1/*
2 * Copyright 2013 Oliver Schinagl
3 *
4 * Oliver Schinagl <oliver@schinagl.nl>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun7i-a20.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53	model = "Cubietech Cubietruck";
54	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
55
56	aliases {
57		serial0 = &uart0;
58	};
59
60	chosen {
61		stdout-path = "serial0:115200n8";
62	};
63
64	hdmi-connector {
65		compatible = "hdmi-connector";
66		type = "a";
67
68		port {
69			hdmi_con_in: endpoint {
70				remote-endpoint = <&hdmi_out_con>;
71			};
72		};
73	};
74
75	leds {
76		compatible = "gpio-leds";
77		pinctrl-names = "default";
78		pinctrl-0 = <&led_pins_cubietruck>;
79
80		blue {
81			label = "cubietruck:blue:usr";
82			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
83		};
84
85		orange {
86			label = "cubietruck:orange:usr";
87			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
88		};
89
90		white {
91			label = "cubietruck:white:usr";
92			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
93		};
94
95		green {
96			label = "cubietruck:green:usr";
97			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
98		};
99	};
100
101	mmc3_pwrseq: mmc3_pwrseq {
102		compatible = "mmc-pwrseq-simple";
103		pinctrl-names = "default";
104		pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
105		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
106	};
107
108	sound {
109		compatible = "simple-audio-card";
110		simple-audio-card,name = "On-board SPDIF";
111
112		simple-audio-card,cpu {
113			sound-dai = <&spdif>;
114		};
115
116		simple-audio-card,codec {
117			sound-dai = <&spdif_out>;
118		};
119	};
120
121	spdif_out: spdif-out {
122		#sound-dai-cells = <0>;
123		compatible = "linux,spdif-dit";
124	};
125};
126
127&ahci {
128	target-supply = <&reg_ahci_5v>;
129	status = "okay";
130};
131
132&codec {
133	status = "okay";
134};
135
136&cpu0 {
137	cpu-supply = <&reg_dcdc2>;
138};
139
140&de {
141	status = "okay";
142};
143
144&ehci0 {
145	status = "okay";
146};
147
148&ehci1 {
149	status = "okay";
150};
151
152&gmac {
153	pinctrl-names = "default";
154	pinctrl-0 = <&gmac_pins_rgmii_a>;
155	phy = <&phy1>;
156	phy-mode = "rgmii";
157	status = "okay";
158
159	phy1: ethernet-phy@1 {
160		reg = <1>;
161	};
162};
163
164&hdmi {
165	status = "okay";
166};
167
168&hdmi_out {
169	hdmi_out_con: endpoint {
170		remote-endpoint = <&hdmi_con_in>;
171	};
172};
173
174&i2c0 {
175	pinctrl-names = "default";
176	pinctrl-0 = <&i2c0_pins_a>;
177	status = "okay";
178
179	axp209: pmic@34 {
180		reg = <0x34>;
181		interrupt-parent = <&nmi_intc>;
182		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
183	};
184};
185
186&i2c1 {
187	pinctrl-names = "default";
188	pinctrl-0 = <&i2c1_pins_a>;
189	status = "okay";
190};
191
192&i2c2 {
193	pinctrl-names = "default";
194	pinctrl-0 = <&i2c2_pins_a>;
195	status = "okay";
196};
197
198&ir0 {
199	pinctrl-names = "default";
200	pinctrl-0 = <&ir0_rx_pins_a>;
201	status = "okay";
202};
203
204&mmc0 {
205	pinctrl-names = "default";
206	pinctrl-0 = <&mmc0_pins_a>;
207	vmmc-supply = <&reg_vcc3v3>;
208	bus-width = <4>;
209	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
210	status = "okay";
211};
212
213&mmc3 {
214	pinctrl-names = "default";
215	pinctrl-0 = <&mmc3_pins_a>;
216	vmmc-supply = <&reg_vcc3v3>;
217	mmc-pwrseq = <&mmc3_pwrseq>;
218	bus-width = <4>;
219	non-removable;
220	status = "okay";
221
222	brcmf: wifi@1 {
223		reg = <1>;
224		compatible = "brcm,bcm4329-fmac";
225		interrupt-parent = <&pio>;
226		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
227		interrupt-names = "host-wake";
228	};
229};
230
231&mmc3_pins_a {
232	/* AP6210 requires pull-up */
233	bias-pull-up;
234};
235
236&ohci0 {
237	status = "okay";
238};
239
240&ohci1 {
241	status = "okay";
242};
243
244&otg_sram {
245	status = "okay";
246};
247
248&pio {
249	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
250		pins = "PH12";
251		function = "gpio_out";
252	};
253
254	led_pins_cubietruck: led_pins@0 {
255		pins = "PH7", "PH11", "PH20", "PH21";
256		function = "gpio_out";
257	};
258
259	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
260		pins = "PH9";
261		function = "gpio_out";
262	};
263
264	usb0_vbus_pin_a: usb0_vbus_pin@0 {
265		pins = "PH17";
266		function = "gpio_out";
267	};
268
269	usb0_id_detect_pin: usb0_id_detect_pin@0 {
270		pins = "PH19";
271		function = "gpio_in";
272	};
273
274	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
275		pins = "PH22";
276		function = "gpio_in";
277	};
278};
279
280&pwm {
281	pinctrl-names = "default";
282	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
283	status = "okay";
284};
285
286&reg_ahci_5v {
287	pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
288	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
289	status = "okay";
290};
291
292#include "axp209.dtsi"
293
294&ac_power_supply {
295	status = "okay";
296};
297
298&battery_power_supply {
299	status = "okay";
300};
301
302&reg_dcdc2 {
303	regulator-always-on;
304	regulator-min-microvolt = <1000000>;
305	regulator-max-microvolt = <1450000>;
306	regulator-name = "vdd-cpu";
307};
308
309&reg_dcdc3 {
310	regulator-always-on;
311	regulator-min-microvolt = <1000000>;
312	regulator-max-microvolt = <1400000>;
313	regulator-name = "vdd-int-dll";
314};
315
316&reg_ldo1 {
317	regulator-name = "vdd-rtc";
318};
319
320&reg_ldo2 {
321	regulator-always-on;
322	regulator-min-microvolt = <3000000>;
323	regulator-max-microvolt = <3000000>;
324	regulator-name = "avcc";
325};
326
327&reg_usb0_vbus {
328	pinctrl-0 = <&usb0_vbus_pin_a>;
329	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
330	status = "okay";
331};
332
333&reg_usb1_vbus {
334	status = "okay";
335};
336
337&reg_usb2_vbus {
338	status = "okay";
339};
340
341&spdif {
342	pinctrl-names = "default";
343	pinctrl-0 = <&spdif_tx_pins_a>;
344	status = "okay";
345};
346
347&uart0 {
348	pinctrl-names = "default";
349	pinctrl-0 = <&uart0_pins_a>;
350	status = "okay";
351};
352
353&usb_otg {
354	dr_mode = "otg";
355	status = "okay";
356};
357
358&usb_power_supply {
359	status = "okay";
360};
361
362&usbphy {
363	pinctrl-names = "default";
364	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
365	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
366	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
367	usb0_vbus_power-supply = <&usb_power_supply>;
368	usb0_vbus-supply = <&reg_usb0_vbus>;
369	usb1_vbus-supply = <&reg_usb1_vbus>;
370	usb2_vbus-supply = <&reg_usb2_vbus>;
371	status = "okay";
372};
373