1/* 2 * Copyright 2013 Maxime Ripard 3 * 4 * Maxime Ripard <maxime.ripard@free-electrons.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45#include "skeleton.dtsi" 46 47#include <dt-bindings/interrupt-controller/arm-gic.h> 48#include <dt-bindings/thermal/thermal.h> 49 50#include <dt-bindings/pinctrl/sun4i-a10.h> 51 52/ { 53 interrupt-parent = <&gic>; 54 55 aliases { 56 ethernet0 = &gmac; 57 }; 58 59 chosen { 60 #address-cells = <1>; 61 #size-cells = <1>; 62 ranges; 63 64 framebuffer@0 { 65 compatible = "allwinner,simple-framebuffer", 66 "simple-framebuffer"; 67 allwinner,pipeline = "de_be0-lcd0-hdmi"; 68 clocks = <&pll6 0>; 69 status = "disabled"; 70 }; 71 72 framebuffer@1 { 73 compatible = "allwinner,simple-framebuffer", 74 "simple-framebuffer"; 75 allwinner,pipeline = "de_be0-lcd0"; 76 clocks = <&pll6 0>; 77 status = "disabled"; 78 }; 79 }; 80 81 timer { 82 compatible = "arm,armv7-timer"; 83 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 84 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 85 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 86 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 87 clock-frequency = <24000000>; 88 arm,cpu-registers-not-fw-configured; 89 }; 90 91 cpus { 92 enable-method = "allwinner,sun6i-a31"; 93 #address-cells = <1>; 94 #size-cells = <0>; 95 96 cpu0: cpu@0 { 97 compatible = "arm,cortex-a7"; 98 device_type = "cpu"; 99 reg = <0>; 100 clocks = <&cpu>; 101 clock-latency = <244144>; /* 8 32k periods */ 102 operating-points = < 103 /* kHz uV */ 104 1008000 1200000 105 864000 1200000 106 720000 1100000 107 480000 1000000 108 >; 109 #cooling-cells = <2>; 110 cooling-min-level = <0>; 111 cooling-max-level = <3>; 112 }; 113 114 cpu@1 { 115 compatible = "arm,cortex-a7"; 116 device_type = "cpu"; 117 reg = <1>; 118 }; 119 120 cpu@2 { 121 compatible = "arm,cortex-a7"; 122 device_type = "cpu"; 123 reg = <2>; 124 }; 125 126 cpu@3 { 127 compatible = "arm,cortex-a7"; 128 device_type = "cpu"; 129 reg = <3>; 130 }; 131 }; 132 133 thermal-zones { 134 cpu_thermal { 135 /* milliseconds */ 136 polling-delay-passive = <250>; 137 polling-delay = <1000>; 138 thermal-sensors = <&rtp>; 139 140 cooling-maps { 141 map0 { 142 trip = <&cpu_alert0>; 143 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 144 }; 145 }; 146 147 trips { 148 cpu_alert0: cpu_alert0 { 149 /* milliCelsius */ 150 temperature = <70000>; 151 hysteresis = <2000>; 152 type = "passive"; 153 }; 154 155 cpu_crit: cpu_crit { 156 /* milliCelsius */ 157 temperature = <100000>; 158 hysteresis = <2000>; 159 type = "critical"; 160 }; 161 }; 162 }; 163 }; 164 165 memory { 166 reg = <0x40000000 0x80000000>; 167 }; 168 169 pmu { 170 compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; 171 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 172 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, 173 <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, 174 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; 175 }; 176 177 clocks { 178 #address-cells = <1>; 179 #size-cells = <1>; 180 ranges; 181 182 osc24M: osc24M { 183 #clock-cells = <0>; 184 compatible = "fixed-clock"; 185 clock-frequency = <24000000>; 186 }; 187 188 osc32k: clk@0 { 189 #clock-cells = <0>; 190 compatible = "fixed-clock"; 191 clock-frequency = <32768>; 192 clock-output-names = "osc32k"; 193 }; 194 195 pll1: clk@01c20000 { 196 #clock-cells = <0>; 197 compatible = "allwinner,sun6i-a31-pll1-clk"; 198 reg = <0x01c20000 0x4>; 199 clocks = <&osc24M>; 200 