1/* 2 * Copyright 2016 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include "sunxi-common-regulators.dtsi" 44 45#include <dt-bindings/gpio/gpio.h> 46#include <dt-bindings/input/input.h> 47#include <dt-bindings/pinctrl/sun4i-a10.h> 48 49/ { 50 aliases { 51 serial0 = &uart0; 52 }; 53 54 chosen { 55 stdout-path = "serial0:115200n8"; 56 }; 57}; 58 59&cpu0 { 60 cpu-supply = <®_dcdc3>; 61}; 62 63&ehci0 { 64 /* Wifi is connected here */ 65 status = "okay"; 66}; 67 68&mmc0 { 69 pinctrl-names = "default"; 70 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; 71 vmmc-supply = <®_dcdc1>; 72 bus-width = <4>; 73 cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ 74 cd-inverted; 75 status = "okay"; 76}; 77 78&pio { 79 mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { 80 allwinner,pins = "PA8"; 81 allwinner,function = "gpio_in"; 82 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 83 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 84 }; 85 86 usb0_id_detect_pin: usb0_id_detect_pin@0 { 87 allwinner,pins = "PA15"; 88 allwinner,function = "gpio_in"; 89 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 90 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 91 }; 92}; 93 94&p2wi { 95 status = "okay"; 96 97 axp22x: pmic@68 { 98 compatible = "x-powers,axp221"; 99 reg = <0x68>; 100 interrupt-parent = <&nmi_intc>; 101 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 102 drivevbus-supply = <®_vcc5v0>; 103 x-powers,drive-vbus-en; 104 }; 105}; 106 107#include "axp22x.dtsi" 108 109®_aldo3 { 110 regulator-always-on; 111 regulator-min-microvolt = <2700000>; 112 regulator-max-microvolt = <3300000>; 113 regulator-name = "avcc"; 114}; 115 116®_dc1sw { 117 regulator-name = "vcc-lcd"; 118}; 119 120®_dc5ldo { 121 regulator-always-on; 122 regulator-min-microvolt = <700000>; 123 regulator-max-microvolt = <1320000>; 124 regulator-name = "vdd-cpus"; /* This is an educated guess */ 125}; 126 127®_dcdc1 { 128 regulator-always-on; 129 regulator-min-microvolt = <3000000>; 130 regulator-max-microvolt = <3000000>; 131 regulator-name = "vcc-3v0"; 132}; 133 134®_dcdc2 { 135 regulator-min-microvolt = <700000>; 136 regulator-max-microvolt = <1320000>; 137 regulator-name = "vdd-gpu"; 138}; 139 140®_dcdc3 { 141 regulator-always-on; 142 regulator-min-microvolt = <700000>; 143 regulator-max-microvolt = <1320000>; 144 regulator-name = "vdd-cpu"; 145}; 146 147®_dcdc4 { 148 regulator-always-on; 149 regulator-min-microvolt = <700000>; 150 regulator-max-microvolt = <1320000>; 151 regulator-name = "vdd-sys-dll"; 152}; 153 154®_dcdc5 { 155 regulator-always-on; 156 regulator-min-microvolt = <1500000>; 157 regulator-max-microvolt = <1500000>; 158 regulator-name = "vcc-dram"; 159}; 160 161®_dldo1 { 162 regulator-min-microvolt = <3300000>; 163 regulator-max-microvolt = <3300000>; 164 regulator-name = "vcc-wifi"; 165}; 166 167®_drivevbus { 168 regulator-name = "usb0-vbus"; 169 status = "okay"; 170}; 171 172&simplefb_lcd { 173 vcc-lcd-supply = <®_dc1sw>; 174}; 175 176&usb_otg { 177 dr_mode = "otg"; 178 status = "okay"; 179}; 180 181&usb_power_supply { 182 status = "okay"; 183}; 184 185&usbphy { 186 pinctrl-names = "default"; 187 pinctrl-0 = <&usb0_id_detect_pin>; 188 usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ 189 usb0_vbus_power-supply = <&usb_power_supply>; 190 usb0_vbus-supply = <®_drivevbus>; 191 usb1_vbus-supply = <®_dldo1>; 192 status = "okay"; 193}; 194