1/* 2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public 20 * License along with this file; if not, write to the Free 21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, 22 * MA 02110-1301 USA 23 * 24 * Or, alternatively, 25 * 26 * b) Permission is hereby granted, free of charge, to any person 27 * obtaining a copy of this software and associated documentation 28 * files (the "Software"), to deal in the Software without 29 * restriction, including without limitation the rights to use, 30 * copy, modify, merge, publish, distribute, sublicense, and/or 31 * sell copies of the Software, and to permit persons to whom the 32 * Software is furnished to do so, subject to the following 33 * conditions: 34 * 35 * The above copyright notice and this permission notice shall be 36 * included in all copies or substantial portions of the Software. 37 * 38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 45 * OTHER DEALINGS IN THE SOFTWARE. 46 */ 47 48/dts-v1/; 49#include "sun6i-a31.dtsi" 50#include "sunxi-common-regulators.dtsi" 51 52#include <dt-bindings/gpio/gpio.h> 53#include <dt-bindings/pinctrl/sun4i-a10.h> 54 55/ { 56 model = "Mele M9 / A1000G Quad top set box"; 57 compatible = "mele,m9", "allwinner,sun6i-a31"; 58 59 aliases { 60 serial0 = &uart0; 61 }; 62 63 chosen { 64 stdout-path = "serial0:115200n8"; 65 }; 66 67 leds { 68 compatible = "gpio-leds"; 69 pinctrl-names = "default"; 70 pinctrl-0 = <&led_pins_m9>; 71 72 blue { 73 label = "m9:blue:usr"; 74 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; 75 }; 76 }; 77}; 78 79&ehci0 { 80 status = "okay"; 81}; 82 83&ehci1 { 84 status = "okay"; 85}; 86 87&gmac { 88 pinctrl-names = "default"; 89 pinctrl-0 = <&gmac_pins_mii_a>; 90 phy = <&phy1>; 91 phy-mode = "mii"; 92 status = "okay"; 93 94 phy1: ethernet-phy@1 { 95 reg = <1>; 96 }; 97}; 98 99&ir { 100 pinctrl-names = "default"; 101 pinctrl-0 = <&ir_pins_a>; 102 status = "okay"; 103}; 104 105&mmc0 { 106 pinctrl-names = "default"; 107 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; 108 vmmc-supply = <®_vcc3v3>; 109 bus-width = <4>; 110 cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ 111 cd-inverted; 112 status = "okay"; 113}; 114 115&pio { 116 led_pins_m9: led_pins@0 { 117 allwinner,pins = "PH13"; 118 allwinner,function = "gpio_out"; 119 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 120 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 121 }; 122 123 mmc0_cd_pin_m9: mmc0_cd_pin@0 { 124 allwinner,pins = "PH22"; 125 allwinner,function = "gpio_in"; 126 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 127 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; 128 }; 129 130 usb1_vbus_pin_m9: usb1_vbus_pin@0 { 131 allwinner,pins = "PC27"; 132 allwinner,function = "gpio_out"; 133 allwinner,drive = <SUN4I_PINCTRL_10_MA>; 134 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; 135 }; 136}; 137 138®_usb1_vbus { 139 pinctrl-names = "default"; 140 pinctrl-0 = <&usb1_vbus_pin_m9>; 141 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; 142 status = "okay"; 143}; 144 145&uart0 { 146 pinctrl-names = "default"; 147 pinctrl-0 = <&uart0_pins_a>; 148 status = "okay"; 149}; 150 151&usbphy { 152 usb1_vbus-supply = <®_usb1_vbus>; 153 status = "okay"; 154}; 155