay"; 127}; 128 129&i2c2 { 130 pinctrl-names = "default"; 131 pinctrl-0 = <&i2c2_pins_a>; 132 status = "okay"; 133}; 134 135&mmc0 { 136 pinctrl-names = "default"; 137 pinctrl-0 = <&mmc0_pins_a>; 138 vmmc-supply = <®_vcc3v0>; 139 bus-width = <4>; 140 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ 141 status = "okay"; 142}; 143 144&ohci0 { 145 status = "okay"; 146}; 147 148&ohci1 { 149 status = "okay"; 150}; 151 152&otg_sram { 153 status = "okay"; 154}; 155 156&pio { 157 usb0_id_detect_pin: usb0_id_detect_pin@0 { 158 pins = "PH4"; 159 function = "gpio_in"; 160 }; 161 162 usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { 163 pins = "PH5"; 164 function = "gpio_in"; 165 }; 166}; 167 168®_usb0_vbus { 169 status = "okay"; 170}; 171 172®_usb1_vbus { 173 status = "okay"; 174}; 175 176®_usb2_vbus { 177 status = "okay"; 178}; 179 180&uart0 { 181 pinctrl-names = "default"; 182 pinctrl-0 = <&uart0_pins_a>; 183 status = "okay"; 184}; 185 186&uart2 { 187 pinctrl-names = "default"; 188 pinctrl-0 = <&uart2_pins_a>; 189 status = "okay"; 190}; 191 192&usb_otg { 193 dr_mode = "otg"; 194 status = "okay"; 195}; 196 197&usbphy { 198 pinctrl-names = "default"; 199 pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; 200 usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ 201 usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ 202 usb0_vbus-supply = <®_usb0_vbus>; 203 usb1_vbus-supply = <®_usb1_vbus>; 204 usb2_vbus-supply = <®_usb2_vbus>; 205 status = "okay"; 206}; 207