1/*
2 * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49#include <dt-bindings/pinctrl/sun4i-a10.h>
50
51/ {
52	model = "Lamobo R1";
53	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
54
55	aliases {
56		serial0 = &uart0;
57		serial1 = &uart3;
58		serial2 = &uart7;
59	};
60
61	chosen {
62		stdout-path = "serial0:115200n8";
63	};
64
65	leds {
66		compatible = "gpio-leds";
67		pinctrl-names = "default";
68		pinctrl-0 = <&led_pins_lamobo_r1>;
69
70		green {
71			label = "lamobo_r1:green:usr";
72			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
73		};
74	};
75
76	reg_gmac_3v3: gmac-3v3 {
77		compatible = "regulator-fixed";
78		pinctrl-names = "default";
79		pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
80		regulator-name = "gmac-3v3";
81		regulator-min-microvolt = <3300000>;
82		regulator-max-microvolt = <3300000>;
83		startup-delay-us = <100000>;
84		enable-active-high;
85		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
86	};
87};
88
89&ahci_pwr_pin_a {
90	allwinner,pins = "PB3";
91};
92
93&ahci {
94	target-supply = <&reg_ahci_5v>;
95	status = "okay";
96};
97
98&codec {
99	status = "okay";
100};
101
102&cpu0 {
103	cpu-supply = <&reg_dcdc2>;
104};
105
106&ehci0 {
107	status = "okay";
108};
109
110&ehci1 {
111	status = "okay";
112};
113
114&gmac {
115	pinctrl-names = "default";
116	pinctrl-0 = <&gmac_pins_rgmii_a>;
117	phy-mode = "rgmii";
118	phy-supply = <&reg_gmac_3v3>;
119	status = "okay";
120
121	fixed-link {
122		speed = <1000>;
123		full-duplex;
124	};
125
126	mdio {
127		compatible = "snps,dwmac-mdio";
128		#address-cells = <1>;
129		#size-cells = <0>;
130
131		switch: ethernet-switch@1e {
132			compatible = "brcm,bcm53125";
133			reg = <30>;
134			#address-cells = <1>;
135			#size-cells = <0>;
136
137			ports {
138				#address-cells = <1>;
139				#size-cells = <0>;
140
141				port0: port@0 {
142					reg = <0>;
143					label = "lan2";
144				};
145
146				port1: port@1 {
147					reg = <1>;
148					label = "lan3";
149				};
150
151				port2: port@2 {
152					reg = <2>;
153					label = "lan4";
154				};
155
156				port3: port@3 {
157					reg = <3>;
158					label = "wan";
159				};
160
161				port4: port@4 {
162					reg = <4>;
163					label = "lan1";
164				};
165
166				port8: port@8 {
167					reg = <8>;
168					label = "cpu";
169					ethernet = <&gmac>;
170					phy-mode = "rgmii";
171					fixed-link {
172						speed = <1000>;
173						full-duplex;
174					};
175				};
176			};
177		};
178	};
179};
180
181&i2c0 {
182	pinctrl-names = "default";
183	pinctrl-0 = <&i2c0_pins_a>;
184	status = "okay";
185
186	axp209: pmic@34 {
187		reg = <0x34>;
188		interrupt-parent = <&nmi_intc>;
189		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
190	};
191};
192
193&i2c2 {
194	pinctrl-names = "default";
195	pinctrl-0 = <&i2c2_pins_a>;
196	status = "okay";
197};
198
199&ir0 {
200	pinctrl-names = "default";
201	pinctrl-0 = <&ir0_rx_pins_a>;
202	status = "okay";
203};
204
205&mmc0 {
206	pinctrl-names = "default";
207	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
208	vmmc-supply = <&reg_vcc3v3>;
209	bus-width = <4>;
210	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
211	cd-inverted;
212	status = "okay";
213};
214
215&ohci0 {
216	status = "okay";
217};
218
219&otg_sram {
220	status = "okay";
221};
222
223&pio {
224	usb0_id_detect_pin: usb0_id_detect_pin@0 {
225		allwinner,pins = "PH4";
226		allwinner,function = "gpio_in";
227		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
228		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
229	};
230
231	mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
232		allwinner,pins = "PH10";
233		allwinner,function = "gpio_in";
234		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
235		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
236	};
237
238	gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
239		allwinner,pins = "PH23";
240		allwinner,function = "gpio_out";
241		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
242		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
243	};
244
245	led_pins_lamobo_r1: led_pins@0 {
246		allwinner,pins = "PH24";
247		allwinner,function = "gpio_out";
248		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
249		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
250	};
251};
252
253#include "axp209.dtsi"
254
255&reg_ahci_5v {
256	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
257	status = "okay";
258};
259
260&reg_dcdc2 {
261	regulator-always-on;
262	regulator-min-microvolt = <1000000>;
263	regulator-max-microvolt = <1400000>;
264	regulator-name = "vdd-cpu";
265};
266
267&reg_dcdc3 {
268	regulator-always-on;
269	regulator-min-microvolt = <1000000>;
270	regulator-max-microvolt = <1400000>;
271	regulator-name = "vdd-int-dll";
272};
273
274&reg_ldo1 {
275	regulator-name = "vdd-rtc";
276};
277
278&reg_ldo2 {
279	regulator-always-on;
280	regulator-min-microvolt = <3000000>;
281	regulator-max-microvolt = <3000000>;
282	regulator-name = "avcc";
283};
284
285&reg_usb0_vbus {
286	status = "okay";
287};
288
289&reg_usb2_vbus {
290	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
291	status = "okay";
292};
293
294&spi0 {
295	pinctrl-names = "default";
296	pinctrl-0 = <&spi0_pins_a>,
297		    <&spi0_cs0_pins_a>,
298		    <&spi0_cs1_pins_a>;
299	status = "okay";
300};
301
302&uart0 {
303	pinctrl-names = "default";
304	pinctrl-0 = <&uart0_pins_a>;
305	status = "okay";
306};
307
308&uart3 {
309	pinctrl-names = "default";
310	pinctrl-0 = <&uart3_pins_b>;
311	status = "okay";
312};
313
314&uart7 {
315	pinctrl-names = "default";
316	pinctrl-0 = <&uart7_pins_a>;
317	status = "okay";
318};
319
320&usb_otg {
321	dr_mode = "otg";
322	status = "okay";
323};
324
325&usb_power_supply {
326	status = "okay";
327};
328
329&usb2_vbus_pin_a {
330	allwinner,pins = "PH12";
331};
332
333&usbphy {
334	pinctrl-names = "default";
335	pinctrl-0 = <&usb0_id_detect_pin>;
336	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
337	usb0_vbus_power-supply = <&usb_power_supply>;
338	usb0_vbus-supply = <&reg_usb0_vbus>;
339	usb2_vbus-supply = <&reg_usb2_vbus>;
340	status = "okay";
341};
342