1/*
2 * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
3 * Copyright 2015 Karsten Merker <merker@debian.org>
4 * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun6i-a31s.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/input/input.h>
51#include <dt-bindings/pinctrl/sun4i-a10.h>
52
53/ {
54	model = "MSI Primo81 tablet";
55	compatible = "msi,primo81", "allwinner,sun6i-a31s";
56};
57
58&cpu0 {
59	cpu-supply = <&reg_dcdc3>;
60};
61
62&ehci0 {
63	/* rtl8188etv wifi is connected here */
64	status = "okay";
65};
66
67&i2c0 {
68	/* pull-ups and device VDDIO use AXP221 DLDO3 */
69	pinctrl-names = "default";
70	pinctrl-0 = <&i2c0_pins_a>;
71	status = "failed";
72};
73
74&i2c1 {
75	pinctrl-names = "default";
76	pinctrl-0 = <&i2c1_pins_a>;
77	status = "okay";
78
79	ctp@5d {
80		pinctrl-names = "default";
81		pinctrl-0 = <&gt911_int_primo81>;
82		compatible = "goodix,gt911";
83		reg = <0x5d>;
84		interrupt-parent = <&pio>;
85		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
86		touchscreen-swapped-x-y;
87	};
88};
89
90&i2c2 {
91	pinctrl-names = "default";
92	pinctrl-0 = <&i2c2_pins_a>;
93	status = "okay";
94
95	accelerometer@1c {
96		pinctrl-names = "default";
97		pinctrl-0 = <&mma8452_int_primo81>;
98		compatible = "fsl,mma8452";
99		reg = <0x1c>;
100		interrupt-parent = <&pio>;
101		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
102		#io-channel-cells = <1>;
103	};
104};
105
106&lradc {
107	vref-supply = <&reg_aldo3>;
108	status = "okay";
109
110	button@158 {
111		label = "Volume Up";
112		linux,code = <KEY_VOLUMEUP>;
113		channel = <0>;
114		voltage = <158730>;
115	};
116
117	button@349 {
118		label = "Volume Down";
119		linux,code = <KEY_VOLUMEDOWN>;
120		channel = <0>;
121		voltage = <349206>;
122	};
123};
124
125&mmc0 {
126	pinctrl-names = "default";
127	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
128	vmmc-supply = <&reg_dcdc1>;
129	bus-width = <4>;
130	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
131	cd-inverted;
132	status = "okay";
133};
134
135&pio {
136	gt911_int_primo81: gt911_int_pin@0 {
137		allwinner,pins = "PA3";
138		allwinner,function = "gpio_in";
139		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
140		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
141	};
142
143	mma8452_int_primo81: mma8452_int_pin@0 {
144		allwinner,pins = "PA9";
145		allwinner,function = "gpio_in";
146		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
147		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
148	};
149
150	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
151		allwinner,pins = "PA8";
152		allwinner,function = "gpio_in";
153		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
154		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
155	};
156};
157
158&p2wi {
159	status = "okay";
160
161	axp22x: pmic@68 {
162		compatible = "x-powers,axp221";
163		reg = <0x68>;
164		interrupt-parent = <&nmi_intc>;
165		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
166	};
167};
168
169#include "axp22x.dtsi"
170
171&reg_aldo3 {
172	regulator-always-on;
173	regulator-min-microvolt = <2700000>;
174	regulator-max-microvolt = <3300000>;
175	regulator-name = "avcc";
176};
177
178&reg_dc1sw {
179	regulator-name = "vcc-lcd";
180};
181
182&reg_dc5ldo {
183	regulator-min-microvolt = <700000>;
184	regulator-max-microvolt = <1320000>;
185	regulator-name = "vdd-cpus"; /* This is an educated guess */
186};
187
188&reg_dcdc1 {
189	regulator-always-on;
190	regulator-min-microvolt = <3000000>;
191	regulator-max-microvolt = <3000000>;
192	regulator-name = "vcc-3v0";
193};
194
195&reg_dcdc2 {
196	regulator-min-microvolt = <700000>;
197	regulator-max-microvolt = <1320000>;
198	regulator-name = "vdd-gpu";
199};
200
201&reg_dcdc3 {
202	regulator-always-on;
203	regulator-min-microvolt = <700000>;
204	regulator-max-microvolt = <1320000>;
205	regulator-name = "vdd-cpu";
206};
207
208&reg_dcdc4 {
209	regulator-always-on;
210	regulator-min-microvolt = <700000>;
211	regulator-max-microvolt = <1320000>;
212	regulator-name = "vdd-sys-dll";
213};
214
215&reg_dcdc5 {
216	regulator-always-on;
217	regulator-min-microvolt = <1500000>;
218	regulator-max-microvolt = <1500000>;
219	regulator-name = "vcc-dram";
220};
221
222&reg_dldo1 {
223	regulator-min-microvolt = <3300000>;
224	regulator-max-microvolt = <3300000>;
225	regulator-name = "vcc-wifi";
226};
227
228&reg_dldo3 {
229	regulator-min-microvolt = <2800000>;
230	regulator-max-microvolt = <2800000>;
231	regulator-name = "vddio-csi";
232};
233
234&reg_eldo3 {
235	regulator-min-microvolt = <1080000>;
236	regulator-max-microvolt = <1320000>;
237	regulator-name = "vdd-mipi-bridge";
238};
239
240&simplefb_lcd {
241	vcc-lcd-supply = <&reg_dc1sw>;
242	vdd-mipi-bridge-supply = <&reg_eldo3>;
243};
244
245&usb_otg {
246	/* otg support requires support for AXP221 usb-power-supply and GPIO */
247	dr_mode = "host";
248	status = "okay";
249};
250
251&usbphy {
252	usb1_vbus-supply = <&reg_dldo1>;
253	status = "okay";
254};
255