clock-output-names = "pll1"; 201 }; 202 203 pll6: clk@01c20028 { 204 #clock-cells = <1>; 205 compatible = "allwinner,sun6i-a31-pll6-clk"; 206 reg = <0x01c20028 0x4>; 207 clocks = <&osc24M>; 208 clock-output-names = "pll6", "pll6x2"; 209 }; 210 211 cpu: cpu@01c20050 { 212 #clock-cells = <0>; 213 compatible = "allwinner,sun4i-a10-cpu-clk"; 214 reg = <0x01c20050 0x4>; 215 216 /* 217 * PLL1 is listed twice here. 218 * While it looks suspicious, it's actually documented 219 * that way both in the datasheet and in the code from 220 * Allwinner. 221 */ 222 clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; 223 clock-output-names = "cpu"; 224 }; 225 226 axi: axi@01c20050 { 227 #clock-cells = <0>; 228 compatible = "allwinner,sun4i-a10-axi-clk"; 229 reg = <0x01c20050 0x4>; 230 clocks = <&cpu>; 231 clock-output-names = "axi"; 232 }; 233 234 ahb1: ahb1@01c20054 { 235 #clock-cells = <0>; 236 compatible = "allwinner,sun6i-a31-ahb1-clk"; 237 reg = <0x01c20054 0x4>; 238 clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; 239 clock-output-names = "ahb1"; 240 241 /* 242 * Clock AHB1 from PLL6, instead of CPU/AXI which 243 * has rate changes due to cpufreq. Also the DMA 244 * controller requires AHB1 clocked from PLL6. 245 */ 246 assigned-clocks = <&ahb1>; 247 assigned-clock-parents = <&pll6 0>; 248 }; 249 250 ahb1_gates: clk@01c20060 { 251 #clock-cells = <1>; 252 compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; 253 reg = <0x01c20060 0x8>; 254 clocks = <&ahb1>; 255 clock-output-names = "ahb1_mipidsi", "ahb1_ss", 256 "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", 257 "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", 258 "ahb1_nand0", "ahb1_sdram", 259 "ahb1_gmac", "ahb1_ts", "ahb1_hstimer", 260 "ahb1_spi0", "ahb1_spi1", "ahb1_spi2", 261 "ahb1_spi3", "ahb1_otg", "ahb1_ehci0", 262 "ahb1_ehci1", "ahb1_ohci0", 263 "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve", 264 "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi", 265 "ahb1_hdmi", "ahb1_de0", "ahb1_de1", 266 "ahb1_fe0", "ahb1_fe1", "ahb1_mp", 267 "ahb1_gpu", "ahb1_deu0", "ahb1_deu1", 268 "ahb1_drc0", "ahb1_drc1"; 269 }; 270 271 apb1: apb1@01c20054 { 272 #clock-cells = <0>; 273 compatible = "allwinner,sun4i-a10-apb0-clk"; 274 reg = <0x01c20054 0x4>; 275 clocks = <&ahb1>; 276 clock-output-names = "apb1"; 277 }; 278 279 apb1_gates: clk@01c20068 { 280 #clock-cells = <1>; 281 compatible = "allwinner,sun6i-a31-apb1-gates-clk"; 282 reg = <0x01c20068 0x4>; 283 clocks = <&apb1>; 284 clock-output-names = "apb1_codec", "apb1_digital_mic", 285 "apb1_pio", "apb1_daudio0", 286 "apb1_daudio1"; 287 }; 288 289 apb2: clk@01c20058 { 290 #clock-cells = <0>; 291 compatible = "allwinner,sun4i-a10-apb1-clk"; 292 reg = <0x01c20058 0x4>; 293 clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; 294 clock-output-names = "apb2"; 295 }; 296 297 apb2_gates: clk@01c2006c { 298 #clock-cells = <1>; 299 compatible = "allwinner,sun6i-a31-apb2-gates-clk"; 300 reg = <0x01c2006c 0x4>; 301 clocks = <&apb2>; 302 clock-output-names = "apb2_i2c0", "apb2_i2c1", 303 "apb2_i2c2", "apb2_i2c3", 304 "apb2_uart0", "apb2_uart1", 305 "apb2_uart2", "apb2_uart3", 306 "apb2_uart4", "apb2_uart5"; 307 }; 308 309 mmc0_clk: clk@01c20088 { 310 #clock-cells = <1>; 311 compatible = "allwinner,sun4i-a10-mmc-clk"; 312 reg = <0x01c20088 0x4>; 313 clocks = <&osc24M>, <&pll6 0>; 314 clock-output-names = "mmc0", 315 "mmc0_output", 316 "mmc0_sample"; 317 }; 318 319 mmc1_clk: clk@01c2008c { 320 #clock-cells = <1>; 321 compatible = "allwinner,sun4i-a10-mmc-clk"; 322 reg = <0x01c2008c 0x4>; 323 clocks = <&osc24M>, <&pll6 0>; 324 clock-output-names = "mmc1", 325 "mmc1_output", 326 "mmc1_sample"; 327 }; 328 329 mmc2_clk: clk@01c20090 { 330 #clock-cells = <1>; 331 compatible = "allwinner,sun4i-a10-mmc-clk"; 332 reg = <0x01c20090 0x4>; 333 clocks = <&osc24M>, <&pll6 0>; 334 clock-output-names = "mmc2", 335 "mmc2_output", 336 "mmc2_sample"; 337 }; 338 339 mmc3_clk: clk@01c20094 { 340 #clock-cells = <1>; 341 compatible = "allwinner,sun4i-a10-mmc-clk"; 342 reg = <0x01c20094 0x4>; 343 clocks = <&osc24M>, <&pll6 0>; 344 clock-output-names = "mmc3", 345 "mmc3_output", 346 "mmc3_sample"; 347 }; 348 349 spi0_clk: clk@01c200a0 { 350 #clock-cells = <0>; 351 compatible = "allwinner,sun4i-a10-mod0-clk"; 352 reg = <0x01c200a0 0x4>; 353 clocks = <&osc24M>, <&pll6 0>; 354 clock-output-names = "spi0"; 355 }; 356 357 spi1_clk: clk@01c200a4 { 358 #clock-cells = <0>; 359 compatible = "allwinner,sun4i-a10-mod0-clk"; 360 reg = <0x01c200a4 0x4>; 361 clocks = <&osc24M>, <&pll6 0>; 362 clock-output-names = "spi1"; 363 }; 364 365 spi2_clk: clk@01c200a8 { 366 #clock-cells = <0>; 367 compatible = "allwinner,sun4i-a10-mod0-clk"; 368 reg = <0x01c200a8 0x4>; 369 clocks = <&osc24M>, <&pll6 0>; 370 clock-output-names = "spi2"; 371 }; 372 373 spi3_clk: clk@01c200ac { 374 #clock-cells = <0>; 375 compatible = "allwinner,sun4i-a10-mod0-clk"; 376 reg = <0x01c200ac 0x4>; 377 clocks = <&osc24M>, <&pll6 0>; 378 clock-output-names = "spi3"; 379 }; 380 381 usb_clk: clk@01c200cc { 382 #clock-cells = <1>; 383 #reset-cells = <1>; 384 compatible = "allwinner,sun6i-a31-usb-clk"; 385 reg = <0x01c200cc 0x4>; 386 clocks = <&osc24M>; 387 clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", 388 "usb_ohci0", "usb_ohci1", 389 "usb_ohci2"; 390 }; 391 392 /* 393 * The following two are dummy clocks, placeholders 394 * used in the gmac_tx clock. The gmac driver will 395 * choose one parent depending on the PHY interface 396 * mode, using clk_set_rate auto-reparenting. 397 * 398 * The actual TX clock rate is not controlled by the 399 * gmac_tx clock. 400 */ 401 mii_phy_tx_clk: clk@1 { 402 #clock-cells = <0>; 403 compatible = "fixed-clock"; 404 clock-frequency = <25000000>; 405 clock-output-names = "mii_phy_tx"; 406 }; 407 408 gmac_int_tx_clk: clk@2 { 409 #clock-cells = <0>; 410 compatible = "fixed-clock"; 411 clock-frequency = <125000000>; 412 clock-output-names = "gmac_int_tx"; 413 }; 414 415 gmac_tx_clk: clk@01c200d0 { 416 #clock-cells = <0>; 417 compatible = "allwinner,sun7i-a20-gmac-clk"; 418 reg = <0x01c200d0 0x4>; 419 clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; 420 clock-output-names = "gmac_tx"; 421 }; 422 }; 423 424 soc@01c00000 { 425 compatible = "simple-bus"; 426 #address-cells = <1>; 427 #size-cells = <1>; 428 ranges; 429 430 dma: dma-controller@01c02000 { 431 compatible = "allwinner,sun6i-a31-dma"; 432 reg = <0x01c02000 0x1000>; 433 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 434 clocks = <&ahb1_gates 6>; 435 resets = <&ahb1_rst 6>; 436 #dma-cells = <1>; 437 }; 438 439 mmc0: mmc@01c0f000 { 440 compatible = "allwinner,sun5i-a13-mmc"; 441 reg = <0x01c0f000 0x1000>; 442 clocks = <&ahb1_gates 8>, 443 <&mmc0_clk 0>, 444 <&mmc0_clk 1>, 445 <&mmc0_clk 2>; 446 clock-names = "ahb", 447 "mmc", 448 "output", 449 "sample"; 450 resets = <&ahb1_rst 8>; 451 reset-names = "ahb"; 452 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; 453 status = "disabled"; 