1/* 2 * Copyright 2013 Oliver Schinagl 3 * 4 * Oliver Schinagl <oliver@schinagl.nl> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45/dts-v1/; 46#include "sun7i-a20.dtsi" 47#include "sunxi-common-regulators.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51#include <dt-bindings/pinctrl/sun4i-a10.h> 52 53/ { 54 model = "Cubietech Cubietruck"; 55 compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; 56 57 aliases { 58 serial0 = &uart0; 59 }; 60 61 chosen { 62 stdout-path = "serial0:115200n8"; 63 }; 64 65 leds { 66 compatible = "gpio-leds"; 67 pinctrl-names = "default"; 68 pinctrl-0 = <&led_pins_cubietruck>; 69 70 blue { 71 label = "cubietruck:blue:usr"; 72 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; 73 }; 74 75 orange { 76 label = "cubietruck:orange:usr"; 77 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; 78 }; 79 80 white { 81 label = "cubietruck:white:usr"; 82 gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; 83 }; 84 85 green { 86 label = "cubietruck:green:usr"; 87 gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; 88 }; 89 }; 90 91 mmc3_pwrseq: mmc3_pwrseq { 92 compatible = "mmc-pwrseq-simple"; 93 pinctrl-names = "default"; 94 pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; 95 reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ 96 }; 97}; 98 99&ahci { 100 target-supply = <®_ahci_5v>; 101 status = "okay"; 102}; 103 104&codec { 105 status = "okay"; 106}; 107 108&cpu0 { 109 cpu-supply = <®_dcdc2>; 110}; 111 112&ehci0 { 113 status = "okay"; 114}; 115 116&ehci1 { 117 status = "okay"; 118}; 119 120&gmac { 121 pinctrl-names = "default"; 122 pinctrl-0 = <&gmac_pins_rgmii_a>; 123 phy = <&phy1>; 124 phy-mode = "rgmii"; 125 status = "okay"; 126 127 phy1: ethernet-phy@1 { 128 reg = <1>; 129 }; 130}; 131 132&i2c0 { 133 pinctrl-names = "default"; 134 pinctrl-0 = <&i2c0_pins_a>; 135 status = "okay"; 136 137 axp209: pmic@34 { 138 reg = <0x34>; 139 interrupt-parent = <&nmi_intc>; 140 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 141 }; 142}; 143 144&i2c1 { 145 pinctrl-names = "default"; 146 pinctrl-0 = <&i2c1_pins_a>; 147 status = "okay"; 148}; 149 150&i2c2 { 151 pinctrl-names = "default"; 152 pinctrl-0 = <&i2c2_pins_a>; 153 status = "okay"; 154}; 155 156&ir0 { 157 pinctrl-names = "default"; 158 pinctrl-0 = <&ir0_rx_pins_a>; 159 status = "okay"; 160}; 161 162&mmc0 { 163 pinctrl-names = "default"; 164 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; 165 vmmc-supply = <®_vcc3v3>; 166 bus-width = <4>; 167 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ 168 cd-inverted; 169 status = "okay"; 170}; 171 172&mmc3 { 173 pinctrl-names = "default"; 174 pinctrl-0 = <&mmc3_pins_a>; 175 vmmc-supply = <®_vcc3v3>; 176 mmc-pwrseq = <&mmc3_pwrseq>; 177 bus-width = <4>; 178 non-removable; 179 status = "okay"; 180 181 brcmf: bcrmf@1 { 182 reg = <1>; 183 compatible = "brcm,bcm4329-fmac"; 184 interrupt-parent = <&pio>; 185 interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ 186 interrupt-names = "host-wake"; 187 }; 188}; 189 190&mmc3_pins_a { 191 /* AP6210 requires pull-up */ 192 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 193}; 194 195&ohci0 { 196 status = "okay"; 197}; 198 199&ohci1 { 200 status = "okay"; 201}; 202 203&otg_sram { 204 status = "okay"; 205}; 206 207&pio { 208 ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { 209 allwinner,pins = "PH12"; 210 allwinner,function = "gpio_out"; 211 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 212 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 213 }; 214 215 led_pins_cubietruck: led_pins@0 { 216 allwinner,pins = "PH7", "PH11", "PH20", "PH21"; 217 allwinner,function = "gpio_out"; 218 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 219 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 220 }; 221 222 mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { 223 allwinner,pins = "PH9"; 224 allwinner,function = "gpio_out"; 225 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 226 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 227 }; 228 229 usb0_vbus_pin_a: usb0_vbus_pin@0 { 230 allwinner,pins = "PH17"; 231 allwinner,function = "gpio_out"; 232 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 233 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 234 }; 235 236 usb0_id_detect_pin: usb0_id_detect_pin@0 { 237 allwinner,pins = "PH19"; 238 allwinner,function = "gpio_in"; 239 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 240 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 241 }; 242 243 usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { 244 allwinner,pins = "PH22"; 245 allwinner,function = "gpio_in"; 246 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 247 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 248 }; 249}; 250 251&pwm { 252 pinctrl-names = "default"; 253 pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; 254 status = "okay"; 255}; 256 257®_ahci_5v { 258 pinctrl-0 = <&ahci_pwr_pin_cubietruck>; 259 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; 260 status = "okay"; 261}; 262 263#include "axp209.dtsi" 264 265®_dcdc2 { 266 regulator-always-on; 267 regulator-min-microvolt = <1000000>; 268 regulator-max-microvolt = <1450000>; 269 regulator-name = "vdd-cpu"; 270}; 271 272®_dcdc3 { 273 regulator-always-on; 274 regulator-min-microvolt = <1000000>; 275 regulator-max-microvolt = <1400000>; 276 regulator-name = "vdd-int-dll"; 277}; 278 279®_ldo1 { 280 regulator-name = "vdd-rtc"; 281}; 282 283®_ldo2 { 284 regulator-always-on; 285 regulator-min-microvolt = <3000000>; 286 regulator-max-microvolt = <3000000>; 287 regulator-name = "avcc"; 288}; 289 290®_usb0_vbus { 291 pinctrl-0 = <&usb0_vbus_pin_a>; 292 gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; 293 status = "okay"; 294}; 295 296®_usb1_vbus { 297 status = "okay"; 298}; 299 300®_usb2_vbus { 301 status = "okay"; 302}; 303 304&uart0 { 305 pinctrl-names = "default"; 306 pinctrl-0 = <&uart0_pins_a>; 307 status = "okay"; 308}; 309 310&usb_otg { 311 dr_mode = "otg"; 312 status = "okay"; 313}; 314 315&usbphy { 316 pinctrl-names = "default"; 317 pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; 318 usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ 319 usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ 320 usb0_vbus-supply = <®_usb0_vbus>; 321 usb1_vbus-supply = <®_usb1_vbus>; 322 usb2_vbus-supply = <®_usb2_vbus>; 323 status = "okay"; 324}; 325