1/*
2 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-itead-core-common.dtsi"
46
47/ {
48	model = "Itead Ibox A20";
49	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
50
51	leds {
52		compatible = "gpio-leds";
53		pinctrl-names = "default";
54		pinctrl-0 = <&led_pins_itead_core>;
55
56		green {
57			label = "itead_core:green:usr";
58			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
59			default-state = "on";
60		};
61
62		blue {
63			label = "itead_core:blue:usr";
64			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
65			default-state = "on";
66		};
67	};
68
69	sound {
70		compatible = "simple-audio-card";
71		simple-audio-card,name = "On-board SPDIF";
72
73		simple-audio-card,cpu {
74			sound-dai = <&spdif>;
75		};
76
77		simple-audio-card,codec {
78			sound-dai = <&spdif_out>;
79		};
80	};
81
82	spdif_out: spdif-out {
83		#sound-dai-cells = <0>;
84		compatible = "linux,spdif-dit";
85	};
86};
87
88&ahci {
89	target-supply = <&reg_ahci_5v>;
90	status = "okay";
91};
92
93&codec {
94	status = "okay";
95};
96
97&gmac {
98	pinctrl-names = "default";
99	pinctrl-0 = <&gmac_pins_mii_a>;
100	phy = <&phy1>;
101	phy-mode = "mii";
102	status = "okay";
103
104	phy1: ethernet-phy@1 {
105		reg = <1>;
106	};
107};
108
109&i2c0 {
110	axp209: pmic@34 {
111		interrupt-parent = <&nmi_intc>;
112		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
113	};
114};
115
116&ir0 {
117	pinctrl-names = "default";
118	pinctrl-0 = <&ir0_rx_pins_a>;
119	status = "okay";
120};
121
122&mmc0 {
123	pinctrl-names = "default";
124	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
125	vmmc-supply = <&reg_vcc3v3>;
126	bus-width = <4>;
127	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
128	cd-inverted;
129	status = "okay";
130};
131
132&pio {
133	led_pins_itead_core: led_pins@0 {
134		allwinner,pins = "PH20","PH21";
135		allwinner,function = "gpio_out";
136		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
137		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
138	};
139};
140
141&reg_ahci_5v {
142	status = "okay";
143};
144
145&spdif {
146	pinctrl-names = "default";
147	pinctrl-0 = <&spdif_tx_pins_a>;
148	status = "okay";
149};
150