454 #address-cells = <1>; 455 #size-cells = <0>; 456 }; 457 458 mmc1: mmc@01c10000 { 459 compatible = "allwinner,sun5i-a13-mmc"; 460 reg = <0x01c10000 0x1000>; 461 clocks = <&ahb1_gates 9>, 462 <&mmc1_clk 0>, 463 <&mmc1_clk 1>, 464 <&mmc1_clk 2>; 465 clock-names = "ahb", 466 "mmc", 467 "output", 468 "sample"; 469 resets = <&ahb1_rst 9>; 470 reset-names = "ahb"; 471 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 472 status = "disabled"; 473 #address-cells = <1>; 474 #size-cells = <0>; 475 }; 476 477 mmc2: mmc@01c11000 { 478 compatible = "allwinner,sun5i-a13-mmc"; 479 reg = <0x01c11000 0x1000>; 480 clocks = <&ahb1_gates 10>, 481 <&mmc2_clk 0>, 482 <&mmc2_clk 1>, 483 <&mmc2_clk 2>; 484 clock-names = "ahb", 485 "mmc", 486 "output", 487 "sample"; 488 resets = <&ahb1_rst 10>; 489 reset-names = "ahb"; 490 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 491 status = "disabled"; 492 #address-cells = <1>; 493 #size-cells = <0>; 494 }; 495 496 mmc3: mmc@01c12000 { 497 compatible = "allwinner,sun5i-a13-mmc"; 498 reg = <0x01c12000 0x1000>; 499 clocks = <&ahb1_gates 11>, 500 <&mmc3_clk 0>, 501 <&mmc3_clk 1>, 502 <&mmc3_clk 2>; 503 clock-names = "ahb", 504 "mmc", 505 "output", 506 "sample"; 507 resets = <&ahb1_rst 11>; 508 reset-names = "ahb"; 509 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; 510 status = "disabled"; 511 #address-cells = <1>; 512 #size-cells = <0>; 513 }; 514 515 usbphy: phy@01c19400 { 516 compatible = "allwinner,sun6i-a31-usb-phy"; 517 reg = <0x01c19400 0x10>, 518 <0x01c1a800 0x4>, 519 <0x01c1b800 0x4>; 520 reg-names = "phy_ctrl", 521 "pmu1", 522 "pmu2"; 523 clocks = <&usb_clk 8>, 524 <&usb_clk 9>, 525 <&usb_clk 10>; 526 clock-names = "usb0_phy", 527 "usb1_phy", 528 "usb2_phy"; 529 resets = <&usb_clk 0>, 530 <&usb_clk 1>, 531 <&usb_clk 2>; 532 reset-names = "usb0_reset", 533 "usb1_reset", 534 "usb2_reset"; 535 status = "disabled"; 536 #phy-cells = <1>; 537 }; 538 539 ehci0: usb@01c1a000 { 540 compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; 541 reg = <0x01c1a000 0x100>; 542 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 543 clocks = <&ahb1_gates 26>; 544 resets = <&ahb1_rst 26>; 545 phys = <&usbphy 1>; 546 phy-names = "usb"; 547 status = "disabled"; 548 }; 549 550 ohci0: usb@01c1a400 { 551 compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; 552 reg = <0x01c1a400 0x100>; 553 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 554 clocks = <&ahb1_gates 29>, <&usb_clk 16>; 555 resets = <&ahb1_rst 29>; 556 phys = <&usbphy 1>; 557 phy-names = "usb"; 558 status = "disabled"; 559 }; 560 561 ehci1: usb@01c1b000 { 562 compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; 563 reg = <0x01c1b000 0x100>; 564 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 565 clocks = <&ahb1_gates 27>; 566 resets = <&ahb1_rst 27>; 567 phys = <&usbphy 2>; 568 phy-names = "usb"; 569 status = "disabled"; 570 }; 571 572 ohci1: usb@01c1b400 { 573 compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; 574 reg = <0x01c1b400 0x100>; 575 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 576 clocks = <&ahb1_gates 30>, <&usb_clk 17>; 577 resets = <&ahb1_rst 30>; 578 phys = <&usbphy 2>; 579 phy-names = "usb"; 580 status = "disabled"; 581 }; 582 583 ohci2: usb@01c1c400 { 584 compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; 585 reg = <0x01c1c400 0x100>; 586 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 587 clocks = <&ahb1_gates 31>, <&usb_clk 18>; 588 resets = <&ahb1_rst 