1/*
2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49
50/ {
51	model = "Lamobo R1";
52	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
53
54	aliases {
55		serial0 = &uart0;
56		serial1 = &uart3;
57		serial2 = &uart7;
58	};
59
60	chosen {
61		stdout-path = "serial0:115200n8";
62	};
63
64	hdmi-connector {
65		compatible = "hdmi-connector";
66		type = "a";
67
68		port {
69			hdmi_con_in: endpoint {
70				remote-endpoint = <&hdmi_out_con>;
71			};
72		};
73	};
74
75	leds {
76		compatible = "gpio-leds";
77		pinctrl-names = "default";
78		pinctrl-0 = <&led_pins_lamobo_r1>;
79
80		green {
81			label = "lamobo_r1:green:usr";
82			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
83		};
84	};
85
86	reg_gmac_3v3: gmac-3v3 {
87		compatible = "regulator-fixed";
88		pinctrl-names = "default";
89		pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
90		regulator-name = "gmac-3v3";
91		regulator-min-microvolt = <3300000>;
92		regulator-max-microvolt = <3300000>;
93		startup-delay-us = <100000>;
94		enable-active-high;
95		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
96	};
97};
98
99&ahci {
100	target-supply = <&reg_ahci_5v>;
101	status = "okay";
102};
103
104&codec {
105	status = "okay";
106};
107
108&cpu0 {
109	cpu-supply = <&reg_dcdc2>;
110};
111
112&de {
113	status = "okay";
114};
115
116&ehci0 {
117	status = "okay";
118};
119
120&ehci1 {
121	status = "okay";
122};
123
124&gmac {
125	pinctrl-names = "default";
126	pinctrl-0 = <&gmac_pins_rgmii_a>;
127	phy-mode = "rgmii";
128	phy-supply = <&reg_gmac_3v3>;
129	status = "okay";
130
131	fixed-link {
132		speed = <1000>;
133		full-duplex;
134	};
135
136	mdio {
137		compatible = "snps,dwmac-mdio";
138		#address-cells = <1>;
139		#size-cells = <0>;
140
141		switch: ethernet-switch@1e {
142			compatible = "brcm,bcm53125";
143			reg = <30>;
144			#address-cells = <1>;
145			#size-cells = <0>;
146
147			ports {
148				#address-cells = <1>;
149				#size-cells = <0>;
150
151				port0: port@0 {
152					reg = <0>;
153					label = "lan2";
154				};
155
156				port1: port@1 {
157					reg = <1>;
158					label = "lan3";
159				};
160
161				port2: port@2 {
162					reg = <2>;
163					label = "lan4";
164				};
165
166				port3: port@3 {
167					reg = <3>;
168					label = "wan";
169				};
170
171				port4: port@4 {
172					reg = <4>;
173					label = "lan1";
174				};
175
176				port8: port@8 {
177					reg = <8>;
178					label = "cpu";
179					ethernet = <&gmac>;
180					phy-mode = "rgmii-txid";
181					fixed-link {
182						speed = <1000>;
183						full-duplex;
184					};
185				};
186			};
187		};
188	};
189};
190
191&hdmi {
192	status = "okay";
193};
194
195&hdmi_out {
196	hdmi_out_con: endpoint {
197		remote-endpoint = <&hdmi_con_in>;
198	};
199};
200
201&i2c0 {
202	pinctrl-names = "default";
203	pinctrl-0 = <&i2c0_pins_a>;
204	status = "okay";
205
206	axp209: pmic@34 {
207		reg = <0x34>;
208		interrupt-parent = <&nmi_intc>;
209		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
210	};
211};
212
213&i2c2 {
214	pinctrl-names = "default";
215	pinctrl-0 = <&i2c2_pins_a>;
216	status = "okay";
217};
218
219&ir0 {
220	pinctrl-names = "default";
221	pinctrl-0 = <&ir0_rx_pins_a>;
222	status = "okay";
223};
224
225&mmc0 {
226	pinctrl-names = "default";
227	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
228	vmmc-supply = <&reg_vcc3v3>;
229	bus-width = <4>;
230	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
231	status = "okay";
232};
233
234&ohci0 {
235	status = "okay";
236};
237
238&otg_sram {
239	status = "okay";
240};
241
242&pio {
243	usb0_id_detect_pin: usb0_id_detect_pin@0 {
244		pins = "PH4";
245		function = "gpio_in";
246		bias-pull-up;
247	};
248
249	mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
250		pins = "PH10";
251		function = "gpio_in";
252		bias-pull-up;
253	};
254
255	gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
256		pins = "PH23";
257		function = "gpio_out";
258	};
259
260	led_pins_lamobo_r1: led_pins@0 {
261		pins = "PH24";
262		function = "gpio_out";
263	};
264};
265
266#include "axp209.dtsi"
267
268&ac_power_supply {
269	status = "okay";
270};
271
272&battery_power_supply {
273	status = "okay";
274};
275
276&reg_ahci_5v {
277	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
278	status = "okay";
279};
280
281&reg_dcdc2 {
282	regulator-always-on;
283	regulator-min-microvolt = <1000000>;
284	regulator-max-microvolt = <1400000>;
285	regulator-name = "vdd-cpu";
286};
287
288&reg_dcdc3 {
289	regulator-always-on;
290	regulator-min-microvolt = <1000000>;
291	regulator-max-microvolt = <1400000>;
292	regulator-name = "vdd-int-dll";
293};
294
295&reg_ldo1 {
296	regulator-name = "vdd-rtc";
297};
298
299&reg_ldo2 {
300	regulator-always-on;
301	regulator-min-microvolt = <3000000>;
302	regulator-max-microvolt = <3000000>;
303	regulator-name = "avcc";
304};
305
306&reg_usb0_vbus {
307	status = "okay";
308};
309
310&reg_usb2_vbus {
311	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
312	status = "okay";
313};
314
315&spi0 {
316	pinctrl-names = "default";
317	pinctrl-0 = <&spi0_pins_a>,
318		    <&spi0_cs0_pins_a>,
319		    <&spi0_cs1_pins_a>;
320	status = "okay";
321};
322
323&uart0 {
324	pinctrl-names = "default";
325	pinctrl-0 = <&uart0_pins_a>;
326	status = "okay";
327};
328
329&uart3 {
330	pinctrl-names = "default";
331	pinctrl-0 = <&uart3_pins_b>;
332	status = "okay";
333};
334
335&uart7 {
336	pinctrl-names = "default";
337	pinctrl-0 = <&uart7_pins_a>;
338	status = "okay";
339};
340
341&usb_otg {
342	dr_mode = "otg";
343	status = "okay";
344};
345
346&usb_power_supply {
347	status = "okay";
348};
349
350&usbphy {
351	pinctrl-names = "default";
352	pinctrl-0 = <&usb0_id_detect_pin>;
353	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
354	usb0_vbus_power-supply = <&usb_power_supply>;
355	usb0_vbus-supply = <&reg_usb0_vbus>;
356	usb2_vbus-supply = <&reg_usb2_vbus>;
357	status = "okay";
358};
359