1/*
2 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-itead-core-common.dtsi"
46
47/ {
48	model = "Itead Ibox A20";
49	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
50
51	leds {
52		compatible = "gpio-leds";
53		pinctrl-names = "default";
54		pinctrl-0 = <&led_pins_itead_core>;
55
56		green {
57			label = "itead_core:green:usr";
58			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
59			default-state = "on";
60		};
61
62		blue {
63			label = "itead_core:blue:usr";
64			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
65			default-state = "on";
66		};
67	};
68};
69
70&ahci {
71	target-supply = <&reg_ahci_5v>;
72	status = "okay";
73};
74
75&codec {
76	status = "okay";
77};
78
79&gmac {
80	pinctrl-names = "default";
81	pinctrl-0 = <&gmac_pins_mii_a>;
82	phy = <&phy1>;
83	phy-mode = "mii";
84	status = "okay";
85
86	phy1: ethernet-phy@1 {
87		reg = <1>;
88	};
89};
90
91&i2c0 {
92	axp209: pmic@34 {
93		interrupt-parent = <&nmi_intc>;
94		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
95	};
96};
97
98&ir0 {
99	pinctrl-names = "default";
100	pinctrl-0 = <&ir0_rx_pins_a>;
101	status = "okay";
102};
103
104&mmc0 {
105	pinctrl-names = "default";
106	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
107	vmmc-supply = <&reg_vcc3v3>;
108	bus-width = <4>;
109	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
110	cd-inverted;
111	status = "okay";
112};
113
114&pio {
115	led_pins_itead_core: led_pins@0 {
116		allwinner,pins = "PH20","PH21";
117		allwinner,function = "gpio_out";
118		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
119		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
120	};
121};
122
123&reg_ahci_5v {
124	status = "okay";
125};
126