31>; 589 status = "disabled"; 590 }; 591 592 pio: pinctrl@01c20800 { 593 compatible = "allwinner,sun6i-a31-pinctrl"; 594 reg = <0x01c20800 0x400>; 595 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 596 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 597 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, 598 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 599 clocks = <&apb1_gates 5>; 600 gpio-controller; 601 interrupt-controller; 602 #interrupt-cells = <2>; 603 #size-cells = <0>; 604 #gpio-cells = <3>; 605 606 uart0_pins_a: uart0@0 { 607 allwinner,pins = "PH20", "PH21"; 608 allwinner,function = "uart0"; 609 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 610 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 611 }; 612 613 i2c0_pins_a: i2c0@0 { 614 allwinner,pins = "PH14", "PH15"; 615 allwinner,function = "i2c0"; 616 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 617 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 618 }; 619 620 i2c1_pins_a: i2c1@0 { 621 allwinner,pins = "PH16", "PH17"; 622 allwinner,function = "i2c1"; 623 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 624 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 625 }; 626 627 i2c2_pins_a: i2c2@0 { 628 allwinner,pins = "PH18", "PH19"; 629 allwinner,function = "i2c2"; 630 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 631 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 632 }; 633 634 mmc0_pins_a: mmc0@0 { 635 allwinner,pins = "PF0", "PF1", "PF2", 636 "PF3", "PF4", "PF5"; 637 allwinner,function = "mmc0"; 638 allwinner,drive = <SUN4I_PINCTRL_30_MA>; 639 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 640 }; 641 642 mmc1_pins_a: mmc1@0 { 643 allwinner,pins = "PG0", "PG1", "PG2", "PG3", 644 "PG4", "PG5"; 645 allwinner,function = "mmc1"; 646 allwinner,drive = <SUN4I_PINCTRL_30_MA>; 647 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 648 }; 649 650 gmac_pins_mii_a: gmac_mii@0 { 651 allwinner,pins = "PA0", "PA1", "PA2", "PA3", 652 "PA8", "PA9", "PA11", 653 "PA12", "PA13", "PA14", "PA19", 654 "PA20", "PA21", "PA22", "PA23", 655 "PA24", "PA26", "PA27"; 656 allwinner,function = "gmac"; 657 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 658 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 659 }; 660 661 gmac_pins_gmii_a: gmac_gmii@0 { 662 allwinner,pins = "PA0", "PA1", "PA2", "PA3", 663 "PA4", "PA5", "PA6", "PA7", 664 "PA8", "PA9", "PA10", "PA11", 665 "PA12", "PA13", "PA14", "PA15", 666 "PA16", "PA17", "PA18", "PA19", 667 "PA20", "PA21", "PA22", "PA23", 668 "PA24", "PA25", "PA26", "PA27"; 669 allwinner,function = "gmac"; 670 /* 671 * data lines in GMII mode run at 125MHz and 672 * might need a higher signal drive strength 673 */ 674 allwinner,drive = <SUN4I_PINCTRL_30_MA>; 675 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 676 }; 677 678 gmac_pins_rgmii_a: gmac_rgmii@0 { 679 allwinner,pins = "PA0", "PA1", "PA2", "PA3", 680 "PA9", "PA10", "PA11", 681 "PA12", "PA13", "PA14", "PA19", 682 "PA20", "PA25", "PA26", "PA27"; 683 allwinner,function = "gmac"; 684 /* 685 * data lines in RGMII mode use DDR mode 686 * and need a higher signal drive strength 687 */ 688 allwinner,drive = <SUN4I_PINCTRL_40_MA>; 689 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 690 }; 691 }; 692 693 ahb1_rst: reset@01c202c0 { 694 #reset-cells = <1>; 695 compatible = "allwinner,sun6i-a31-ahb1-reset"; 696 reg = <0x01c202c0 0xc>; 697 }; 698 699 apb1_rst: reset@01c202d0 { 700 #reset-cells = <1>; 701 