1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun6i-a31.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51	model = "Mele A1000G Quad top set box";
52	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
53
54	aliases {
55		serial0 = &uart0;
56	};
57
58	chosen {
59		stdout-path = "serial0:115200n8";
60	};
61
62	leds {
63		compatible = "gpio-leds";
64		pinctrl-names = "default";
65		pinctrl-0 = <&led_pins_m9>;
66
67		blue {
68			label = "m9:blue:usr";
69			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
70		};
71	};
72};
73
74&ehci0 {
75	status = "okay";
76};
77
78&ehci1 {
79	status = "okay";
80};
81
82&gmac {
83	pinctrl-names = "default";
84	pinctrl-0 = <&gmac_pins_mii_a>;
85	phy = <&phy1>;
86	phy-mode = "mii";
87	status = "okay";
88
89	phy1: ethernet-phy@1 {
90		reg = <1>;
91	};
92};
93
94&ir {
95	pinctrl-names = "default";
96	pinctrl-0 = <&ir_pins_a>;
97	status = "okay";
98};
99
100&mmc0 {
101	pinctrl-names = "default";
102	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
103	vmmc-supply = <&reg_vcc3v3>;
104	bus-width = <4>;
105	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
106	cd-inverted;
107	status = "okay";
108};
109
110&pio {
111	led_pins_m9: led_pins@0 {
112		allwinner,pins = "PH13";
113		allwinner,function = "gpio_out";
114		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
115		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
116	};
117
118	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
119		allwinner,pins = "PH22";
120		allwinner,function = "gpio_in";
121		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
122		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
123	};
124
125	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
126		allwinner,pins = "PC27";
127		allwinner,function = "gpio_out";
128		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
129		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
130	};
131};
132
133&reg_usb1_vbus {
134	pinctrl-names = "default";
135	pinctrl-0 = <&usb1_vbus_pin_m9>;
136	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
137	status = "okay";
138};
139
140&uart0 {
141	pinctrl-names = "default";
142	pinctrl-0 = <&uart0_pins_a>;
143	status = "okay";
144};
145
146&usb_otg {
147	dr_mode = "host";
148	status = "okay";
149};
150
151&usbphy {
152	usb1_vbus-supply = <&reg_usb1_vbus>;
153	status = "okay";
154};
155