1/* 2 * Copyright 2015 Marcus Cooper <codekipper@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun6i-a31.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "Mele I7 Quad top set box"; 51 compatible = "mele,i7", "allwinner,sun6i-a31"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 hdmi-connector { 62 compatible = "hdmi-connector"; 63 type = "a"; 64 65 port { 66 hdmi_con_in: endpoint { 67 remote-endpoint = <&hdmi_out_con>; 68 }; 69 }; 70 }; 71 72 leds { 73 compatible = "gpio-leds"; 74 pinctrl-names = "default"; 75 pinctrl-0 = <&led_pins_i7>; 76 77 blue { 78 label = "i7:blue:usr"; 79 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; 80 }; 81 }; 82 83 sound { 84 compatible = "simple-audio-card"; 85 simple-audio-card,name = "On-board SPDIF"; 86 simple-audio-card,cpu { 87 sound-dai = <&spdif>; 88 }; 89 90 simple-audio-card,codec { 91 sound-dai = <&spdif_out>; 92 }; 93 }; 94 95 spdif_out: spdif-out { 96 #sound-dai-cells = <0>; 97 compatible = "linux,spdif-dit"; 98 }; 99}; 100 101&codec { 102 allwinner,audio-routing = 103 "Headphone", "HP"; 104 status = "okay"; 105}; 106 107&de { 108 status = "okay"; 109}; 110 111&ehci0 { 112 status = "okay"; 113}; 114 115&ehci1 { 116 status = "okay"; 117}; 118 119&gmac { 120 pinctrl-names = "default"; 121 pinctrl-0 = <&gmac_pins_mii_a>; 122 phy = <&phy1>; 123 phy-mode = "mii"; 124 status = "okay"; 125 126 phy1: ethernet-phy@1 { 127 reg = <1>; 128 }; 129}; 130 131&hdmi { 132 status = "okay"; 133}; 134 135&hdmi_out { 136 hdmi_out_con: endpoint { 137 remote-endpoint = <&hdmi_con_in>; 138 }; 139}; 140 141&ir { 142 pinctrl-names = "default"; 143 pinctrl-0 = <&ir_pins_a>; 144 status = "okay"; 145}; 146 147&mmc0 { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; 150 vmmc-supply = <®_vcc3v3>; 151 bus-width = <4>; 152 cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ 153 status = "okay"; 154}; 155 156&pio { 157 led_pins_i7: led_pins@0 { 158 pins = "PH13"; 159 function = "gpio_out"; 160 }; 161 162 mmc0_cd_pin_i7: mmc0_cd_pin@0 { 163 pins = "PH22"; 164 function = "gpio_in"; 165 bias-pull-up; 166 }; 167 168 usb1_vbus_pin_i7: usb1_vbus_pin@0 { 169 pins = "PC27"; 170 function = "gpio_out"; 171 }; 172}; 173 174®_usb1_vbus { 175 pinctrl-names = "default"; 176 pinctrl-0 = <&usb1_vbus_pin_i7>; 177 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; 178 status = "okay"; 179}; 180 181&spdif { 182 pinctrl-names = "default"; 183 pinctrl-0 = <&spdif_pins_a>; 184 spdif-out = "okay"; 185 status = "okay"; 186}; 187 188&tcon0 { 189 status = "okay"; 190}; 191 192&uart0 { 193 pinctrl-names = "default"; 194 pinctrl-0 = <&uart0_pins_a>; 195 status = "okay"; 196}; 197 198&usbphy { 199 usb1_vbus-supply = <®_usb1_vbus>; 200 status = "okay"; 201}; 202