compatible = "allwinner,sun6i-a31-clock-reset"; 702 reg = <0x01c202d0 0x4>; 703 }; 704 705 apb2_rst: reset@01c202d8 { 706 #reset-cells = <1>; 707 compatible = "allwinner,sun6i-a31-clock-reset"; 708 reg = <0x01c202d8 0x4>; 709 }; 710 711 timer@01c20c00 { 712 compatible = "allwinner,sun4i-a10-timer"; 713 reg = <0x01c20c00 0xa0>; 714 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, 715 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 716 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, 717 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, 718 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 719 clocks = <&osc24M>; 720 }; 721 722 wdt1: watchdog@01c20ca0 { 723 compatible = "allwinner,sun6i-a31-wdt"; 724 reg = <0x01c20ca0 0x20>; 725 }; 726 727 rtp: rtp@01c25000 { 728 compatible = "allwinner,sun6i-a31-ts"; 729 reg = <0x01c25000 0x100>; 730 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 731 #thermal-sensor-cells = <0>; 732 }; 733 734 uart0: serial@01c28000 { 735 compatible = "snps,dw-apb-uart"; 736 reg = <0x01c28000 0x400>; 737 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 738 reg-shift = <2>; 739 reg-io-width = <4>; 740 clocks = <&apb2_gates 16>; 741 resets = <&apb2_rst 16>; 742 dmas = <&dma 6>, <&dma 6>; 743 dma-names = "rx", "tx"; 744 status = "disabled"; 745 }; 746 747 uart1: serial@01c28400 { 748 compatible = "snps,dw-apb-uart"; 749 reg = <0x01c28400 0x400>; 750 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 751 reg-shift = <2>; 752 reg-io-width = <4>; 753 clocks = <&apb2_gates 17>; 754 resets = <&apb2_rst 17>; 755 dmas = <&dma 7>, <&dma 7>; 756 dma-names = "rx", "tx"; 757 status = "disabled"; 758 }; 759 760 uart2: serial@01c28800 { 761 compatible = "snps,dw-apb-uart"; 762 reg = <0x01c28800 0x400>; 763 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 764 reg-shift = <2>; 765 reg-io-width = <4>; 766 clocks = <&apb2_gates 18>; 767 resets = <&apb2_rst 18>; 768 dmas = <&dma 8>, <&dma 8>; 769 dma-names = "rx", "tx"; 770 status = "disabled"; 771 }; 772 773 uart3: serial@01c28c00 { 774 compatible = "snps,dw-apb-uart"; 775 reg = <0x01c28c00 0x400>; 776 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 777 reg-shift = <2>; 778 reg-io-width = <4>; 779 clocks = <&apb2_gates 19>; 780 resets = <&apb2_rst 19>; 781 dmas = <&dma 9>, <&dma 9>; 782 dma-names = "rx", "tx"; 783 status = "disabled"; 784 }; 785 786 uart4: serial@01c29000 { 787 compatible = "snps,dw-apb-uart"; 788 reg = <0x01c29000 0x400>; 789 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 790 reg-shift = <2>; 791 reg-io-width = <4>; 792 clocks = <&apb2_gates 20>; 793 resets = <&apb2_rst 20>; 794 dmas = <&dma 10>, <&dma 10>; 795 dma-names = "rx", "tx"; 796 status = "disabled"; 797 }; 798 799 uart5: serial@01c29400 { 800 compatible = "snps,dw-apb-uart"; 801 reg = <0x01c29400 0x400>; 802 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 803 reg-shift = <2>; 804 reg-io-width = <4>; 805 clocks = <&apb2_gates 21>; 806 resets = <&apb2_rst 21>; 807 dmas = <&dma 22>, <&dma 22>; 808 dma-names = "rx", "tx"; 809 status = "disabled"; 810 }; 811 812 i2c0: i2c@01c2ac00 { 813 compatible = "allwinner,sun6i-a31-i2c"; 814 reg = <0x01c2ac00 0x400>; 815 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 816 clocks = <&apb2_gates 0>; 817 resets = <&apb2_rst 0>; 818 status = "disabled"; 819 #address-cells = <1>; 820 #size-cells = <0>; 821 }; 822 823 i2c1: i2c@01c2b000 { 824 compatible = "allwinner,sun6i-a31-i2c"; 825 reg = <0x01c2b000 0x400>; 826 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 827 clocks = <&apb2_gates 1>; 828 resets = <&apb2_rst 1>; 829 status = "disabled"; 830 #address-cells = <1>; 831 #size-cells = <0>; 832 }; 833 834 i2c2: i2c@01c2b400 { 835 compatible = "allwinner,sun6i-a31-i2c"; 836 reg = <0x01c2b400 0x400>; 837 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 838 clocks = <&apb2_gates 2>; 839 resets = <&apb2_rst 2>; 840 status = "disabled"; 841 #address-cells = <1>; 842 #size-cells = <0>; 843 }; 844 845 i2c3: i2c@01c2b800 { 846 compatible = "allwinner,sun6i-a31-i2c"; 847 reg = <0x01c2b800 0x400>; 848 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 849 clocks = <&apb2_gates 3>; 850 resets = <&apb2_rst 3>; 851 status = "disabled"; 852 #address-cells = <1>; 853 #size-cells = <0>; 854 }; 855 856 gmac: ethernet@01c30000 { 857 compatible = "allwinner,sun7i-a20-gmac"; 858 reg = <0x01c30000 0x1054>; 859 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 860 interrupt-names = "macirq"; 861 clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; 862 clock-names = "stmmaceth", "allwinner_gmac_tx"; 863 resets = <&ahb1_rst 17>; 864 reset-names = "stmmaceth"; 865 snps,pbl = <2>; 866 snps,fixed-burst; 867 snps,force_sf_dma_mode; 868 status = "disabled"; 869 #address-cells = <1>; 870 #size-cells = <0>; 871 }; 872 873 timer@01c60000 { 874 compatible = "allwinner,sun6i-a31-hstimer", 875 "allwinner,sun7i-a20-hstimer"; 876 reg = <0x01c60000 0x1000>; 877 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, 878 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, 879 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, 880 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; 881 clocks = <&ahb1_gates 19>; 882 resets = <&ahb1_rst 19>; 883 }; 884 885 spi0: spi@01c68000 { 886 compatible = "allwinner,sun6i-a31-spi"; 887 reg = <0x01c68000 0x1000>; 888 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 889 clocks = <&ahb1_gates 20>, <&spi0_clk>; 890 clock-names = "ahb", "mod"; 891 dmas = <&dma 23>, <&dma 23>; 892 dma-names = "rx", "tx"; 893 resets = <&ahb1_rst 20>; 894 status = "disabled"; 895 }; 896 897 spi1: spi@01c69000 { 898 compatible = "allwinner,sun6i-a31-spi"; 899 reg = <0x01c69000 0x1000>; 900 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; 901 clocks = <&ahb1_gates 21>, <&spi1_clk>; 902 clock-names = "ahb", "mod"; 903 dmas = <&dma 24>, <&dma 24>; 904 dma-names = "rx", "tx"; 905 resets = <&ahb1_rst 21>; 906 status = "disabled"; 907 }; 908 909 spi2: spi@01c6a000 { 910 compatible = "allwinner,sun6i-a31-spi"; 911 reg = <0x01c6a000 0x1000>; 912 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 913 clocks = <&ahb1_gates 22>, <&spi2_clk>; 914 clock-names = "ahb", "mod"; 915 dmas = <&dma 25>, <&dma 25>; 916 dma-names = "rx", "tx"; 917 resets = <&ahb1_rst 22>; 918 status = "disabled"; 919 }; 920 921 spi3: spi@01c6b000 { 922 compatible = "allwinner,sun6i-a31-spi"; 923 reg = <0x01c6b000 0x1000>; 924 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; 925 clocks = <&ahb1_gates 23>, <&spi3_clk>; 926 clock-names = "ahb", "mod"; 927 dmas = <&dma 26>, <&dma 26>; 928 dma-names = "rx", "tx"; 929 resets = <&ahb1_rst 23>; 930 status = "disabled"; 931 }; 932 933 gic: interrupt-controller@01c81000 { 934 compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; 935 reg = <0x01c81000 0x1000>, 936 <0x01c82000 0x1000>, 937 <0x01c84000 0x2000>, 938 <0x01c86000 0x2000>; 939 interrupt-controller; 940 #interrupt-cells = <3>; 941 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 942 }; 943 944 rtc: rtc@01f00000 { 945 compatible = "allwinner,sun6i-a31-rtc"; 946 reg = <0x01f00000 0x54>; 947 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, 948 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 949 }; 950 951 nmi_intc: interrupt-controller@01f00c0c { 952 compatible = "allwinner,sun6i-a31-sc-nmi"; 953 interrupt-controller; 954 #interrupt-cells = <2>; 955 reg = <0x01f00c0c 0x38>; 956 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 957 }; 958 959 prcm@01f01400 { 960 compatible = "allwinner,sun6i-a31-prcm"; 961 reg = <0x01f01400 0x200>; 962 963 ar100: ar100_clk { 964 compatible = "allwinner,sun6i-a31-ar100-clk"; 965 #clock-cells = <0>; 966 clocks = <&osc32k>, <&osc24M>, <&pll6 0>, 967 <&pll6 0>; 968 clock-output-names = "ar100"; 969 }; 970 971 ahb0: ahb0_clk { 972 compatible = "fixed-factor-clock"; 973 #clock-cells = <0>; 974 clock-div = <1>; 975 clock-mult = <1>; 976 clocks = <&ar100>; 977 clock-output-names = "ahb0"; 978 }; 979 980 apb0: apb0_clk { 981 compatible = "allwinner,sun6i-a31-apb0-clk"; 982 #clock-cells = <0>; 983 clocks = <&ahb0>; 984 clock-output-names = "apb0"; 985 }; 986 987 apb0_gates: apb0_gates_clk { 988 compatible = "allwinner,sun6i-a31-apb0-gates-clk"; 989 #clock-cells = <1>; 990 clocks = <&apb0>; 991 clock-output-names = "apb0_pio", "apb0_ir", 992 "apb0_timer", "apb0_p2wi", 993 "apb0_uart", "apb0_1wire", 994 "apb0_i2c"; 995 }; 996 997 ir_clk: ir_clk { 998 #clock-cells = <0>; 999 compatible = "allwinner,sun4i-a10-mod0-clk"; 1000 clocks = <&osc32k>, <&osc24M>; 1001 clock-output-names = "ir"; 1002 }; 1003 1004 apb0_rst: apb0_rst { 1005 compatible = "allwinner,sun6i-a31-clock-reset"; 1006 #reset-cells = <1>; 1007 }; 1008 }; 1009 1010 cpucfg@01f01c00 { 1011 compatible = "allwinner,sun6i-a31-cpuconfig"; 1012 reg = <0x01f01c00 0x300>; 1013 }; 1014 1015 ir: ir@01f02000 { 1016 compatible = "allwinner,sun5i-a13-ir"; 1017 clocks = <&apb0_gates 1>, <&ir_clk>; 1018 clock-names = "apb", "ir"; 1019 resets = <&apb0_rst 1>; 1020 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 1021 reg = <0x01f02000 0x40>; 1022 status = "disabled"; 1023 }; 1024 1025 r_pio: pinctrl@01f02c00 { 1026 compatible = "allwinner,sun6i-a31-r-pinctrl"; 1027 reg = <0x01f02c00 0x400>; 1028 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, 1029 <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; 1030 clocks = <&apb0_gates 0>; 1031 resets = <&apb0_rst 0>; 1032 gpio-controller; 1033 interrupt-controller; 1034 #interrupt-cells = <2>; 1035 #size-cells = <0>; 1036 #gpio-cells = <3>; 1037 1038 ir_pins_a: ir@0 { 1039 allwinner,pins = "PL4"; 1040 allwinner,function = "s_ir"; 1041 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 1042 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 1043 }; 1044 1045 p2wi_pins: p2wi { 1046 allwinner,pins = "PL0", "PL1"; 1047 allwinner,function = "s_p2wi"; 1048 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 1049 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 1050 }; 1051 }; 1052 1053 p2wi: i2c@01f03400 { 1054 compatible = "allwinner,sun6i-a31-p2wi"; 1055 reg = <0x01f03400 0x400>; 1056 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 1057 clocks = <&apb0_gates 3>; 1058 clock-frequency = <100000>; 1059 resets = <&apb0_rst 3>; 1060 pinctrl-names = "default"; 1061 pinctrl-0 = <&p2wi_pins>; 1062 status = "disabled"; 1063 #address-cells = <1>; 1064 #size-cells = <0>; 1065 }; 1066 }; 1067}; 1068